Home  > EWC CONTROLS INC(x)
View:
Round Damper 18"

EWC CLBD-8

Item#:
18URD
Manufacturer Item:
18URD
Manufacturer:
EWC CONTROLS INC
The ND Damper is constructed using Heavy Duty 0.80 extruded aluminum.
  • Nylon Bearings for quiet operation.
  • Overlapping parallel blade design insures low leakage.
  • Designed to operate at static pressures up to 1.5 w.c.
  • The UL Listed Motor Actuator is a 24 vac 3 wire power open/ power close type.
  • The motor actuator is rated at 18lbs. of torque. Superior to low torque Spring type motors.
  • The Motor Actuator housing has a NEMA1 Rating.
  • Integrated End-Stop Adjustment allows for a percentage of Relief Air (Leakage) to be set when the damper is powered to closed and/or you may set a maximum open position as well.
  • Bright green and red LEDs Indicate damper open and closed position.



    EWC Controls ND-10X16

  • Item#:
    ND10X20
    Manufacturer Item:
    ND10X20
    Manufacturer:
    EWC CONTROLS INC
    EWC CLBD-14 Bypass Damper 14"

    EWC CLBD-12

    Item#:
    CLBD-14
    Manufacturer Item:
    CLBD-14
    Manufacturer:
    EWC CONTROLS INC
    EWC CLBD-10 Bypass Damper 10"

    Elgen GH1014

    Item#:
    CLBD-10
    Manufacturer Item:
    CLBD-10
    Manufacturer:
    EWC CONTROLS INC
    EWC CLBD-12 Bypass Damper 12"

    EWC CLBD-10

    Item#:
    CLBD-12
    Manufacturer Item:
    CLBD-12
    Manufacturer:
    EWC CONTROLS INC
    EWC CLBD-8 Bypass Damper 8"

    EWC CLBD-14

    Item#:
    CLBD-8
    Manufacturer Item:
    8 CLBD
    Manufacturer:
    EWC CONTROLS INC
    EWC Controls MRK Motor Replacement Kit for Damper 24 VAC,
    ,



    Century Motors A4-11

    Item#:
    MRK
    Manufacturer Item:
    MRK
    Manufacturer:
    EWC CONTROLS INC
    EWC Controls NCM 300 panel provides intelligent control of Heat Pump or Conventional forced air zoning systems at a maximum of three zones using motorized dampers and practically any off-the-shelf heat/cool thermostat. With features like automatic changeover, opposite system service, short cycle timers and supply air sensing capability, the NCM 300 provides a high level of performance in a non-expandable zone control panel.
    • 2 - 3 zones, non-expandable
    • Compatible equipment - gas/electric/hydro up to 2 stages heating and 1 stage cooling and heat pump conventional up to 2 stages heating and 1 stage cooling
    • Compatible thermostat: Any single stage heat/cool thermostat or 2 stage heat, 1 stage cool heat pump thermostat
    • Compatible damper - EWC models URD, ND, RSD and SID, any 24 VAC 3-wire or 2-wire damper
    • Staging via adjustable on-board timer (7 - 42 min)
    • Enhanced hydro-air capabilities, can delay fan activation on Heating demand
    • Supply air temperature monitoring to help protect HVAC equipment
    • Adjustable purge time (90 or 120 sec)
    • On board LED's indicate system operation
    • Supply Air Sensor
    ,

    ,



    EWC Controls BMPLUS5000

    Item#:
    NCM300
    Manufacturer Item:
    NCM-300
    Manufacturer:
    EWC CONTROLS INC
  • 2 or 3 zone compatible
  • Single Stage, Two Stage Heat and Heat Pump compatible
  • LCD displays system status
  • A2L refrigerant Safety Interlock
  • Built-in Fresh Air feature
  • 24v output terminal to power additional accessories
  • Easy 4 button LCD programming
  • Data output terminal to eliminate use of a By-pass
  • Adjustable Purge Delay
  • Short Cycling Protection
  • Supply Air Limit Delay
  • Hydro-Air compatible

    EWC CONTROLS INC NCM300L

  • Item#:
    NCM-3Z
    Manufacturer Item:
    NCM-3Z
    Manufacturer:
    EWC CONTROLS INC
    Item#:
    NCM300L
    The ND Damper is constructed using Heavy Duty 0.80 extruded aluminum.
  • Nylon Bearings for quiet operation.
  • Overlapping parallel blade design insures low leakage.
  • Designed to operate at static pressures up to 1.5 w.c.
  • The UL Listed Motor Actuator is a 24 vac 3 wire power open/ power close type.
  • The motor actuator is rated at 18lbs. of torque. Superior to low torque Spring type motors.
  • The Motor Actuator housing has a NEMA1 Rating.
  • Integrated End-Stop Adjustment allows for a percentage of Relief Air (Leakage) to be set when the damper is powered to closed and/or you may set a maximum open position as well.
  • Bright green and red LEDs Indicate damper open and closed position.



    EWC Controls ND-20X12

  • Item#:
    ND-20X8
    Manufacturer:
    EWC CONTROLS INC
    The ND Damper is constructed using Heavy Duty 0.80 extruded aluminum.
  • Nylon Bearings for quiet operation.
  • Overlapping parallel blade design insures low leakage.
  • Designed to operate at static pressures up to 1.5 w.c.
  • The UL Listed Motor Actuator is a 24 vac 3 wire power open/ power close type.
  • The motor actuator is rated at 18lbs. of torque. Superior to low torque Spring type motors.
  • The Motor Actuator housing has a NEMA1 Rating.
  • Integrated End-Stop Adjustment allows for a percentage of Relief Air (Leakage) to be set when the damper is powered to closed and/or you may set a maximum open position as well.
  • Bright green and red LEDs Indicate damper open and closed position.



    EWC Controls ND-14X8

  • Item#:
    ND-16X12
    Manufacturer Item:
    ND16X12
    Manufacturer:
    EWC CONTROLS INC
    View: