Armacell BST05812 Pipe Insulation with Lap Seal 5/8" x 1/2" x 6' Microban Antimicrobial, Closed-Cell Foam Polyethylene foam pipe insulation. Its closed cell structure won't wick moisture and helps prevent the absorption of condensation that could cause mold to develop over time. Imcoa SS has an easy to install self seal closure system. Imcoa pipe insulation is semi-slit, and can be completely slit by hand. Imcoa SS is pre-slit with a factory applied pressure sensitive adhesive (PSA) to both seam surfaces and has a release liner for easy installation. All butt joints should be properly sealed. Imcoa and Imcoa SS are easy to cut with a knife and can be fabricated to go around p-traps and fittings.

• CFC/HCFC free
• Non-porous
• Low VOCs
• Halogen free
• Fiber free
• Resistant to mold growth

,
,

BST05812

BST05812

K-Flex 801LRE100258 K-Flex Black Long Radius 90 Degree Elbow Cover 2-5/8" x 1" K-Flex K-Fit Black NBR/PVC Cell and Flexible Elastomeric K-Fit fittings are factory-fabricated fittings made from NBR/PVC-based closed cell, flexible elastomeric foam insulation. They are produced under controlled conditions using an automated process to ensure uniformity, good fit and water-tight seams. They are environmentally friendly as they are free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and fibers. An EPA registered antimicrobial agent is incorporated into the product providing additional protection against mold, fun Gallon and bacterial growth. They are UL GREENGUARD Gold Certified for low VOC emissions. The products are made in K-Flex USA's ISO 9001:2008-certified manufacturing facility in North Carolina.,

K-Flex 801LRE100258

K-Flex 801P068058 K-Flex P-Trap 5/8" x 3/4" K-Fit P-Traps are specially designed to insulate piping systems that are comprised of a tailpiece, curved trap piece and a drain elbow. The factory-made fittings deliver easy installation, a compression fit and reliable performance. K-Fit P-Traps are made from closed cell elastomeric insulation for excellent moisture resistance and thermal properties. All K-Fit P-Traps are fabricated in a factory setting, eliminating the risk of environmental factors affecting the performance of the product.

Quicker installation (no time wasted fabricated fittings on-site)
• Reduced labor costs
• Uniformity (standardized and manufactured in a controlled environment free of conditional factors that could alter quality)
• Great fit
• Water-tight seams
  
  

  801P068058

K-Flex 801LRE068138 K-Flex Black Long Radius 90 Degree Elbow Cover 1-3/8" x 3/4" K-Flex K-Fit Black NBR/PVC Cell and Flexible Elastomeric K-Fit fittings are factory-fabricated fittings made from NBR/PVC-based closed cell, flexible elastomeric foam insulation. They are produced under controlled conditions using an automated process to ensure uniformity, good fit and water-tight seams. They are environmentally friendly as they are free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and fibers. An EPA registered antimicrobial agent is incorporated into the product providing additional protection against mold, fun Gallon and bacterial growth. They are UL GREENGUARD Gold Certified for low VOC emissions. The products are made in K-Flex USA's ISO 9001:2008-certified manufacturing facility in North Carolina.,
,

801LRE068138

Insultube AC34112 Pipe Insulation Black

The original, Fiber-Free, Flexible Elastomeric Pipe Insulation For Reliable Protection Against Condensation, Mold and Energy Loss. AP Armaflex is the Ideal Insulation Material For Hvac & Refrigeration Systems In Environments Where The Highest Levels Of Condensation Control and Indoor Air Quality Are Required.

Fiber-Free, Formaldehyde-Free, Low Voc and Non-Particulating Formulation

Protects Indoor Air Quality

Closed-Cell Structure Provides Excellent Condensation Control

Built-In Vapor Retardant Barrier Eliminates Need For Additional Vapor Retarder

Microban Antimicrobial Product Protection Provides Exceptional Mold Resistance

25/50 Rated For Use In Air Plenums Up To 2" Wall

Aeroflex is a flexible, closed-cell elastomeric tube insulation product used to conserve energy and prevent condensation on piping applications. The product's closed-cell structure creates exceptional thermal properties (k-value of 0.245 at 75 deg F and wvt of 0.03 perm-in) that protect against moisture penetration in applications within a -297 to 220 deg F temperature range. K-Flex Insul-Tube is widely used for its cold weather flexibility, durable skin surface, exacting manufacturing tolerances and lasting performance.

• Insulated tube pipe insulation is an elastomeric material that helps retard heat loss, prevents condensation and provides effective moisture vapor resistance
• Environmentally friendly, CFC free, mould and mildew resistant, fiber free and non-dusting
• Can be used in underground applications above the water table
• Seal before back filling
• Unslit tubing can be slit lengthwise and fit over existing pipes
• <7% linear shrinkage dimensional stability
• <0.01 perm" water vapor permeability
  
  
  

  J3-31

  
  

  J3-31

Bramec Corporation and is a major distributor in the Electrical, Plumbing, Hardware and HVAC/R industry

Bramec 18482 Yellow Gas Line Thread Seal Tape 1/2" W x 260" L 4 Mil PTFE





18482




18482

Bramec Corporation and is a major distributor in the Electrical, Plumbing, Hardware and HVAC/R industry

Bramec 19629

K-Flex 801LRE068218 K-Flex Black Long Radius 90 Degree Elbow Cover 2-1/8" x 3/4" K-Flex K-Fit Black NBR/PVC Cell and Flexible Elastomeric K-Fit fittings are factory-fabricated fittings made from NBR/PVC-based closed cell, flexible elastomeric foam insulation. They are produced under controlled conditions using an automated process to ensure uniformity, good fit and water-tight seams. They are environmentally friendly as they are free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and fibers. An EPA registered antimicrobial agent is incorporated into the product providing additional protection against mold, fun Gallon and bacterial growth. They are UL GREENGUARD Gold Certified for low VOC emissions. The products are made in K-Flex USA's ISO 9001:2008-certified manufacturing facility in North Carolina.,

K-Flex 801LRE068218

K-Flex 801LRE100048 K-Flex Black Long Radius 90 Degree Elbow Cover 1/2" x 1" K-Flex K-Fit Black NBR/PVC Cell and Flexible Elastomeric K-Fit fittings are factory-fabricated fittings made from NBR/PVC-based closed cell, flexible elastomeric foam insulation. They are produced under controlled conditions using an automated process to ensure uniformity, good fit and water-tight seams. They are environmentally friendly as they are free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and fibers. An EPA registered antimicrobial agent is incorporated into the product providing additional protection against mold, fun Gallon and bacterial growth. They are UL GREENGUARD Gold Certified for low VOC emissions. The products are made in K-Flex USA's ISO 9001:2008-certified manufacturing facility in North Carolina.,
,

K-Flex 801LRE100048