Home  > FUJITSU(x)
|◀ ◀ 361 - 372 of 1138 ▶ ▶|
View:

Fujitsu Gas Furnace 115,000 BTU AFUE 95% Multipoise Width 24.0" Non-Communicating One Stage

  • 95% AFUE
  • Multi-Position
  • 40,60,70,85,100,115 MBH
  • Constant Torque Blower
  • 1-Stage Gas Valve
  • Direct Spark Ignition
  • Aluminized Steel Heat Exchanger
  • Base Panel & Cabinet Insulation NOT Included
  • Std. LoNOx Compliant
  • 10-Year Warranty (With Registration)

    Fujitsu FF95ST511524M4SNAAS

    • Item#:
    FF95ST511524M4SNAAS
    Manufacturer Item:
    FF95ST511524M4SNAAS
    Manufacturer:
    FUJITSU
     
    FF95ST511524M4SNAAS Product Video

    Air Handler 3 Ton Multi Position 230/1 PSC Motor

  • Front or Bottom Return with aluminum tube and fin coil
  • Flow Check Piston for cooling or heat pump operation
  • Wall-hanging brackets
  • Built in Filter Rack
  • AHRI Certified
  • UL Certified
  • Molex Plug Connections for field installed heater kits
  • Dual Voltage Direct Drive Blower with multi-speed motor
  • Thermoplastic Drain Pan with bottom primary and secondary connections
  • Optional Decorative Grill for front return applications
  • Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

    FHRATT3621MJZTNA

    • Item#:
    FHRATT3621MJZTNA
    Manufacturer Item:
    FHRATT3621MJZTNA
    Manufacturer:
    FUJITSU
     
    FHRATT3621MJZTNA_Broc

    Air Handler 3 Ton Multi Position 120/1 PSC Motor

  • Front or Bottom Return with aluminum tube and fin coil
  • Flow Check Piston for cooling or heat pump operation
  • Wall-hanging brackets
  • Built in Filter Rack
  • AHRI Certified
  • UL Certified
  • Molex Plug Connections for field installed heater kits
  • Dual Voltage Direct Drive Blower with multi-speed motor
  • Thermoplastic Drain Pan with bottom primary and secondary connections
  • Optional Decorative Grill for front return applications
  • Optional Factory Installed Condensate Float Switch which shuts off the outdoor unit in event the condensate pan becomes clogged
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

    FHRATT3621MAZTNA

    • Item#:
    FHRATT3621MAZTNA
    Manufacturer Item:
    FHRATT3621MAZTNA
    Manufacturer:
    FUJITSU
     
    FHRATT3621MAZTNA_Broc

    Air Handler 3 Ton 1-Stage PSC Motor Front Return R410A

  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Front or Bottom Return with Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Rugged Steel Cabinet Construction: Designed for added strength and versatility
  • Most Compact Unit Design Available: All standard air handler models are only 36" [915mm] in height
  • Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect
  • Less than 2% Cabinet Air Leakage at 1-inch H2O: When tested in accordance with ASHRAE Standard 193
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected

    FHFSPS3624SJZTNAN00

    • Item#:
    FHFSPS3624SJZTNAN00
    Manufacturer Item:
    FHFSPS3624SJZTNAN00
    Manufacturer:
    FUJITSU
     
    FHFSPS3624SJZTNAN00_Spec

    Air Handler 3 Ton 1-Stage R410A PSC Motor R410A

  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Versatile 4-Way Convertible Compact Design: Allows for upflow, downflow, horizontal left and horizontal right applications, even in the smallest of spaces
  • Rugged Steel, Compact Cabinet Construction: Designed for added strength and versatility
  • Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect
  • Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE Standard 193
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected

    FHRNPS3621SJZTNA

    • Item#:
    FHRNPS3621SJZTNA
    Manufacturer Item:
    FHRNPS3621SJZTNA
    Manufacturer:
    FUJITSU
     
    FHRNPS3621SJZTNA_Broc

    Fujitsu Gas Furnace 100000 BTU AFUE 80% Multipoise Width 17.5" Non-Communicating Two Stage

  • Features
    80% residential Gas Furnace CSA certified
    Two stages of operation to save energy and maintain optimal comfort level.
    Constant Torque Electrically Commutated Motor
    3 way multi poise design UF / HZ
    PlusOne Diagnostics  7 Segment LED all units
    PlusOne Ignition System  DSI for reliability and longevity
    Heat exchanger is removable for improved serviceability.
    Aluminized steel construction provides maximum corrosion resistance and thermal fatigue reliability.
    Solid doors provide quiet operation
    Solid bottom
    Insulated blower compartment
    Low profile 34" cabinet ideal for space constrained installations
    Blower shelf design  serviceable in all furnace orientations
    Hemmed edges on cabinets and doors
    1/4 turn door knobs for tool less access
    Integrated Control board features dip switches for easy system set up
    QR code for quick access to product information from your smart phone or tablet
    Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

    • Item#:
    FF100174TT80M
    Manufacturer Item:
    FF100174TT80M
    Manufacturer:
    FUJITSU
     
    FF100174TT80M_Broc
    FF100174TT80M_Spec
    FF100174TT80M Product Video

    Fujitsu Gas Furnace 60,000 BTU AFUE 92% Multipoise Width 17.0" Non-Communicating One Stage

  • 92% AFUE
  • Multi-Position
  • 40,60,70,85,100,115 MBH
  • Constant Torque Blower
  • 1-Stage Gas Valve
  • Direct Spark Ignition
  • Aluminized Steel Heat Exchanger
  • Base Panel & Cabinet Insulation NOT Included
  • Std. LoNOx Compliant
  • 10-Year Warranty (With Registration)

    FUJITSU FF92ST306017M4SNAAS

    • Item#:
    FF92ST306017M4SNAAS
    Manufacturer Item:
    FF92ST306017M4SNAAS
    Manufacturer:
    FUJITSU
     
    FF92ST-Series_Spec

    Fujitsu Gas Furnace 75,000 BTU AFUE 80% Multipoise Width 17.0" Non-Communicating Two Stage

  • 80% AFUE
  • Upflow/Horizontal or Downflow Only
  • 50,75,100,125 MBH
  • Variable-Speed Blower
  • 2-Stage Gas Valve
  • Direct Spark Ignition
  • Aluminized Steel Heat Exchanger
  • Base Panel & Cabinet Insulation Included
  • EcoNet Enabled
  • Std. LoNOx Models Available
  • 10-Year Warranty (With Registration)

    Fujitsu FF80TV407517UHNCAAP

    • Item#:
    FF80TV407517UHNCAAP
    Manufacturer Item:
    FF80TV407517UHNCAAP
    Manufacturer:
    FUJITSU
     
    FF80TV407517UHNCAAP Product Video

    Evaporator Coil Cased 5 Ton Muti-Position Standard Efficiency

    Features
  • Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].
  • Constructed of aluminum fins bonded to internally grooved aluminum tubing.
  • Coils are tested at the factory with an extensive refrigerant leak check.
  • Coils have copper sweat refrigerant connections.
  • Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.
  • Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).
  • Approved for system application with variety of Fujitsu outdoor units.
  • Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.
  • Compatible with Germicidal Light System (UV resistant)
  • Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.
  • Unique drain pan design maximizes application flexibility and condensate removal.
  • N-Coil design maximizes performance and minimizes height required at installation.
  • Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

    FCCA6021SZEA

    • Item#:
    FCCA6021SZEA
    Manufacturer Item:
    FCCA6021SZEA
    Manufacturer:
    FUJITSU
     
    FCC-COIL_SPEC

    Air Handler 3 Ton 2-Stage PSC Motor Front Return R410A

  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Front or Bottom Return with Aluminum Indoor Coil Design: Constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Rugged Steel Cabinet Construction: Designed for added strength and versatility
  • Most Compact Unit Design Available: All Standard air handler models are only 36" [915 mm] in height
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3 : An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected

    FHFSTT3624SJZTNAB03

    • Item#:
    FHFSTT3624SJZTNAB03
    Manufacturer Item:
    FHFSTT3624SJZTNAB03
    Manufacturer:
    FUJITSU
     
    FHFSTT3624SJZTNAB03_Spec

    Evaporator Coil Cased N Coil 2 Ton R410A W/TXV High-Efficiency

    Features
  • Fujitsu Indoor Furnace cased coils and replacement uncased coils are designed for use with Fujitsu outdoor units and are available for vertical upflow or downflow, and horizontal left or horizontal right airflow. When matched with Fujitsu outdoor units, the coils provide a nominal capacity range from 18,000 BTU/HR [5.24 kW] to 60,000 BTU/HR [17.6 kW].
  • Constructed of aluminum fins bonded to internally grooved aluminum tubing.
  • Coils are tested at the factory with an extensive refrigerant leak check.
  • Coils have copper sweat refrigerant connections.
  • Feature two sets of 3/4" [14.1 mm] N.P.T. Condensate drain connections for ease of connection.
  • Chatleff metering device connections, at inlet and outlet of TXV or EEV and equalizer connections (TXV only).
  • Approved for system application with variety of Fujitsu outdoor units.
  • Condensate drain pan is constructed of high grade, heat resistant, corrosion free thermal-set material.
  • Compatible with Germicidal Light System (UV resistant)
  • Bi-Directional airflow eliminates the need to switch any internal components from horizontal left to right.
  • Unique drain pan design maximizes application flexibility and condensate removal.
  • N-Coil design maximizes performance and minimizes height required at installation.
  • Coils are AHRI certified for system application with a variety of Fujitsu outdoor units.

    FCC2417THA

    • Item#:
    FCC2417THA
    Manufacturer Item:
    FCC2417THA
    Manufacturer:
    FUJITSU
     
    FCC-COIL_Spec

    Air Handler 1.5 Ton 1-Stage PSC Motor Front Return R410A 21-1/2" W x 36" H x 17" L

  • Quiet Operation1: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
  • Front or Bottom Return with Aluminum Indoor Coil Design: Are constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
  • Rugged Steel Cabinet Construction: Designed for added strength and versatility
  • Most Compact Unit Design Available: All standard air handler models are only 36" [915mm] in height
  • Field-installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect
  • Less than 2% Cabinet Air Leakage at 1-inch H2O: When tested in accordance with ASHRAE Standard 193
  • Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78%2 lower GWP than previous-generation refrigerants  with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
  • Refrigerant Detection System3: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation  if excess refrigerant is detected

    FHFSPS1821SJZTNAB08

    • Item#:
    FHFSPS1821SJZTNAB08
    Manufacturer Item:
    FHFSPS1821SJZTNAB08
    Manufacturer:
    FUJITSU
     
    FHFSPS1821SJZTNAB08_Spec
    |◀ ◀ 361 - 372 of 1138 ▶ ▶|
    View: