K-Flex Pipe Insulation
5/8" X 1" X 6'

K-Flex J4-2

Armacell BST05834 Pipe Insulation with Lap Seal 5/8" x 3/4" x 6' Microban Antimicrobial, Closed-Cell Foam Polyethylene foam pipe insulation. Its closed cell structure won't wick moisture and helps prevent the absorption of condensation that could cause mold to develop over time. Imcoa SS has an easy to install self seal closure system. Imcoa pipe insulation is semi-slit, and can be completely slit by hand. Imcoa SS is pre-slit with a factory applied pressure sensitive adhesive (PSA) to both seam surfaces and has a release liner for easy installation. All butt joints should be properly sealed. Imcoa and Imcoa SS are easy to cut with a knife and can be fabricated to go around p-traps and fittings.

• CFC/HCFC free
• Non-porous
• Low VOCs
• Halogen free
• Fiber free
• Resistant to mold growth

,
,

Aeroflex is a flexible, closed-cell elastomeric tube insulation product used to conserve energy and prevent condensation on piping applications. The product's closed-cell structure creates exceptional thermal properties (k-value of 0.245 at 75 deg F and wvt of 0.03 perm-in) that protect against moisture penetration in applications within a -297 to 220 deg F temperature range. K-Flex Insul-Tube is widely used for its cold weather flexibility, durable skin surface, exacting manufacturing tolerances and lasting performance.

• Insulated tube pipe insulation is an elastomeric material that helps retard heat loss, prevents condensation and provides effective moisture vapor resistance
• Environmentally friendly, CFC free, mould and mildew resistant, fiber free and non-dusting
• Can be used in underground applications above the water table
• Seal before back filling
• Unslit tubing can be slit lengthwise and fit over existing pipes
• <7% linear shrinkage dimensional stability
• <0.01 perm" water vapor permeability
  
  

  Aeroflex AC5834SSPT

K-Flex Pipe Insulation
5/8" X 3/4" X6'

K-Flex J3-2

K-Flex J1-32 Pipe Insulation 5/8" x 3/8" x 6' Split Flexible closed-cell and light weight EPDM based elastomeric K-Flex Insul-Tube is a flexible, closed-cell elastomeric tube insulation product used to conserve energy and prevent condensation on piping applications. The product's closed-cell structure creates exceptional thermal properties (k-value of 0.245 at 75 deg F and wvt of 0.03 perm-in) that protect against moisture penetration in applications within a -297 to 220 deg F temperature range. K-Flex Insul-Tube is widely used for its cold weather flexibility, durable skin surface, exacting manufacturing tolerances and lasting performance.

• Insulated tube pipe insulation is an elastomeric material that helps retard heat loss, prevents condensation and provides effective moisture vapor resistance
• Environmentally friendly, CFC free, mould and mildew resistant, fiber free and non-dusting
• Can be used in underground applications above the water table
• Seal before back filling
• Unslit tubing can be slit lengthwise and fit over existing pipes
• <7% linear shrinkage dimensional stability
• <0.01 perm" water vapor permeability,
  ,
  
  

K-Flex J1-2 Pipe Insulation 5/8" x 3/8" x 6' K-Flex Insul-Tube is a flexible, closed-cell elastomeric tube insulation product used to conserve energy and prevent condensation on piping applications. The product's closed-cell structure creates exceptional thermal properties (k-value of 0.245 at 75 deg F and wvt of 0.03 perm-in) that protect against moisture penetration in applications within a -297 to 220 deg F temperature range. K-Flex Insul-Tube is widely used for its cold weather flexibility, durable skin surface, exacting manufacturing tolerances and lasting performance.

• Insulated tube pipe insulation is an elastomeric material that helps retard heat loss, prevents condensation and provides effective moisture vapor resistance
• Environmentally friendly, CFC free, mould and mildew resistant, fiber free and non-dusting
• Can be used in underground applications above the water table
• Seal before back filling
• Unslit tubing can be slit lengthwise and fit over existing pipes
• <7% linear shrinkage dimensional stability
• <0.01 perm" water vapor permeability
  
  
  

  K-Flex J1-2

K-Flex 6Rx148078 Pipe Insulation 7/8" x 1-1/2" x 6' Black Un-Split K-Flex Insul tube is a flexible, closed cell elastomeric tube insulation product used to conserve energy and prevent condensation on piping applications. The product's closed cell structure creates exceptional thermal properties (k-value of 0.245 at 75 deg F and wvt of 0.03 perm-in) that protect against moisture penetration in applications within a -297 to 220 deg F temperature range. K-Flex Insul tube is widely used for its cold weather flexibility, durable skin surface, exacting manufacturing tolerances and lasting performance.

• Insulated tube pipe insulation is an elastomeric material that helps retard heat loss, prevents condensation and provides effective moisture vapor resistance
• Environmentally friendly, CFC free, mould and mildew resistant, fiber free and non-dusting
• Can be used in underground applications above the water table
• Seal before back filling
• Unslit tubing can be slit lengthwise and fit over existing pipes

,
,

K-Flex 6RX148078

K-Flex Pipe Insulation
7/8" X 1/2" X 6' Black

Split

K-Flex J2-4

K-Flex Pipe Insulation
7/8" X 1/2" X 6' Black

Split

K-Flex J2-34