Home  >  A/C Parts  >  Valves & Refrigeration (Globe,Chk, Ball)  > Ball Valve with Access Fitting 1/2" OD Welded Seams Used with CO2, CFC,

Ball Valve with Access Fitting 1/2" OD Welded Seams Used with CO2, CFC, HFC & HCFC Refrigerants

Item #:586WAS-8ST 
Manufacturer Item: 586WAS-8ST
Manufacturer: SUPERIOR HVACR PRODUCTS
Sherwood Valve 586WAS-8ST Forged Brass Welded Ball Valve with Access Fitting 1/2" OD
586WAS-8ST
A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.
  • Includes access fitting on tube extension
  • Polished brass or carbon steel ball resists corrosion
  • Seal cap design allows operation without removal of cap
  • PTFE ball seals and gaskets ensure tight leak-free valve
  • Full-size ports for unrestricted flow
  • Forged seal cap
  • Seal cap design permits valve operation without removal of seal cap
  • Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507
Sid Harvey Item #:586WAS-8ST: Replaces Part #:'s : ABV4A | ABV4 |,
,

Valves & Refrigeration (Globe,Chk, Ball)

Brand Name
Sherwood Valve
Size
Ball Valve
Type
Ball Valve
Part Type
Ball Valve
With Tap
Yes
Connection Type
1/2"
586WAS-8ST
Ball Valve with Access Fitting 1/2" OD Welded Seams Used with CO2, CFC, HFC & HCFC Refrigerants
Quantity: