Nu-Calgon 4299-T8 Pump Protector, 10 oz Spray Can, Colorless Foam-in shut down corrosion protection for all types of pumps any pump that is shut down and drained part of the time should be safeguarded with aerosol pump protector. Pumps used in cooling towers, swimming pools and vacation homes, auxiliary pumps, marine and industrial pumps can develop corrosion deposits on the impeller and other close-tolerance areas during shut down, causing the pump to bind. Aerosol pump protector prevents this corrosion and lubricates the pump so that it starts right up every time! pump protector is water soluble and will not cause any foaming problem when the pump is started. If the pump is used for drinking water, flush it thoroughly by running water off a few minutes before placing the pump back in service. Protects seasonally operated pumps against corrosion during shutdowns by"winterizing" them. When corrosion occurs in close-tolerance areas, it can cause the impeller to stick or bind. Protect your clients investment and your reputation! Safe for all types of water pumps and it requires no special rinsing at start-up.

• Protects against corrosion and ends-pump impeller binding
• Convenient aerosol package
• Safe for all types of water pumps
• One can is enough for most pumps
• Requires no special rinsing at startup
• Protects pool pumps throughout the winter
• This product has been authorized by the USDA for use in federally inspected meat and poultry plants
• 95% volatile
• Level 1 heat of combustion
• 13 cm flame height, 4 - 5 sec flammability duration Foam-in shut down corrosion protection for all types of pumps any pump that is shut down and drained part of the time should be safeguarded with aerosol pump protector. Pumps used in cooling towers, swimming pools and vacation homes, auxiliary pumps, marine and industrial pumps can develop corrosion deposits on the impeller and other close-tolerance areas during shut down, causing the pump to bind. Aerosol pump protector prevents this corrosion and lubricates the pump so that it starts right up every time! pump protector is water soluble and will not cause any foaming problem when the pump is started. If the pump is used for drinking water, flush it thoroughly by running water off a few minutes before placing the pump back in service. Protects seasonally operated pumps against corrosion during shutdowns by"winterizing" them. When corrosion occurs in close-tolerance areas, it can cause the impeller to stick or bind. Protect your clients investment and your reputation! Safe for all types of water pumps and it requires no special rinsing at start-up.,
  ,
  
  
  
  

  Nu-Calgon 4299-T8

PurCool strips are powerful, economical, preventive maintenance for A/C condensate drain pans. Just place them anywhere in the drain pan where the PurCool strips will contact the condensate water and enjoy up to six months of economical protection. PurCool strips will adhere to the drain pan and will not float or move. They dissolve completely, leaving no residue. Safe for metal and plastic drain pans.

Nu-Calgon 1903D

Nu-Calgon PCG10T Purcool Green Strips 10 Ton,
,

PCG10T

Nu-Calgon 4050-15 UV Leak Detection Kit for 4050-11, 4050-12 EasySeal,
,

Nu-Calgon 4050-15

A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints. It is easily injected into the system, traveling with the refrigerant, searching for leaks. The fact that A/C EasySeal travels with the refrigerant is very important to its ability to find leaks faster, using less sealant than those sealants designed to mix and travel with the systems oil. The A/C EasySeal circulates through the system with the refrigerant seeking out leaks rather than migrating slowly with the oil keeping in mind that only a small portion of the system oil actually migrates with the refrigerant through the system. A/C EasySeal will react with moisture or air that is naturally present at a leak, forming a secure seal. A/C EasySeal is compatible with the refrigerant, oil and all system materials and it will not react until it comes into contact with the air and moisture at the leak, forming a permanent seal. A/C EasySeal is a time saver. It finds leaks quickly and seals them, saving the time and money required in searching for the smallest leaks. With A/C EasySeal, the contractor is able to just add a can to the system and be confident the leak has been fixed and move on to the next job.

• Treats fractional to 1.5 Ton
• Prevents refrigerant leaks and seals existing leaks in air conditioning and refrigeration systems permanently
• Eliminates expensive leak search and repair
• Travels with refrigerant to find leaks fast
• Utilizes a reusable hose

,
,

Nu-Calgon 4050-01

Nu-Calgon EasySeal 4050-06 Refrigerant Leak Sealant, 3 oz Pressurized Can, A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints. It is easily injected into the system, traveling with the refrigerant, searching for leaks. The fact that A/C EasySeal travels with the refrigerant is very important to its ability to find leaks faster, using less sealant than those sealants designed to mix and travel with the systems oil. The A/C EasySeal circulates through the system with the refrigerant seeking out leaks rather than migrating slowly with the oil keeping in mind that only a small portion of the system oil actually migrates with the refrigerant through the system. A/C EasySeal will react with moisture or air that is naturally present at a leak, forming a secure seal. A/C EasySeal is compatible with the refrigerant, oil and all system materials and it will not react until it comes into contact with the air and moisture at the leak, forming a permanent seal. A/C EasySeal is a time saver. It finds leaks quickly and seals them, saving the time and money required in searching for the smallest leaks. With A/C EasySeal, the contractor is able to just add a can to the system and be confident the leak has been fixed and move on to the next job.Sid Harvey Item #:4050-06: Replaces Part #:'s : 39783,
,

Nu-Calgon 4050-06

A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints. It is easily injected into the system, traveling with the refrigerant, searching for leaks. The fact that A/C EasySeal travels with the refrigerant is very important to its ability to find leaks faster, using less sealant than those sealants designed to mix and travel with the systems oil. The A/C EasySeal circulates through the system with the refrigerant seeking out leaks rather than migrating slowly with the oil keeping in mind that only a small portion of the system oil actually migrates with the refrigerant through the system. A/C EasySeal will react with moisture or air that is naturally present at a leak, forming a secure seal. A/C EasySeal is compatible with the refrigerant, oil and all system materials and it will not react until it comes into contact with the air and moisture at the leak, forming a permanent seal. A/C EasySeal is a time saver. It finds leaks quickly and seals them, saving the time and money required in searching for the smallest leaks. With A/C EasySeal, the contractor is able to just add a can to the system and be confident the leak has been fixed and move on to the next job.Sid Harvey Item #:4050-02: Replaces Part #:'s : 39782,
,

4050-02

All viscosities are manufactured by Calumet Lubricant Co. and are approved by Copeland, Trane and other compressor manufacturers, approvals varying by viscosity. They are specifically designed for today's high performance air conditioning and refrigeration compressors. These modern compressors run at higher speeds and generate higher temperatures and they need better lubrication. Use of C-3s, C-4s, and C-5s mineral oil will insure continued efficient system operation, providing the important properties required from a good refrigeration oil. Nu-Calgon mineral oils combine excellent solubility and stability with good floc and pour points to provide excellent low temperature performance.

• Recommended by OEM's for use with CFC's and HCFC's
• Approved by OEM's including Copeland, Carlyle, etc.
• C-3s is approved replacement for 3GS

Sid Harvey Item #:4303-07: Replaces Part #:'s : F49,
,

Calumet 4303-07

Nu-Calgon 4304-07 Refrigeration Oil 1Gallon C-4 300 SUS/32,

,

Nu-Calgon 4304-07

Nu-Calgon 4311-07 Refrigeration Oil 1Gallon ZEROL 300 ALKYLBENZENE,
,

Nu-Calgon 4311-07

FVC68D Refrigeration Polyvinyl Ether Lubricant, 1 qt Can, Clear and Colorless PVE or polyvinyl ether lubricants are finding increased application and use by compressor and equipment manufacturers. The list of OEMs that have tested and approved Idemitsus PVE Lubricants is impressive. PVE lubricants exhibit excellent performance characteristics in air conditioning and refrigeration applications, and they are particularly well suited for use with HFC refrigerants such as R-134a, R-404, R-407C, and R-410A. In fact, PVE lubricants are compatible with all HFC refrigerants. In addition to its solubility and miscibily characteristics, the PVE lubricant provides for increased stability and lubrication. In particular, PVE lubricants do not hydrolyze in the presence of moisture, a very important feature in HVAC/R applications. Additionally, they are compatible with other refrigeration oils and process fluids. PVE lubricants also exhibit compatibility and performance with frequently used anti-wear additives.,
,

Nu-Calgon 4319-24

3M Water Filtration Products High Flow Series Model HF20-S Replacement Cartridge

3M Water 5615103