K-Flex 801LRE068138 K-Flex Black Long Radius 90 Degree Elbow Cover 1-3/8" x 3/4" K-Flex K-Fit Black NBR/PVC Cell and Flexible Elastomeric K-Fit fittings are factory-fabricated fittings made from NBR/PVC-based closed cell, flexible elastomeric foam insulation. They are produced under controlled conditions using an automated process to ensure uniformity, good fit and water-tight seams. They are environmentally friendly as they are free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and fibers. An EPA registered antimicrobial agent is incorporated into the product providing additional protection against mold, funGallon and bacterial growth. They are UL GREENGUARD Gold Certified for low VOC emissions. The products are made in K-Flex USA's ISO 9001:2008-certified manufacturing facility in North Carolina.,
,

K-Flex 801LRE068138

The original, Fiber-Free, Flexible Elastomeric Pipe Insulation For Reliable Protection Against Condensation, Mold and Energy Loss. AP Armaflex is the Ideal Insulation Material For Hvac & Refrigeration Systems In Environments Where The Highest Levels Of Condensation Control and Indoor Air Quality Are Required.

Fiber-Free, Formaldehyde-Free, Low Voc and Non-Particulating Formulation

Protects Indoor Air Quality

Closed-Cell Structure Provides Excellent Condensation Control

Built-In Vapor Retardant Barrier Eliminates Need For Additional Vapor Retarder

Microban Antimicrobial Product Protection Provides Exceptional Mold Resistance

25/50 Rated For Use In Air Plenums Up To 2" Wall

White Rodgers Cooling Controls EK162S

The original, Fiber-Free, Flexible Elastomeric Pipe Insulation For Reliable Protection Against Condensation, Mold and Energy Loss. AP Armaflex is the Ideal Insulation Material For Hvac & Refrigeration Systems In Environments Where The Highest Levels Of Condensation Control and Indoor Air Quality Are Required.

Fiber-Free, Formaldehyde-Free, Low Voc and Non-Particulating Formulation

Protects Indoor Air Quality

Closed-Cell Structure Provides Excellent Condensation Control

Built-In Vapor Retardant Barrier Eliminates Need For Additional Vapor Retarder

Microban Antimicrobial Product Protection Provides Exceptional Mold Resistance

25/50 Rated For Use In Air Plenums Up To 2" Wall

Armacell APT15815

The original, Fiber-Free, Flexible Elastomeric Pipe Insulation For Reliable Protection Against Condensation, Mold and Energy Loss. AP Armaflex is the Ideal Insulation Material For Hvac & Refrigeration Systems In Environments Where The Highest Levels Of Condensation Control and Indoor Air Quality Are Required.

Fiber-Free, Formaldehyde-Free, Low Voc and Non-Particulating Formulation

Protects Indoor Air Quality

Closed-Cell Structure Provides Excellent Condensation Control

Built-In Vapor Retardant Barrier Eliminates Need For Additional Vapor Retarder

Microban Antimicrobial Product Protection Provides Exceptional Mold Resistance

25/50 Rated For Use In Air Plenums Up To 2" Wall

White Rodgers Cooling Controls D14-3

Aeroflex is a flexible, closed-cell elastomeric tube insulation product used to conserve energy and prevent condensation on piping applications. The product's closed-cell structure creates exceptional thermal properties (k-value of 0.245 at 75 de F and wvt of 0.03 perm-in) that protect against moisture penetration in applications within a -297 to 220 deg F temperature range. K-Flex Insul-Tube is widely used for its cold weather flexibility, durable skin surface, exacting manufacturing tolerances and lasting performance.

Insulated tube pipe insulation is an elastomeric material that helps retard heat loss, prevents condensation and provides effective moisture vapor resistance

• Environmentally friendly, CFC free, mold and mildew resistant, fiber free and non-dusting
• Can be used in underground applications above the water table
• Seal before back filling
• Unslit tubing can be slit lengthwise and fit over existing pipes
• <7% linear shrinkage dimensional stability
• <0.01 perm" water vapor permeability

Aeroflex J3-31

Bramec Corporation and is a major distributor in the Electrical, Plumbing, Hardware and HVAC/R industry

Bramec 19629

K-Flex 6RX148068 Pipe Insulation 3/4" x 1-1/2" x 6' Black Un-Split K-Flex Insul tube is a flexible, closed cell elastomeric tube insulation product used to conserve energy and prevent condensation on piping applications. The product's closed cell structure creates exceptional thermal properties (k-value of 0.245 at 75 deg F and wvt of 0.03 perm-in) that protect against moisture penetration in applications within a -297 to 220 deg F temperature range. K-Flex Insul tube is widely used for its cold weather flexibility, durable skin surface, exacting manufacturing tolerances and lasting performance.

Insulated tube pipe insulation is an elastomeric material that helps retard heat loss, prevents condensation and provides effective moisture vapor resistance
• Environmentally friendly, CFC free, mould and mildew resistant, fiber free and non-dusting
• Can be used in underground applications above the water table
• Seal before back filling
• Unslit tubing can be slit lengthwise and fit over existing pipes
  
  

  K-Flex 6RX148068

K-Flex 801LRE068118 K-Flex Black Long Radius 90 Degree Elbow Cover 1-1/8" x 3/4"

K-Flex 801LRE068118

K-Flex 801LRE068058 K-Flex Black Long Radius 90 Degree Elbow Cover 5/8" x 3/4"

K-Flex 801LRE068058

K-Flex 801P100118 K-Flex P-Trap 1-1/8" x 1" K-Fit P-Traps are specially designed to insulate piping systems that are comprised of a tailpiece, curved trap piece and a drain elbow. The factory-made fittings deliver easy installation, a compression fit and reliable performance. K-Fit P-Traps are made from closed cell elastomeric insulation for excellent moisture resistance and thermal properties. All K-Fit P-Traps are fabricated in a factory setting, eliminating the risk of environmental factors affecting the performance of the product.

Quicker installation (no time wasted fabricated fittings on-site)
• Reduced labor costs
• Uniformity (standardized and manufactured in a controlled environment free of conditional factors that could alter quality)
• Great fit
• Water-tight seams
  
  

  K-Flex 801P100118

K-Flex 801LRE100158 K-Flex Black Long Radius 90 Degree Elbow Cover 1-5/8" x 1" K-Flex K-Fit Black NBR/PVC Cell and Flexible Elastomeric K-Fit fittings are factory-fabricated fittings made from NBR/PVC-based closed cell, flexible elastomeric foam insulation. They are produced under controlled conditions using an automated process to ensure uniformity, good fit and water-tight seams. They are environmentally friendly as they are free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and fibers. An EPA registered antimicrobial agent is incorporated into the product providing additional protection against mold, funGallon and bacterial growth. They are UL GREENGUARD Gold Certified for low VOC emissions. The products are made in K-Flex USA's ISO 9001:2008-certified manufacturing facility in North Carolina.,

K-Flex 801LRE100158

K-Flex 801LRE148078 K-Flex Black Long Radius 90 Degree Elbow Cover 7/8" x 1-1/2" K-Flex K-Fit Black NBR/PVC Cell and Flexible Elastomeric K-Fit fittings are factory-fabricated fittings made from NBR/PVC-based closed cell, flexible elastomeric foam insulation. They are produced under controlled conditions using an automated process to ensure uniformity, good fit and water-tight seams. They are environmentally friendly as they are free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and fibers. An EPA registered antimicrobial agent is incorporated into the product providing additional protection against mold, funGallon and bacterial growth. They are UL GREENGUARD Gold Certified for low VOC emissions. The products are made in K-Flex USA's ISO 9001:2008-certified manufacturing facility in North Carolina.,
,

K-Flex 801LRE148078