Bell & Gossett Red Fox 103251 1-Speed Circulator Pump, 1/25 HP, 115 VAC , 2940 RPM , 0 - 22 gpm

• Double-sintered carbon bearing
• Ceramic shaft
• High starting torque provides years of trouble-free start-ups
• Unique B&G DuraGlide bearing system assures whisper - quiet, maintenance-free operation
• Closed impeller design improves operating efficiency
• Wet rotor circulator
• Stabilized, heat resistant, non-metallic impeller. Its closed design improves operating efficiency
• Self-cleaning particle shield protects the shaft and bearings from system start-up debris

Sid Harvey Item #:B50-54: Replaces Part #:'s : 3704,
,

Bell & Gossett B50-50

Bell & Gossett B138 F3 Brass Dual Unit Valve 1/2" NPT 30 PSI Relief 12 PSI Reducing
Reducing valves fill the system to a preset pressure for optimum performance. Combination dual unit valves include pressure reducing valve and relief valve. Both Valves are equipped with an EPDM diaphragm. The diaphragm operated relief valve operates with a low differential between opening and closing pressures. The diaphragm operated pressure reducing valve is equipped with an inlet strainer and built-in low inlet pressure check valve.

• Low inlet pressure check valve help prevent loss of system pressure if the supply water drops below system pressure
• Convenient cleanable strainer is designed to prevent dirt and sediment from entering the system
• Relief and FB-38 pressure reducing component valves

Sid Harvey Item #:B138: Replaces Part #:'s : 36861,
,

Bell & Gossett 401455

Browning Super Gripbelt Wrapped construction provides smooth quiet operation, single fabric design allows greater flexibility

Wrapped Belts are more tolerant to slipping and misalignment than Raw Edge Belts

Close belt tolerance - browning belts offer the"Code 1" Match belt system on all classical and"358" belts, allowing easy selection of just one match number for each belt size, this ensures tighter than RMA standards

High tensile cord specially treated cords to provide strength and additional flex life while providing resistance to elongation for the belt

Static conducting

1 year warranty

Browning Belt B33

Bell & Gossett 100NFI In-Line Circulator Pump, 1/12 HP, 115 VAC , 0 - 33 gpm

• The shaft and seal are housed in an assembly that can be easily repaired or replaced
• This pump's motor design, coupled with its overall hydraulic performance, allows the Bell & Gossett series 100 to overcome system-related noise caused by valves, fittings or piping
• Resilient mounting provides quiet, dependable service with minimum annual lubrication
• Features a precision ground pump shaft is oversized to provide large bearing surfaces and a hardened integral thrust collar minimizes end-thrust to ensure long seal and bearing life
• Carbon steel shaft

Sid Harvey Item #:B51: Replaces Part #:'s : 3406,
,

Bell & Gossett B50-54

Bell & Gossett B146-12 Flo-Control SA-1-1/4 Iron 3-Way Straight-Angle Valve, 1-1/4", NPT

• Combination straight-angle patterns permitting installation in either horizontal or vertical pipe lines
• Asbestos-free packing and gasket

Sid Harvey Item #:B146-12: Replaces Part #:'s : 3780
,
,

Bell & Gossett B146-11

Bell & Gossett B146-13 Cast Iron Flow Control Valve 1-1/2" Screwed/Flange
Flo-Control valves are used for preventing gravity flow in forced water systems and to permit summer-winter operation of indirect water heaters. Flo-Control valves in NPT sizes 3/4 - 2" are made in combination straight-angle patterns permitting installation in either horizontal or vertical pipe lines. Larger sizes may be furnished in either straight or angle patterns. Removable top cap allows easy cleaning and service without removing pipe connections. Manual operating position for vertical lift disc to permit gravity circulation.

• Iron with screwed and flanged ends connections
• Asbestos-free packing and gasket
• Straight angle piping configuration

Sid Harvey Item #:B146-13,
,

Bell & Gossett B146-13

Bell & Gossett B138-12A Lead Free Brass Low Pressure Valve 1/2" Union FPT x Sweat 10-25 PSI
Reducing valves protect heating and plumbing systems against excessive line pressures. They are factory set at specified limits although adjustment is easily made. Equipped with built-in-strainer and low inlet pressure check valve.

• Fast fill feature reduces start-up time and labor
• Low inlet pressure check valve help prevent loss of system pressure if the supply water drops below system pressure
• Convenient cleanable strainer is designed to prevent dirt and sediment from entering the system
• Flexible system connection
• Brass body construction is highly resistant to corrosion - ideal for water systems
• Protect heating and plumbing systems against excessive line pressures
• Equipped with built-in-strainer and low inlet pressure check valve
• Includes tailpiece
• Construction: diaphragm EPT with special insert, EPDM check valve and insert, brass valve plate, strainer and strainer nut wetted parts, steel non-wetted parts
• 12 psig factory set pressure, 125 psig maximum working pressure

Sid Harvey Item #:B138-12A: Replaces Part #:'s : B143-13 | B143-13R | B144-5,

,

Bell & Gossett B138-12