Home  > NU-CALGON(x)
|◀ 181 - 192 of 214 ▶|
View:
Nu-Calgon 4772-0 Hand Pump Sprayer, 3 Gallon, Polyethylene, White The No. 300P Poly Sprayer is constructed of high-density polyethylene. It has a funnel-top which provides easy chemical pouring and has a 3.5 Gallon capacity (3 Gallon working capacity). It comes with a 10" polypropylene pump, brass handle and extension tube with adjustable nozzle and five feet of wear-resistant hose. The No. 300P Poly Sprayer can be used for spraying solutions of CalClean, Special HD CalClean, Alka-Brite, Nu-Brite, Coil Pow'r and Evap Pow'r-C on air conditioning cooling coils, air-cooled condensers, finned heating coils, refrigeration case or cooler coils, permanent air filters and other greasy, dirty surfaces.
  • Durable polyethylene construction
  • Has funnel top for easy filling
  • Utilizes a metal striking plate to prevent premature fatigue on the pump cap
  • 3.5 Gallon tank holds 3 Gallon of solution which provides good capacity with out being too big to handle
  • Built-in air pump allows good working pressure to be obtained within moments
  • Extension tube and 5 feet of hose permits reaching difficult areas
  • Spray nozzle gives a complete range of spray patterns The No. 300P Poly Sprayer is constructed of high-density polyethylene. It has a funnel-top which provides easy chemical pouring and has a 3.5 Gallon capacity (3 Gallon working capacity). It comes with a 10" polypropylene pump, brass handle and extension tube with adjustable nozzle and five feet of wear-resistant hose. The No. 300P Poly Sprayer can be used for spraying solutions of CalClean, Special HD CalClean, Alka-Brite, Nu-Brite, Coil Pow'r and Evap Pow'r-C on air conditioning cooling coils, air-cooled condensers, finned heating coils, refrigeration case or cooler coils, permanent air filters and other greasy, dirty surfaces.,
Item#:
4772-0
Manufacturer Item:
4772-0
Manufacturer:
NU-CALGON
Everpure Nu-plus nu-i4 Water Filter Cartridge, 12 Gallon, 1/2 micron, 1.67 gpm
    New and improved Micro-Pure II media with AgION antimicrobial protection inhibits any potential bacterial growth
  • Reduces water-related ice machine problems caused by scale build-up from dirt and dissolved minerals
  • Reduces chlorine taste and odor and other offensive contaminants
  • Self-contained scale inhibitor feed keeps ice machines functioning at full capacity
  • Reduces maintenance and service costs by reducing scale and clogging of distribution lines, evaporator plate and pump
  • Precoat submicron technology reduces dirt and particles as small as 1/2 micron in size and reduces health contaminants such as asbestos fibers and cryptosporidium and giardia cysts
  • Sanitary cartridge replacement is simple, quick and clean. Internal filter parts are never exposed to handling or contamination
  • Scale reduction/control as tested by Everpure
  • Bacteriostatic
  • Particulate reduction
  • Premier 6R micromet scale control
  • 1 lb most cubers
  • 2 lb most flakers
  • nu-i42 packing size
Item#:
4621-11
Manufacturer Item:
4621-11
Manufacturer:
NU-CALGON
Nu-Calgon 4770-20 Cal-Shield Polyethylene Sprayer 1 Gallon
Item#:
4770-20
Manufacturer Item:
4770-20
Manufacturer:
NU-CALGON
Nu-Calgon 4770-2 The No. 100P poly sprayer is constructed of high-density polyethylene. It has a funnel top which provides for easy chemical pouring and has a oneGallon working capacity. It comes with a 10" polypropylene pump, brass handle and extension wand with adjustable nozzle, a wear-resistant hose and a pressure relief valve.
Item#:
4770-2
Manufacturer Item:
4770-2
Manufacturer:
NU-CALGON
Nu-Calgon 4773-0 Clean Connect Sprayer,
Nu-Calgon 4773-0
Item#:
4773-0
Manufacturer Item:
4773-0
Manufacturer:
NU-CALGON
Nu-Calgon 4720-06 pH-treat is an in-line treatment product for the treatment of the condensate water produced by today's high efficiency furnaces. The condensate produced by these furnaces is acidic and must be neutralized prior to putting to the drain. In fact, some communities are passing regulations banning the discharge of acidic condensate. Introducing pH-Treat, a product to put on the drain line for the purpose of neutralizing the acid nature of the condensate water produced.,
Item#:
4720-06
Manufacturer Item:
4720-06
Manufacturer:
NU-CALGON
Nu-Calgon 4776-0 The Talon Flexible Aerosol Wand is a specially developed 27" length accessory to be used exclusively with Nu-Calgon's Evap Foam No Rinse, Blackhawk and PenetrateHD aerosol products. The device provides precision spraying in tough-to-reach locations, especially when injecting product into a small opening. The reusable Talon is highly flexible yet has shape memory when navigating around equipment components or cabinetry to spray. The Talon is developed for Nu-Calgon's Evap Foam No Rinse and Blackhawk aerosol-based coil cleaners or applying Penetrate HD, a super penetrating lubricant, in tough-to reach locations. The Talon Flexible Aerosol Wand provides precision spray control in field situations where it's simply difficult to fit/orientate the aerosol canister by itself around existing obstructions. In addition, with better spray control in tough-to-reach locations, there is less unwanted product waste on adjacent surfaces. The Talon is a must have service tool
Item#:
4776-0
Manufacturer Item:
4776-0
Manufacturer:
NU-CALGON
Nu-Calgon 4774-1 For use with Nu-Calgon's popular coil gun (4774-0) in the cleaning of air-cooled condenser coils. The coil gun probe is a time saving accessory with its 90 deg direction of spray that allows cleaning from inside the coil. In many cases, this can be accomplished without removing the top cover of the outdoor unit. Also, the tool provides easy access in tough to reach locations to discharge debris and emulsified grime in an outwardly direction from the coil
Item#:
4774-1
Manufacturer Item:
4774-1
Manufacturer:
NU-CALGON
Nu-Calgon 4771-20 Chemical Sprayer 2 Gallon
Item#:
4771-20
Manufacturer Item:
4771-20
Manufacturer:
NU-CALGON
Nu-Calgon 4774-0 For spraying coil cleaners such as Nu-Brite, CalClean, HD CalClean, Alka-Brite Plus, Tri-Pow'r HD or any of the other quality Nu-Calgon coil cleaners for cleaning air cooled condensers, evaporator coils, etc. No pre-mixing is necessary as chemical and water are automatically blended in mixing head as you spray. Use for coil cleaning as well as in food preparation areas, wash rooms, or any situation where use of water-diluted chemicals are required.
    The coil gun probe provides easy access for inside out cleaning of coils
  • Recommended water pressure 40 - 60 psi
  • Quick-disconnect feature
  • Foam wand to enhance foaming
  • Deflector tip to fan out spray
  • Connects to optional coil gun probe accessory (4774-1) for 90 deg direction of spray inside the coil
Item#:
4774-0
Manufacturer Item:
4774-0
Manufacturer:
NU-CALGON
Nu-Calgon 4603-01 Acid Pump 115 VAC 31-Tx1,
Item#:
4603-01
Manufacturer Item:
4603-0
Manufacturer:
NU-CALGON
Nu-Calgon 4900-35 iWave-M Air Purifier for Ductless HVAC Systems up to 1,600 CFM
Nu-Calgon 4900-35
Item#:
4900-35
Manufacturer Item:
4900-35
Manufacturer:
NU-CALGON
|◀ 181 - 192 of 214 ▶|
View: