Home  > NIDEC MOTOR CORPORATION(x)
|◀ 121 - 132 of 212 ▶|
View:
US Motors Rescue EC5472FP 1-Speed 1-PH ECM Fan Assembly, 115 - 230 VAC, 1550-1725 RPM
  • Automatic thermal overload protection
  • IP67 capable of being submerged in water up to 30 min
  • Dual voltage - no connection change required
Sid Harvey Item #:EC5472FP: Replaces Part #:'s : 5SME58AAF1031,
,


US Motors EC5472FP

Item#:
EC5472FP
Manufacturer Item:
M035TAY0116013B
Manufacturer:
NIDEC MOTOR CORPORATION
US Motors D5P2D 1-Speed 3-PH Rolled Steel Polyphase Premium Efficiency Motor, 5-HP, 1800 RPM
Sid Harvey Item #:D5P2D: Replaces Part #:'s : FH82,
,

Item#:
D5P2D
Manufacturer Item:
D5P2D
Manufacturer:
NIDEC MOTOR CORPORATION
US Motors D32P2D Fan Motor 7-1/2 HP 1800 RPM 230/460 VAC

Item#:
D32P2D
Manufacturer Item:
D32P2D
Manufacturer:
NIDEC MOTOR CORPORATION
US Motors D34P2AH 3-PH Rolled Steel Motor, 3/4 HP, 208 - 230/460 VAC, 1725 RPM
  • WorldMotor features, except where noted and on 200 volt and 575 volt motors
  • Class F insulation, class B rise at service factor
  • Rolled steel frame 56-320, cast iron frame 360-440
  • 56-250 aluminum end shields, 280-440 cast iron end shields
  • CE mark on nameplate
  • 40 deg C ambient, NEMA design B performance
  • Regreasable bearings 180 frame and up
  • Double shielded ball bearings 140-400, open on 440
  • Bearing caps on 400 and 440 frames
  • F1 assembly Position except where noted
  • Lifting provisions 180 frame and up
  • Conversion kits drip cover kits (140 - 320 frame)
,
,

Item#:
D34P2AH
Manufacturer Item:
P063AHC1315015B
Manufacturer:
NIDEC MOTOR CORPORATION
US Motors D7P2D 1-Speed 3-PH Motor, 7-1/2 HP, 208 - 230/460 volt, 1800 RPM
  • NEMA Premium Efficient IE3
  • CE mark on nameplate
  • Regreasable bearings 180 frame and up
  • Double shielded bearings 140-400, open on 440
  • Bearing caps on 400 and 440 frames
  • F1 assembly Position except where noted
  • Lifting provisions 180 frame and up
Sid Harvey Item #:D7P2D: Replaces Part #:'s : R341,
,

Item#:
D7P2D
Manufacturer Item:
D7P2D
Manufacturer:
NIDEC MOTOR CORPORATION
US Motors 4115 1-Speed Split Phase Fan and Blower Motor, 3/4 HP, 115/230 volt, 1725 RPM
  • Class B insulation unless otherwise noted
  • With threaded conduit hole
  • Automatic reset thermal overload protection
,
,

Item#:
4115
Manufacturer Item:
4115
Manufacturer:
NIDEC MOTOR CORPORATION
Model Number:K055RJJ2167011B
  • PRODUCT NAME:.5 HP - ODP - 1625
  • PHASETYPE:1 PERMANENT SPLIT CAPACITOR
  • MOTOR ENCLOSURE:ODP
  • HORSEPOWER:.5
  • KILOWATTS:0.4
  • POLES:4
  • NUMBER SPEEDS:3
  • RPM:1625
  • HERTZ:60
  • VOLTS PRIMARY:208-230 VAC
  • FRAME :48
  • SHAFT CODE:Y
  • STATOR DIAMETER:5.5
  • STACK:2.25
  • MOUNTING:HUB/STUD
  • MOTOR TYPE:FHP
  • OPPOSITE END BEARING:BALL
  • SHAFT END BEARING:BALL
  • AMBIENT:40
  • ROTATION:CCW LEAD END
  • SERVICE FACTOR:1
  • RUN CAP MFD:5
  • RUN CAP VOLTS:370
  • SHIPPING WEIGHT:17
  • THERMAL PROTECTION:AUTOMATIC RESET
  • BREAKDOWN TORQUE:58.02
  • BREAKDOWN TORQUE UOM:OZFT
  • LOCKED ROTOR TORQUE:9.089
  • LOCKED ROTOR TORQUE UOM:OZFT
  • INSULATION CLASS:B
  • LOCKED ROTOR AMPS:10.82
  • FULL LOAD AMPS PRIMARY:4.3
  • SERVICE FACTOR AMPS PRIMARY:4.3

  • Item#:
    NA1054
    Manufacturer Item:
    NA1054
    Manufacturer:
    NIDEC MOTOR CORPORATION
    Model Number:K055RHF2141011B
  • PRODUCT NAME:.167 HP - ODP - 1075
  • PHASE TYPE:1 PERMANENT SPLIT CAPACITOR
  • MOTOR ENCLOSURE:ODP
  • HORSEPOWER:.167
  • KILOWATTS:0.1
  • POLES:6
  • NUMBER SPEEDS: 3
  • RPM:1075
  • HERTZ:60
  • VOLTS PRIMARY:115 VAC
  • FRAME :48
  • SHAFT CODE:Y
  • STATOR DIAMETER:5.5
  • STACK:1
  • MOTOR TYPE:FHP
  • OPPOSITE END BEARING:SELF-ALIGN
  • SHAFT END BEARING:SELF-ALIGN
  • AMBIENT:40
  • ROTATION:CCW LEAD END
  • SERVICE FACTOR: 1
  • RUN CAP MFD:5
  • RUN CAP VOLTS:370
  • SHIPPING WEIGHT:10
  • THERMAL PROTECTION:AUTOMATIC RESET
  • BREAKDOWN TORQUE:21.67
  • LOCKED ROTOR TORQUE:5.387
  • LOCKED ROTOR TORQUE UOM:OZFT
  • INSULATION CLASS:B
  • LOCKED ROTOR AMPS:5.61
  • FULL LOAD AMPS PRIMARY:2.8
  • SERVICE FACTOR AMPS PRIMARY:2.8

  • Item#:
    NAL1024
    Manufacturer Item:
    NAL1024
    Manufacturer:
    NIDEC MOTOR CORPORATION
    Model Number:K055RJH2166011B
  • PRODUCT NAME:.25 HP - ODP - 1075
  • PHASETYPE:1_PERMANENT SPLIT CAPACITOR
  • MOTOR ENCLOSURE:ODP
  • HORSEPOWER:.25
  • KILOWATTS:0.2
  • POLES:6
  • NUMBER SPEEDS:3
  • RPM:1075
  • HERTZ:60
  • VOLTS PRIMARY:115 VAC
  • FRAME :48
  • SHAFT CODE:Y
  • STATOR DIAMETER:5.5
  • STACK:1.5
  • MOUNTING:HUB/STUD
  • MOTOR TYPE:FHP
  • OPPOSITE END BEARING:BALL
  • SHAFT END BEARING:BALL
  • AMBIENT:40
  • ROTATION:CCW LEAD END
  • SERVICE FACTOR: 1
  • RUN CAP MFD:5
  • RUN CAP VOLTS:370
  • SHIPPING WEIGHT:11
  • THERMAL PROTECTION:AUTOMATIC RESET
  • BREAKDOWN TORQUE:35.83
  • BREAKDOWN TORQUE UOM:OZFT
  • LOCKED ROTOR TORQUE:6.451
  • LOCKED ROTOR TORQUE UOM:OZFT
  • INSULATION CLASS:B
  • LOCKED ROTOR AMPS:9.29
  • FULL LOAD AMPS PRIMARY:4.3
  • SERVICE FACTOR AMPS PRIMARY:4.3

  • Item#:
    NAL1026
    Manufacturer Item:
    NAL1026
    Manufacturer:
    NIDEC MOTOR CORPORATION
    Model Number:K055RKV2201011B
  • PRODUCT NAME:.25 HP - ODP - 1075
  • PHASE TYPE: PERMANENT SPLIT CAPACITOR
  • MOTOR ENCLOSURE:ODP
  • HORSEPOWER:.25
  • KILOWATTS:0.2
  • POLES:6
  • NUMBER SPEEDS:3
  • RPM:1075
  • HERTZ:60
  • VOLTS PRIMARY:208-230 VAC
  • FRAME :48
  • SHAFT CODE:Y
  • STATOR DIAMETER:5.5
  • STACK:1.25
  • MOTOR TYPE:FHP
  • OPPOSITE END BEARING:SELF-ALIGN
  • SHAFT END BEARING:SELF-ALIGN
  • AMBIENT:40
  • ROTATION:CCW LEAD END
  • SERVICE FACTOR:1
  • RUN CAP MFD:5
  • RUN CAP VOLTS:370
  • SHIPPING WEIGHT:11
  • THERMAL PROTECTION AUTOMATIC RESET
  • BREAKDOWN TORQUE:34.25
  • BREAKDOWN TORQUE UOM:OZFT
  • LOCKED ROTOR TORQUE:8.468
  • LOCKED ROTOR TORQUE UOM:OZFT
  • INSULATION CLASS:B
  • LOCKED ROTOR AMPS:4.1
  • FULL LOAD AMPS PRIMARY:1.9
  • SERVICE FACTOR AMPS PRIMARY:1.9

  • Item#:
    NA1026
    Manufacturer Item:
    NA1026
    Manufacturer:
    NIDEC MOTOR CORPORATION
    Model Number:K055RHF2141011B PRODUCT NAME:.167 HP - ODP - 1075
    PHASE TYPE: PERMANENT SPLIT CAPACITOR
    MOTOR ENCLOSURE:ODP
    HORSEPOWER:.167
    KILOWATTS:0.1
    POLES:6
    NUMBER SPEEDS: 3
    RPM:1075
    HERTZ:60
    VOLTS PRIMARY:115 VAC
    FRME :48
    SHAFT CODE:Y
    STATOR DIAMETER:5.5
    STACK:1
    MOTOR TYPE:FHP
    OPPOSITE END BEARING:SELF-ALIGN
    SHAFT END BEARING:SELF-ALIGN
    AMBIENT:40
    ROTATION:CCW LEAD END
    SERVICE FACTOR: 1
    RUN CAP MFD:5
    RUN CAP VOLTS:370
    SHIPPING WEIGHT:10
    THERMAL PROTECTION:AUTOMATIC RESET
    BREAKDOWN TORQUE:21.67
    BREAKDOWN TORQUE UOM:OZFT
    LOCKED ROTOR TORQUE:5.387
    LOCKED ROTOR TORQUE UOM:OZFT
    INSULATION CLASS:B
    LOCKED ROTOR AMPS:5.61
    FULL LOAD AMPS PRIMARY:2.8
    SERVICE FACTOR AMPS PRIMARY:2.8

    Item#:
    NAL1016
    Manufacturer Item:
    NAL1016
    Manufacturer:
    NIDEC MOTOR CORPORATION
    Model Number: K055RLL2217011B
  • PRODUCT NAME: .167 HP - ODP - 1075
  • PHASE TYPE: 1 PERMANENT SPLIT CAPACITOR
  • MOTOR ENCLOSURE: ODP
  • HORSEPOWER:.167
  • KILOWATTS: 0.1
  • POLES:6
  • NUMBER SPEEDS: 3
  • RPM: 1075
  • HERTZ:60
  • VOLTS PRIMARY: 208-230 V
  • VOLTS :208/230
  • FRAME :48
  • STACK:1
  • MOTOR TYPE: FHP
  • OPPOSITE END BEARING: SELF-ALIGN
  • SHAFT END BEARING: SELF-ALIGN
  • AMBIENT: 40
  • ROTATION: CCW LEAD END
  • RUN CAP MFD: 5
  • RUN CAP VOLTS: 370
  • SHIPPING WEIGHT: 9
  • THERMAL PROTECTION: AUTOMATIC RESET
  • BREAKDOWN TORQUE:20.17
  • BREAKDOWN TORQUE UOM: OZFT
  • LOCKED ROTOR TORQUE: 4.852
  • LOCKED ROTOR TORQUE UOM:OZFT
  • INSULATION CLASS: B
  • LOCKED ROTOR AMPS:2.47
  • FULL LOAD AMPS PRIMARY: 1

  • Item#:
    NA1016
    Manufacturer Item:
    NA1016
    Manufacturer:
    NIDEC MOTOR CORPORATION
    |◀ 121 - 132 of 212 ▶|
    View: