Home  > EWC CONTROLS INC(x)
|◀ ◀ 37 - 48 of 57 ▶ ▶|
View:

Zone Damper 14" x 12" Side Mount Power Open,Power Close

The ND Damper is constructed using Heavy Duty 0.80 extruded aluminum.
  • Nylon Bearings for quiet operation.
  • Overlapping parallel blade design insures low leakage.
  • Designed to operate at static pressures up to 1.5 w.c.
  • The UL Listed Motor Actuator is a 24 vac 3 wire power open/ power close type.
  • The motor actuator is rated at 18lbs. of torque. Superior to low torque Spring type motors.
  • The Motor Actuator housing has a NEMA1 Rating.
  • Integrated End-Stop Adjustment allows for a percentage of Relief Air (Leakage) to be set when the damper is powered to closed and/or you may set a maximum open position as well.
  • Bright green and red LEDs Indicate damper open and closed position.



    ND-14X12


    ND-14X12

    • Item#:
    ND-14X12
    Manufacturer Item:
    14X12 ND
    Manufacturer:
    EWC CONTROLS INC
     
    EWC Controls_Broc
    ND-ZONE-DAMPERS_SPEC

    Zone Damper 14" x 10" Side Mount Power Open,Power Close

    The ND Damper is constructed using Heavy Duty 0.80 extruded aluminum.
  • Nylon Bearings for quiet operation.
  • Overlapping parallel blade design insures low leakage.
  • Designed to operate at static pressures up to 1.5 w.c.
  • The UL Listed Motor Actuator is a 24 vac 3 wire power open/ power close type.
  • The motor actuator is rated at 18lbs. of torque. Superior to low torque Spring type motors.
  • The Motor Actuator housing has a NEMA1 Rating.
  • Integrated End-Stop Adjustment allows for a percentage of Relief Air (Leakage) to be set when the damper is powered to closed and/or you may set a maximum open position as well.
  • Bright green and red LEDs Indicate damper open and closed position.



    ND-14X10


    ND-14X10

    • Item#:
    ND-14X10
    Manufacturer Item:
    ND14X10
    Manufacturer:
    EWC CONTROLS INC
     
    EWC Controls_Broc
    ND-ZONE-DAMPERS_SPEC

    Zone Panel 2 Heat/1 Copol Convent/HP, Less Sensor

  • New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed
  • Powder coat paint system  for a long lasting professional finish
  • Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability
  • Modern cabinet aesthetics  increased curb appeal with visually appealing design
  • Louver panels  provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity
  • Optimized fan orifice  optimizes airflow and reduces unit sound
  • Rust resistant screws  confirmed through 1500-hour salt spray testing
  • 3"-4"-5" service valve space  provides a minimum working area of 27-square inches for easier access
  • 15" wide, industry leading corner service access  makes repairs easier and faster.
  • External gauge port access  allows easy connection of low-loss gauge ports
  • Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance
  • Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal
  • Service trays  hold fasteners or caps during service calls
  • QR code  provides technical information on demand for faster service calls
  • Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.

    EWC Controls NCM300L

    • Item#:
    NCM300L
    Manufacturer Item:
    NCM-300L
    Manufacturer:
    EWC CONTROLS INC
     
    NCM300L_Spec

    Zone Damper 24" x 10" >>Limited Stock Clearance Item<<

    The ND Damper is constructed using Heavy Duty 0.80 extruded aluminum.
  • Nylon Bearings for quiet operation.
  • Overlapping parallel blade design insures low leakage.
  • Designed to operate at static pressures up to 1.5 w.c.
  • The UL Listed Motor Actuator is a 24 vac 3 wire power open/ power close type.
  • The motor actuator is rated at 18Lbs.s. of torque. Superior to low torque Spring type motors.
  • The Motor Actuator housing has a NEMA1 Rating.
  • Integrated End-Stop Adjustment allows for a percentage of Relief Air (Leakage) to be set when the damper is powered to closed and/or you may set a maximum open position as well.
  • Bright green and red LEDs Indicate damper open and closed position.

    ND-24X10

    • Item#:
    ND-24X10
    Manufacturer Item:
    ND-24X10 24V
    Manufacturer:
    EWC CONTROLS INC
     
    EWC Controls_Broc
    ND-ZONE-DAMPERS_SPEC

    Zone Damper 24" x 12" Power Open,Power Close

    The ND Damper is constructed using Heavy Duty 0.80 extruded aluminum.
  • Nylon Bearings for quiet operation.
  • Overlapping parallel blade design insures low leakage.
  • Designed to operate at static pressures up to 1.5 w.c.
  • The UL Listed Motor Actuator is a 24 vac 3 wire power open/ power close type.
  • The motor actuator is rated at 18lbs. of torque. Superior to low torque Spring type motors.
  • The Motor Actuator housing has a NEMA1 Rating.
  • Integrated End-Stop Adjustment allows for a percentage of Relief Air (Leakage) to be set when the damper is powered to closed and/or you may set a maximum open position as well.
  • Bright green and red LEDs Indicate damper open and closed position.



    ND-24X12


    ND-24X12

    • Item#:
    ND-24X12
    Manufacturer Item:
    ND24X12
    Manufacturer:
    EWC CONTROLS INC
     
    EWC Controls_Broc
    ND-ZONE-DAMPERS_SPEC

    Zone Damper 24" x 8" Power Open,Power Close

    The ND Damper is constructed using Heavy Duty 0.80 extruded aluminum.
  • Nylon Bearings for quiet operation.
  • Overlapping parallel blade design insures low leakage.
  • Designed to operate at static pressures up to 1.5 w.c.
  • The UL Listed Motor Actuator is a 24 vac 3 wire power open/ power close type.
  • The motor actuator is rated at 18lbs. of torque. Superior to low torque Spring type motors.
  • The Motor Actuator housing has a NEMA1 Rating.
  • Integrated End-Stop Adjustment allows for a percentage of Relief Air (Leakage) to be set when the damper is powered to closed and/or you may set a maximum open position as well.
  • Bright green and red LEDs Indicate damper open and closed position.



    ND-24X8


    ND-24X8

    • Item#:
    ND-24X8
    Manufacturer Item:
    ND24X8
    Manufacturer:
    EWC CONTROLS INC
     
    EWC Controls_Broc
    ND-ZONE-DAMPERS_SPEC

    Zone Damper 12" x 18" Side Mount Power Open,Power Close

    The ND Damper is constructed using Heavy Duty 0.80 extruded aluminum.
  • Nylon Bearings for quiet operation.
  • Overlapping parallel blade design insures low leakage.
  • Designed to operate at static pressures up to 1.5 w.c.
  • The UL Listed Motor Actuator is a 24 vac 3 wire power open/ power close type.
  • The motor actuator is rated at 18lbs. of torque. Superior to low torque Spring type motors.
  • The Motor Actuator housing has a NEMA1 Rating.
  • Integrated End-Stop Adjustment allows for a percentage of Relief Air (Leakage) to be set when the damper is powered to closed and/or you may set a maximum open position as well.
  • Bright green and red LEDs Indicate damper open and closed position.



    ND-12X8


    ND-12X8

    • Item#:
    ND-12X8
    Manufacturer Item:
    ND12X8
    Manufacturer:
    EWC CONTROLS INC
     
    EWC Controls_Broc
    ND-ZONE-DAMPERS_SPEC

    Outdoor Air-Sensor S2000

    EWC Controls OAS Outdoor Air-Sensor S2000



    OAS


    OAS

    Item#:
    OAS
    Manufacturer Item:
    OAS
    Manufacturer:
    EWC CONTROLS INC
     
    EWC Controls_Broc

    Supply/Return Air Sensor 5-1/2" Insertion

    EWC Controls SAS Supply Air Sensor

    EWC Controls SAS

    Item#:
    SAS
    Manufacturer Item:
    SAS
    Manufacturer:
    EWC CONTROLS INC

    Smart By-Pass Damper 8" Round 24 VAC

    Description of the SBD Motor Actuator: The Smart Bypass Motor Actuator is a digital differential pressure controller with an integrated PI loop and intelligent software. The Smart Bypass Damper is the only industry bypass solution that can automatically measure, monitor and maintain the designed operating static pressure of the HVAC system in all modes of operation. The Smart Bypass Damper includes all of the accessories needed for field installation. No measuring instruments are required.



    SBD-8


    SBD-8

    Item#:
    SBD-8
    Manufacturer Item:
    8 SBD
    Manufacturer:
    EWC CONTROLS INC
     
    EWC Controls_Broc

    Smart By-Pass Damper 14" Round 24 VAC

    Description of the SBD Motor Actuator: The Smart Bypass Motor Actuator is a digital differential pressure controller with an integrated PI loop and intelligent software. The Smart Bypass Damper is the only industry bypass solution that can automatically measure, monitor and maintain the designed operating static pressure of the HVAC system in all modes of operation. The Smart Bypass Damper includes all of the accessories needed for field installation. No measuring instruments are required.



    SBD-14


    SBD-14

    Item#:
    SBD-14
    Manufacturer Item:
    SBD-14
    Manufacturer:
    EWC CONTROLS INC
     
    EWC Controls_Broc

    Smart By-Pass Damper 10" Round 24 VAC

    Description of the SBD Motor Actuator: The Smart Bypass Motor Actuator is a digital differential pressure controller with an integrated PI loop and intelligent software. The Smart Bypass Damper is the only industry bypass solution that can automatically measure, monitor and maintain the designed operating static pressure of the HVAC system in all modes of operation. The Smart Bypass Damper includes all of the accessories needed for field installation. No measuring instruments are required.

    Item#:
    SBD-10
    Manufacturer Item:
    10 SBD
    Manufacturer:
    EWC CONTROLS INC
     
    EWC Controls_Broc
    |◀ ◀ 37 - 48 of 57 ▶ ▶|
    View: