Home  > FUJITSU(UNITARY)(x)
|◀ ◀ 1 - 12 of 19 ▶ ▶|
View:

Air Conditioning Condensing Unit Non-Communicating Composite Base 3 Ton

Fujitsu FO3617CTJCBA A/C Condensing Unit Non-Communicating No Pressure Switch 17 SEER 208/230/1 R410A 3 Ton
    New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
  • Better coat paint system  for a long lasting professional finish.
  • Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability.
  • Modern cabinet aesthetics  increased curb appeal with visually appealing design.
  • Covered louver panels  provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
  • Optimized fan orifice  optimizes airflow and reduces unit sound.
  • Rust resistant screws  confirmed through 1500-hour salt spray testing.
  • 3"-4"-5" service valve space  provides a minimum working area of 27-square"es for easier access.
  • 15" wide, industry leading corner service access makes repairs easier and faster.
  • External gauge port access  allows easy connection of low-loss gauge ports.
  • Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
  • Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal.
  • Service trays  hold fasteners or caps during service calls.
  • QR code  provides technical information on demand for faster service calls.
  • Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire

    Fujitsu FO3617CTJCBA

Item#:
FO3617CTJCBA
Manufacturer Item:
FO3617CTJCBA
Manufacturer:
FUJITSU(UNITARY)
 
FO17C-Series_Spec

Air Conditioning Condensing Unit Composite Base 2 Ton


Fujitsu FO2417CTJCBA

Item#:
FO2417CTJCBA
Manufacturer Item:
FO2417CTJCBA
Manufacturer:
FUJITSU(UNITARY)
 
FO17C-Series_Spec

Air Conditioning Condensing Unit Composite Base 1.5 Ton


Fujitsu FO1816CSJNBA

Item#:
FO1816CSJNBA
Manufacturer Item:
FO1816CSJNBA
Manufacturer:
FUJITSU(UNITARY)
 
FO16C-Series_Spec

Fujitsu Heat Pump Condensing Unit Composite Base 2 Ton 208/230/1 Non-Communicating


Fujitsu FO2415RSJNAB

Item#:
FO2415RSJNAB
Manufacturer Item:
FO2415RSJNAB
Manufacturer:
FUJITSU(UNITARY)
 
FO2415RSJNAB

Fujitsu Gas Furnace 112000 BTU AFUE 96% Multipoise Width 24.5" Non-Communicating Two Stage

  • Features
  • Up to 96% residential gas furnace CSA certified
  • 4 way multi-poise design
  • Two stages of operation to save energy and maintain optimal comfort level.
  • Diagnostics 7-Segment LED all units
  • Ignition System  DSI for reliability and longevity
  • Water Management System with patented Blocked Drain Sensor
  • Heat exchanger is removable for improved serviceability. Aluminized steel primary and stainless steel secondary construction provide maximum corrosion resistance and thermal fatigue reliability.
  • Low profile 34 inch cabinet ideal for space constrained installations.
  • Blower Shelf design  serviceable in all furnace orientations
  • Pre marked hoses  insures proper system drainage
  • Vent with 2" or 3" PVC
  • Replaceable Collector box
  • Hemmed edges on cabinet and doors
  • Quarter turn fasteners for tool less access
  • Integrated control boards feature dip switches for easy system set up
  • Self priming condensate trap
  • Solid bottom included
  • Cabinet air leakage less than 2% at 1 inch H 2O when tested in accordance with ASHRAE standard 193

    Fujitsu FF115245PT96M

    • Item#:
    FF115245PT96M
    Manufacturer Item:
    FF115245PT96M
    Manufacturer:
    FUJITSU(UNITARY)
     
    FF115245PT96M_Broc
    FF115245PT96M Product Video

    Evaporator Coil Upflow 6.5-10 Ton Dual Furnace


    Rheem RCCL-D5013S

    Item#:
    RCCL-D5013S
    Manufacturer Item:
    RCCL-D5013S
    Manufacturer:
    FUJITSU(UNITARY)
     
    RCCL-D5013S_Spec

    Air Conditioning Condensing Unit 14 SEER 5 Ton 208/230/3

    Item#:
    FO6014CSCNB
    Manufacturer Item:
    FO6014CSCNB
    Manufacturer:
    FUJITSU(UNITARY)

    Air Conditioning Condensing Unit Composite Base 20 Ton


    Fujitsu RAWL-240CAZ

    Item#:
    RAWL-240CAZ
    Manufacturer Item:
    RAWL-240CAZ
    Manufacturer:
    FUJITSU(UNITARY)
     
    RAWL-Fujitsu_Spec

    Air Conditioning Condensing Unit Composite Base 10 Ton


    Fujitsu RAWL-121CAZ

    Item#:
    RAWL-121CAZ
    Manufacturer Item:
    RAWL-121CAZ
    Manufacturer:
    FUJITSU(UNITARY)
     
    RAWL-Fujitsu_Spec

    Air Handler Commercial 10 Ton 230/460/3 R410A Optional Drive Package Horizontal/Vertical 52" W x 52" D x 27" H

  • CABINETUnit cabinet should be constructed of galvanized, pre-painted steel.
  • MOTORInherently protected motors are mounted inside of insulated cabinet to reduce motor noise. A choice of motor horsepowers and drive combinations are available to allow you to meet specified CFM at various static pressures up to 2" [.498 kPa] external static pressure.
  • LOW PROFILEAllows for horizontal installation in most standard drop ceiling applications, and the movement of units through most standard doorways for addition or replacement work.
  • THERMAL EXPANSION VALVESStandard all models.
  • FILTERSOne inch [25 mm] throwaway filters are standard, but filter racks are designed to accept either one inch [25 mm] or two inch [51 mm] filters.
  • EVAPORATOR COILTwo circuit, interlaced row split coils are constructed with copper tubes and aluminum fins mechanically bonded to the tubes for maximum heat transfer capabilities. All coil assemblies are leak tested up to 450 PSIG [3100 kPa] internal pressure prior to installation into units.
  • REFRIGERANT CONNECTIONSField piping connections are made through a fixed post between two side access panels on either side of the unit. Allows flexibility to meet most field conditions as well as full accessibility after the installation is complete. Units may be used with two straight cool condens ing units or single circuit manifolded in the field using the copper fittings shipped with each unit. The RHGN Air Handler has not been tested, rated or certified to operate with dual residential remote heat pumps.
  • DRAIN PANThe galvanized steel drain pan is designed to trap condensate in either vertical or horizontal installations. Condensate drain connections are located on both sides of the unit allowing complete flexibility to meet most field conditions.
  • SERVICE ACCESSTwo removable panels on top and each side of the unit are easily removed for access to motors, blowers, sheaves, and filters.
  • HORIZONTAL OR VERTICALAll models are designed for either application and can be installed in either position as supplied from the factory.
  • TESTINGAll units are run tested at the factory prior to shipment. Units are shipped with a holding charge of nitrogen.

    Fujitsu RHGL-120ZL

    • Item#:
    RHGL-120ZL
    Manufacturer Item:
    RHGL-120ZL
    Manufacturer:
    FUJITSU(UNITARY)
     
    RHGL-120ZL_Spec

    Air Conditioning Condensing Unit Composite Base 6-1/2 Ton


    Fujitsu RAWL-079CAZ

    Item#:
    RAWL-079CAZ
    Manufacturer Item:
    RAWL-079CAZ
    Manufacturer:
    FUJITSU(UNITARY)
     
    RAWL-Fujitsu_Spec

    Air Handler Vert/Horiz 20 Ton 208/230/3 72" L x 59-1/2" W x 34-1/2" H

  • CABINETUnit cabinet should be constructed of galvanized, pre-painted steel.
  • MOTORInherently protected motors are mounted inside of insulated cabinet to reduce motor noise. A choice of motor horsepowers and drive combinations are available to allow you to meet specified CFM at various static pressures up to 2" [.498 kPa] external static pressure.
  • LOW PROFILEAllows for horizontal installation in most standard drop ceiling applications, and the movement of units through most standard doorways for addition or replacement work.
  • THERMAL EXPANSION VALVESStandard all models.
  • FILTERSOne inch [25 mm] throwaway filters are standard, but filter racks are designed to accept either one inch [25 mm] or two inch [51 mm] filters.
  • EVAPORATOR COILTwo circuit, interlaced row split coils are constructed with copper tubes and aluminum fins mechanically bonded to the tubes for maximum heat transfer capabilities. All coil assemblies are leak tested up to 450 PSIG [3100 kPa] internal pressure prior to installation into units.
  • REFRIGERANT CONNECTIONSField piping connections are made through a fixed post between two side access panels on either side of the unit. Allows flexibility to meet most field conditions as well as full accessibility after the installation is complete. Units may be used with two straight cool condens ing units or single circuit manifolded in the field using the copper fittings shipped with each unit. The RHGN Air Handler has not been tested, rated or certified to operate with dual residential remote heat pumps.
  • DRAIN PANThe galvanized steel drain pan is designed to trap condensate in either vertical or horizontal installations. Condensate drain connections are located on both sides of the unit allowing complete flexibility to meet most field conditions.
  • SERVICE ACCESSTwo removable panels on top and each side of the unit are easily removed for access to motors, blowers, sheaves, and filters.
  • HORIZONTAL OR VERTICALAll models are designed for either application and can be installed in either position as supplied from the factory.
  • TESTINGAll units are run tested at the factory prior to shipment. Units are shipped with a holding charge of nitrogen.

    Fujitsu RHGL-240ZK

    • Item#:
    RHGL-240ZK
    Manufacturer Item:
    RHGL-240ZK
    Manufacturer:
    FUJITSU(UNITARY)
     
    RHGL-240ZK_Spec
    |◀ ◀ 1 - 12 of 19 ▶ ▶|
    View: