Home  > REZNOR LLC(x)
|◀ ◀ 1 - 12 of 46 ▶ ▶|
View:

Unit Heater Natural Gas Power Vented 400K 83% AFUE 120 VAC

  • Reznor Model UDX gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Model UDX heaters are approved for installation in the United States and Canada by ETL.
  • Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays).
  • Reznor model UDX unit heaters feature a two-tone black and white powder coated, scratch-resistant paint scheme. Each unit has clean rounded corners and edges with no visible screws or fasteners. Model UDX unit heaters provide the same superior performance customers have relied on for more than 100 years along with added features that make servicing the unit easier, installation safer and improve monitoring capabilities
  • Sizes 30-400 MBTUH certified for commercial/industrial heating application
  • Sizes 30-125 MBTUH carry an additional approval for use in residential garage/workshop heating applications
  • 50-60°F Rise range
  • Integrated circuit board with 7 segment display
  • External status indicating LED
  • Hinged door with ¼ turn latch
  • Improved cabinet design with removeable front face and two tone white and black powder paint.
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented single burner combustion system including a one-piece burner assembly
  • 115V, 1 phase, 60 Hz supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 10,000 ft. elevation)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas pipe connection
  • Full fan guard
  • Optional Features
    Single-stage propane gas valve (field adjustable for operation to 10,000 ft.)
  • Two-stage gas valve (sizes 60-400)
  • 409 or 316 stainless steel heat exchangers
  • Totally enclosed fan motor (sizes 30-400)
  • Vent cap
  • Thermostat
  • Integrated vertical louvers
  • Integrated 30° & 60° downturn nozzles
  • Gas conversion kits (natural and propane)
  • Primary/secondary controls for zoning up to six units
  • Ceiling suspension kit - Sizes 30-125
  • Hanger kits for 1 pipe
  • Stepdown transformer (for 208/115, 230/115 or 460/115 Supply voltage)
  • Manual shutoff valves

    Reznor UDX-400

    • Item#:
    UDX-400
    Manufacturer Item:
    UDX-400
    Manufacturer:
    REZNOR LLC
     
    UDX-REZNOR_SPEC

    Unit Heater Natural Gas Power Vented 350K 83% AFUE 120 VAC

  • Reznor Model UDX gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Model UDX heaters are approved for installation in the United States and Canada by ETL.
  • Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays).
  • Reznor model UDX unit heaters feature a two-tone black and white powder coated, scratch-resistant paint scheme. Each unit has clean rounded corners and edges with no visible screws or fasteners. Model UDX unit heaters provide the same superior performance customers have relied on for more than 100 years along with added features that make servicing the unit easier, installation safer and improve monitoring capabilities
  • Sizes 30-400 MBTUH certified for commercial/industrial heating application
  • Sizes 30-125 MBTUH carry an additional approval for use in residential garage/workshop heating applications
  • 50-60°F Rise range
  • Integrated circuit board with 7 segment display
  • External status indicating LED
  • Hinged door with ¼ turn latch
  • Improved cabinet design with removeable front face and two tone white and black powder paint.
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented single burner combustion system including a one-piece burner assembly
  • 115V, 1 phase, 60 Hz supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 10,000 ft. elevation)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas pipe connection
  • Full fan guard
  • Optional Features
    Single-stage propane gas valve (field adjustable for operation to 10,000 ft.)
  • Two-stage gas valve (sizes 60-400)
  • 409 or 316 stainless steel heat exchangers
  • Totally enclosed fan motor (sizes 30-400)
  • Vent cap
  • Thermostat
  • Integrated vertical louvers
  • Integrated 30° & 60° downturn nozzles
  • Gas conversion kits (natural and propane)
  • Primary/secondary controls for zoning up to six units
  • Ceiling suspension kit - Sizes 30-125
  • Hanger kits for 1 pipe
  • Stepdown transformer (for 208/115, 230/115 or 460/115 Supply voltage)
  • Manual shutoff valves

    Reznor UDX-350

    • Item#:
    UDX-350
    Manufacturer Item:
    UDX-350
    Manufacturer:
    REZNOR LLC
     
    UDX-REZNOR_SPEC

    Unit Heater Natural Gas Power Vented 125K 83% AFUE 120 VAC

  • Reznor Model UDX gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Model UDX heaters are approved for installation in the United States and Canada by ETL.
  • Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays).
  • Reznor model UDX unit heaters feature a two-tone black and white powder coated, scratch-resistant paint scheme. Each unit has clean rounded corners and edges with no visible screws or fasteners. Model UDX unit heaters provide the same superior performance customers have relied on for more than 100 years along with added features that make servicing the unit easier, installation safer and improve monitoring capabilities
  • Sizes 30-400 MBTUH certified for commercial/industrial heating application
  • Sizes 30-125 MBTUH carry an additional approval for use in residential garage/workshop heating applications
  • 50-60°F Rise range
  • Integrated circuit board with 7 segment display
  • External status indicating LED
  • Hinged door with ¼ turn latch
  • Improved cabinet design with removeable front face and two tone white and black powder paint.
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented single burner combustion system including a one-piece burner assembly
  • 115V, 1 phase, 60 Hz supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 10,000 ft. elevation)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas pipe connection
  • Full fan guard
  • Optional Features
    Single-stage propane gas valve (field adjustable for operation to 10,000 ft.)
  • Two-stage gas valve (sizes 60-400)
  • 409 or 316 stainless steel heat exchangers
  • Totally enclosed fan motor (sizes 30-400)
  • Vent cap
  • Thermostat
  • Integrated vertical louvers
  • Integrated 30° & 60° downturn nozzles
  • Gas conversion kits (natural and propane)
  • Primary/secondary controls for zoning up to six units
  • Ceiling suspension kit - Sizes 30-125
  • Hanger kits for 1 pipe
  • Stepdown transformer (for 208/115, 230/115 or 460/115 Supply voltage)
  • Manual shutoff valves

    Reznor UDX-125

    • Item#:
    UDX-125
    Manufacturer Item:
    UDX-125
    Manufacturer:
    REZNOR LLC
     
    UDX-REZNOR_SPEC

    Unit Heater Natural Gas Power Vented 45K 83% AFUE 120 VAC

  • Reznor Model UDX gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Model UDX heaters are approved for installation in the United States and Canada by ETL.
  • Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays).
  • Reznor model UDX unit heaters feature a two-tone black and white powder coated, scratch-resistant paint scheme. Each unit has clean rounded corners and edges with no visible screws or fasteners. Model UDX unit heaters provide the same superior performance customers have relied on for more than 100 years along with added features that make servicing the unit easier, installation safer and improve monitoring capabilities
  • Sizes 30-400 MBTUH certified for commercial/industrial heating application
  • Sizes 30-125 MBTUH carry an additional approval for use in residential garage/workshop heating applications
  • 50-60°F Rise range
  • Integrated circuit board with 7 segment display
  • External status indicating LED
  • Hinged door with ¼ turn latch
  • Improved cabinet design with removeable front face and two tone white and black powder paint.
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented single burner combustion system including a one-piece burner assembly
  • 115V, 1 phase, 60 Hz supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 10,000 ft. elevation)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas pipe connection
  • Full fan guard
  • Optional Features
    Single-stage propane gas valve (field adjustable for operation to 10,000 ft.)
  • Two-stage gas valve (sizes 60-400)
  • 409 or 316 stainless steel heat exchangers
  • Totally enclosed fan motor (sizes 30-400)
  • Vent cap
  • Thermostat
  • Integrated vertical louvers
  • Integrated 30° & 60° downturn nozzles
  • Gas conversion kits (natural and propane)
  • Primary/secondary controls for zoning up to six units
  • Ceiling suspension kit - Sizes 30-125
  • Hanger kits for 1 pipe
  • Stepdown transformer (for 208/115, 230/115 or 460/115 Supply voltage)
  • Manual shutoff valves

    Reznor UDX-45

    • Item#:
    UDX-45
    Manufacturer Item:
    UDX-45
    Manufacturer:
    REZNOR LLC
     
    UDX-REZNOR_SPEC

    Unit Heater Natural Gas Power Vented 225K BTU 120 VAC Multi-Try Direct Spark Ignition

  • Reznor V3 Series Model UDAP gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. All sizes are approved for commercial/industrial installations. Sizes 30-125 carry an additional approval for use in attached residential garage/workshop application. Model UDAP heaters are designed for 82-83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association (CSA).
  • Reznor V3 Series unit heaters have a refreshing new appearance with a glossy white cabinet finish and less visible hardware. Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays). All units have a factory installed gas line nipple to the exterior of the cabinet for easy gas service connection.
  • The preeminent new internal feature is the Tcore2 heat exchanger and single burner combustion system. Other standard features include a single-stage gas valve, multi-try direct spark ignition with timed lockout, pressure switch to verify vent flow, resiliently isolated venter motor, venter wheel with improved housing, resiliently isolated axial fan and motor assembly, and a high temperature limit control. Sizes 30-125 also include a flame rollout safety switch. Operation is controlled through an integrated circuit board. The circuit board monitors heater operation and has LED diagnostic indicator lights to identify abnormalities in control functions.
  • The V3 Series unit heaters are designed to provide all the features you expect in a Reznor heater plus improved efficiency, easier installation, and a new look ~ both inside and out. Look for the unique white unit with no visible front and bottom hardware, deep red louvers, black side handle, and angled corner to know you have a genuine Reznor heater.
  • Sizes 30-400 certified for commercial/industrial heating application
  • Sizes 30-125 carry an additional approval for use in residential garage/workshop heating applications
  • 82-83% Thermal efficient ~ TOP in its class!
  • 50-60°F Rise range
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented A single burner combustion system including a one-piece burner assembly
  • 115/1/60 Supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Integrated circuit board with diagnostic indicator lights
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 9,000 ft. elevation ƒ)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas connection
  • Full fan guard ~ engineered for safety
  • Improved cabinet design with less visible hardware
  • Single-stage, propane gas valve (field adjustable for operation to 9,000 ft. elevation B)
  • Two-stage natural gas or propane gas valve - Sizes 60-400
  • 409 or 316 Stainless steel heat exchangers
  • Totally enclosed fan motor (Sizes 30-250, 115V only)
  • Common venting with other gravity vented Category I appliance(s) (Sizes 30-100)

    Reznor UDAP-225

    • Item#:
    UDAP-225
    Manufacturer Item:
    UDAP-225
    Manufacturer:
    REZNOR LLC
     
    UDAP-Series-Parts_Misc
    UDAP-Series_Broc
    UDAP-Series_Install
    UDAP-Series_Spec

    Unit Heater Natural Gas Power Vented 30K BTU 120 VAC Multi-Try Direct Spark Ignition

  • Reznor V3 Series Model UDAP gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. All sizes are approved for commercial/industrial installations. Sizes 30-125 carry an additional approval for use in attached residential garage/workshop application. Model UDAP heaters are designed for 82-83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association (CSA).
  • Reznor V3 Series unit heaters have a refreshing new appearance with a glossy white cabinet finish and less visible hardware. Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays). All units have a factory installed gas line nipple to the exterior of the cabinet for easy gas service connection.
  • The preeminent new internal feature is the Tcore2 heat exchanger and single burner combustion system. Other standard features include a single-stage gas valve, multi-try direct spark ignition with timed lockout, pressure switch to verify vent flow, resiliently isolated venter motor, venter wheel with improved housing, resiliently isolated axial fan and motor assembly, and a high temperature limit control. Sizes 30-125 also include a flame rollout safety switch. Operation is controlled through an integrated circuit board. The circuit board monitors heater operation and has LED diagnostic indicator lights to identify abnormalities in control functions.
  • The V3 Series unit heaters are designed to provide all the features you expect in a Reznor heater plus improved efficiency, easier installation, and a new look ~ both inside and out. Look for the unique white unit with no visible front and bottom hardware, deep red louvers, black side handle, and angled corner to know you have a genuine Reznor heater.
  • Sizes 30-400 certified for commercial/industrial heating application
  • Sizes 30-125 carry an additional approval for use in residential garage/workshop heating applications
  • 82-83% Thermal efficient ~ TOP in its class!
  • 50-60°F Rise range
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented A single burner combustion system including a one-piece burner assembly
  • 115/1/60 Supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Integrated circuit board with diagnostic indicator lights
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 9,000 ft. elevation ƒ)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas connection
  • Full fan guard ~ engineered for safety
  • Improved cabinet design with less visible hardware
  • Single-stage, propane gas valve (field adjustable for operation to 9,000 ft. elevation B)
  • Two-stage natural gas or propane gas valve - Sizes 60-400
  • 409 or 316 Stainless steel heat exchangers
  • Totally enclosed fan motor (Sizes 30-250, 115V only)
  • Common venting with other gravity vented Category I appliance(s) (Sizes 30-100)

    Reznor UDAP-30

    • Item#:
    UDAP-30
    Manufacturer Item:
    UDAP-30
    Manufacturer:
    REZNOR LLC
     
    UDAP-Series-Parts_Misc
    UDAP-Series_Broc
    UDAP-Series_Install
    UDAP-Series_Spec

    Unit Heater Hydronic Steam 33K BTU

    Nortek Global(Reznor) WS23/33 Unit Heater Hydronic Steam 33K BTU,

    Reznor WS23/33

    Item#:
    WS23/33
    Manufacturer Item:
    WS23/33
    Manufacturer:
    REZNOR LLC
     
    WS-Series-Spec

    Hydronic Suspended Unit Heater 175K BTU

    Nortek WS140/175 Hydronic Suspended Unit Heater 175K BTU,

    Reznor WS140/175

    Item#:
    WS140/175
    Manufacturer Item:
    WS140/175
    Manufacturer:
    REZNOR LLC
     
    WS-Reznor_Broc
    WS-Reznor_Install

    Fan Switch 135 Degrees W/Bracket

    Reznor Parts 123974 Fan Switch, 135 Degrees W/Bracket,

    Reznor Heating Parts 123974

    Item#:
    123974
    Manufacturer Item:
    123974
    Manufacturer:
    REZNOR LLC

    Unit Heater Hydronic Steam 24K BTU 19-7/16"W x 16-7/16"H x 11-1/2"D

    Nortek Global(Reznor) WS18/24 Unit Heater Hydronic Steam 24K BTU,

    Reznor WS18/24

    Item#:
    WS18/24
    Manufacturer Item:
    WS18/24
    Manufacturer:
    REZNOR LLC
     
    WS-Series-Spec

    Pilot Assembly

    Reznor Parts RZ110861 Pilot Assembly

    Reznor Heating Parts RZ110861

    Item#:
    RZ110861
    Manufacturer Item:
    110861
    Manufacturer:
    REZNOR LLC

    Unit Heater Natural Gas Power Vented 30K BTU 83% 120 VAC


    Reznor UDXC-30

    Item#:
    UDXC-30
    Manufacturer Item:
    UDXC-30
    Manufacturer:
    REZNOR LLC
    |◀ ◀ 1 - 12 of 46 ▶ ▶|
    View: