Home  >  A/C Equipment  >  Blower Coils Air Handlers  > Air Handler Non-Communicating 3 Ton 208/230 VAC 1 Stage

Air Handler Non-Communicating 3 Ton 208/230 VAC 1 Stage Installed TXV PSC 17-1/2" W x 42-1/2" H x 22"

Item #:FH3617TPSJSN 
Manufacturer Item: FH3617TPSJSN
Manufacturer: FUJITSU
Blower Coils Air Handlers FH3617TPSJSN
BTU: 36000 - Voltage: 208/230 - Position: Multi-Position - Refrigerant: R410A - Height: 42-1/2"
FH-AIR HANDLERS
Fujitsu FH3017TPSJSN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections
  • 36K BTU 3 Ton
  • 208/230/1 VAC
  • 17" Wide
  • PSC Motor
  • Multi-Position,
    ,

Blower Coils Air Handlers

Brand Name
Fujitsu
BTU
36000
Position
Multi-Position
Voltage
208/230
Depth
22"
Refrigerant
R410A
Width
17-1/2"
Height
42-1/2"
ATP1

Air Handler Attic Utility Lift 250 Lbs. Adjustable from 14" to 24 20' Cable Length

Sealed Unit Parts ATP1 Air Handler Lift 250 Lbs.
Item #:
ATP1
ET75

Easy Clean-Out Condensate Tee W/Access Port

Diversitech ET75 Easy Clean-Out Tee W/Access Port
Item #:
ET75
EZT-113B

EZ Trap Kit 3/4" No/Brush Less Switch

RectorSeal EZT-113B EZ Trap Kit 3/4" With Brush Less Switch
Item #:
EZT-113B
EZT-150

EZ Trap Kit 3/4" W/Brush Includes Switch

RectorSeal EZT-150 EZ Trap Kit 3/4" With Brush Less Switch
Item #:
EZT-150
EZT-210

EZ Trap Kit 3/4" Smart Trap 3/4" W/Brush

RectorSeal EZT-210 EZ Trap Smart Trap Kit 3/4" W/Brush
Item #:
EZT-210
EZT-225

Inline Universal Primary/Secondary Overflow Switch 3/4"

RectorSeal EZT-225 Inline Universal Primary/Secondary Overflow Switch 3/4"
Item #:
EZT-225
EZT-113B

EZ Trap Kit 3/4" No/Brush Less Switch

RectorSeal EZT-113B EZ Trap Kit 3/4" With Brush Less Switch
FH-AIR HANDLERS
Air Handler Non-Communicating 3 Ton 208/230 VAC 1 Stage Installed TXV PSC 17-1/2" W x 42-1/2" H x 22"
Quantity: