Features

New composite base pan  dampens sound, eliminates corrosion and reduces number of fasteners needed

Powder coat paint system  for a long lasting professional finish

The Two Stage Copeland Scroll UltraTech Compressor modulates between two capacity settings  67% and 100%  providing more precise temperature control, lower humidity and greater efficiency in comparison to single stage compressors. It uses 70% fewer moving parts which also increases efficiency and reliability.

Modern cabinet aesthetics  increased curb appeal with visually appealing design

Vertical louver panels  provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity

Optimized fan orifice  optimizes airflow and reduces unit sound

Rust resistant screws  confirmed through 1500-hour salt spray testing

Service valve has between 3"-4"-5" valve space  provides a minimum working area of 27-square inches for easier access

5" wide, industry leading corner service access  makes repairs easier and faster.

External gauge port access  allows easy connection of low-loss gauge ports

Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance

Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal

Service trays  hold fasteners or caps during service calls

QR code  provides technical information on demand for faster service calls

Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.

High and low pressure standard on all models.

Fujitsu FO3616CSJNBA

Features

New composite base pan  dampens sound, eliminates corrosion and reduces number of fasteners needed

Powder coat paint system  for a long lasting professional finish

The Two Stage Copeland Scroll UltraTech Compressor modulates between two capacity settings  67% and 100%  providing more precise temperature control, lower humidity and greater efficiency in comparison to single stage compressors. It uses 70% fewer moving parts which also increases efficiency and reliability.

Modern cabinet aesthetics  increased curb appeal with visually appealing design

Vertical louver panels  provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity

Optimized fan orifice  optimizes airflow and reduces unit sound

Rust resistant screws  confirmed through 1500-hour salt spray testing

Service valve has between 3"-4"-5" valve space  provides a minimum working area of 27-square inches for easier access

5" wide, industry leading corner service access  makes repairs easier and faster.

External gauge port access  allows easy connection of low-loss gauge ports

Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance

Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal

Service trays  hold fasteners or caps during service calls

QR code  provides technical information on demand for faster service calls

Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.

High and low pressure standard on all models.

Fujitsu FO2416CSJNBA

Fujitsu FF115245PT96M Gas Furnace 112K BTU 96% AFUE UP-FLOW Not Horiz 2-Stage

• Up to 96% residential gas furnace CSA certified
• 4 way multi-poise design
• Two stages of operation to save energy and maintain optimal comfort level.
• Diagnostics 7-Segment LED all units
• Ignition System  DSI for reliability and longevity
• Water Management System with patented Blocked Drain Sensor
• Heat exchanger is removable for improved serviceability.
• Aluminized steel primary and stainless steel secondary construction provide maximum corrosion resistance and thermal fatigue reliability.
• Low profile 34 inch cabinet ideal for space constrained installations.
• Blower Shelf design  serviceable in all furnace orientations
• Pre marked hoses  insures proper system drainage
• Vent with 2" or 3" PVC
• Replaceable Collector box
• Hemmed edges on cabinet and doors
• Quarter turn fasteners for tool less access
• Integrated control boards feature dip switches for easy system set up
• Self priming condensate trap
• Solid bottom included
• Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193,
  ,
  
  
  
  

  Fujitsu FF115245LT96M

Standard Features:

New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed

Powder coat paint system  for a long lasting professional finish

Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability

Modern cabinet aesthetics  increased curb appeal with visually appealing design

Curved louver panels  provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity

Optimized fan orifice  optimizes airflow and reduces unit sound

Rust resistant screws  confirmed through 1500-hour salt spray testing

PlusOne Expanded Valve Space  3"-4"-5" service valve space  provides a minimum working area of 27-square inches for easier access

PlusOne Triple Service Access  15" wide, industry leading corner service access  makes repairs easier and faster. The two fastener removable corner allows optimal access to internal unit components. Individual louver panels come out once fastener is removed, for faster coil cleaning and easier cabinet reassembly

Diagnostic service window with two-fastener opening  provides access to the high and low pressure.

External gauge port access  allows easy connection of low-loss gauge ports

35% fewer cabinet fasteners and fastener-free base  allow for faster access to internal components and hassle-free panel removal Service trays  hold fasteners or caps during service calls

QR code  provides technical information on demand for faster service calls

Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.

Low ambient control  a pressure sensitive fan cycling control allows operation of units down to 0°F [-18°C].

High pressure control  manual reset control deactivates system if abnormally high pressure occurs.

Low pressure control  automatic reset control deactivates system if abnormally low pressure or refrigerant loss occurs.

Service valves  standard on liquid and suction lines.

Condenser fan motors  direct drive, single-phase permanently lubricated ECM motors with inherent overload protection.

Transformer  50VA step-down type, from Line to 24 volts.

Contactor  the contactor is an electrical switch which operates the compressor and condenser fans. Its 24 volt coil is activated through the High Pressure Control and Low Pressure Control on a call for cooling.

Equipment ground  lug for field connection of ground wire.

Testing  all units are run tested at the factory prior to shipment. Units are shipped with a holding charge of nitrogen.

Compressor time delay control  compressor will remain off for five minutes after power or thermostat interruption, allowing system pressures to equalize. (Model No. RXMD-B01)

Filter/Drier  a liquid line filter drier is shipped with each unit for field installation.

Fujitsu FOC1648VJAZCA1

Rheem A/C RSPMA036JK000 Packaged Air Conditioner Dedicated Horizonta 3 Ton 208/230/1 14 SEER

• Name Rheem RSPM-A036JK000 - Classic 3 Ton, 14 SEER, Packaged Air Conditioner - Dedicated Horizontal, 208-230 V, 1 Ph, 60 Hz
• Weight 333lbs
• Length 59.9"
• Width 34.0"
• Height 33.5"
• SEER 14
• EER 12.2
• Refrigerant R-410A
• CFM 3,400
• Cooling Capacity 36,000 BTU
• Air Flow Horizontal
• Voltage 208/230 VAC
• Phase Single
• Minimum Circuit Amps 22.6
• Maximum Fuse Size 40
• Blower Motor HP 1/2 HP
• Condenser Motor HP 1/3 HP
• Drive Type Direct Drive
• Energy Star Rated Yes,
  ,
  
  
  
  

  Rheem RAWL-091CAZ

Fujitsu FH6024TTSASN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

Fujitsu FH6024TPSJSN

Features

New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed

Powder coat paint system  for a long lasting professional finish

Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability

Modern cabinet aesthetics  increased curb appeal with visually appealing design

Curved louver panels  provide ultimate coil protection, enhance cabinet strength, and increased cabinet rigidity

Optimized fan orifice  optimizes airflow and reduces unit sound

Rust resistant screws  confirmed through 1500-hour salt spray testing

3"-4"-5" service valve space  provides a minimum working area of 27-square inches for easier access

15" wide, industry leading corner service access  makes repairs easier and faster

External gauge port access  allows easy connection of low-loss gauge ports

Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance

Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal

Service trays  hold fasteners or caps during service calls

QR code  provides technical information on demand for faster service calls

Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.

Fujitsu FO6013CSJNA

Features:

Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].

Constructed of aluminum fins bonded to internally grooved aluminum tubing.

Coils are tested at the factory with an extensive refrigerant leak check.

Coils have copper sweat refrigerant connections.

Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.

Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).

Approved for system application with variety of Fujitsu outdoor units.

Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.

Compatible with Germicidal Light System (UV resistant)

Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.

Unique drain pan design maximizes application flexibility and condensate removal.

N-Coil design maximizes performance and minimizes height required at installation.

Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

Fujitsu Unitary FCC3624THA

Features:

Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].

Constructed of aluminum fins bonded to internally grooved aluminum tubing.

Coils are tested at the factory with an extensive refrigerant leak check.

Coils have copper sweat refrigerant connections.

Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.

Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).

Approved for system application with variety of Fujitsu outdoor units.

Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.

Compatible with Germicidal Light System (UV resistant)

Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.

Unique drain pan design maximizes application flexibility and condensate removal.

N-Coil design maximizes performance and minimizes height required at installation.

Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

Fujitsu Unitary FCCN3617SZTA