Nu-Calgon DuraCoil 4083-90 Rust Coil and Surface Protectant, 11 oz Can

• Durable, OEM-approved Heresite coating
• Protects coils from corrosion
• For coils in coastal regions or in industrial or agricultural settings, protects refrigeration coils against food acids
• Causes negligible transfer loss
• Great to repair an OEM coil coating
• Fast, air-dry formula bonds to all metals
• DuraCoil is a brown-colored coating

Nu-Calgon 4083-90

This highly active solvent blend provides maximum performance in a degreasing solvent without the use of ozone depleters or chlorinated solvents. Powerful blasting spray removes grease, oily dirt and contaminants. This special formula is also suitable for cleaning equipment, tools plus parts and meets or exceeds current OTC VOC requirements. Use Degreasing Solvent LV (Low VOC) for California, Utah and New Hampshire. IMPORTANT: Do not spray on hot or warm surfaces. This product will affect certain plastics, rubber, various elastomers, and some paints. Always test in an inconspicuous area to check product for compatibility.

Nu-Calgon 4083-83

Freez-Kontr'l is a formulation of propylene glycol, dipotassium phosphate corrosion inhibitor and de-ionized water. The fluid is colored blue to aid in leak detection. It has an operating temperature range from below -60 to 230 deg F and solutions in water provide freeze protection to below -60 deg F and burst protection to below -100 deg F. Freez-Kontr'l is nearly odorless and the product of choice when contact with potable water is possible. The ingredients used in its manufacture are GRAS (generally recognized as safe), under Title 21, Part 182 of the US Code of Federal Regulations, where accidental or incidental contact with potable water could occur.

• Optimum freeze or burst protection
• Fully inhibited to prevent corrosion
• Non-flammable
• Uses renewable resourced propylene glycol
• Low in acute oral toxicity
• Colored blue for easy leak detection
• The complete heat transfer fluid and antifreeze

  Nu-Calgon 4189-01

This highly active solvent blend provides maximum performance in a degreasing solvent without the use of ozone depleters or chlorinated solvents. Powerful blasting spray removes grease, oily dirt and contaminants. This special formula is also suitable for cleaning equipment, tools plus parts and meets or exceeds current OTC VOC requirements. Use Degreasing Solvent LV for Low VOC in California.Sid Harvey Item #:4083-75: Replaces Part #:'s : 4719,

Nu-Calgon 4083-75

Foam-Brite's foaming power is incredible. It is a non-acidic, alkaline-based cleaner and brightener containing the best available biodegradable ingredients and a unique chelant/surfactant package to quickly penetrate and remove greasy soils and oxidation. Its high foaming formula helps lift greasy soils out of the coil, leaving finned coils clean and bright. It can be used to replace the more dangerous HF acid-based products for condenser coil cleaning because Foam-Brite does not contain any acids.Sid Harvey Item #:4178-08: Replaces Part #:'s : 4744,

Nu-Calgon 4178-08

Foam-Brite's foaming power is incredible. It is a non-acidic, alkaline-based cleaner and brightener containing the best available biodegradable ingredients and a unique chelant/surfactant package to quickly penetrate and remove greasy soils and oxidation. Its high foaming formula helps lift greasy soils out of the coil, leaving finned coils clean and bright. It can be used to replace the more dangerous HF acid-based products for condenser coil cleaning because Foam-Brite does not contain any acids.

Nu-Calgon 4178-05

Nu-Calgon's Cal-Green is specially formulated for cleaning all aluminum constructed condensers, including the latest microchannel designs in the HVAC/R market. Also, Cal-Green is ideal for cleaning traditional copper tube/aluminum fin designed heat exchangers. Besides being formulated to meet OEM guidelines for all aluminum constructed coils, Cal-Green is part of Nu-Calgon's Green Select program since it utilizes ingredients that are safer choices as approved by the EPA under their safer choice direct release program. The coil cleaner has been extensively tested to provide performance while using ingredients that have an excellent eco-profile. Cal-Green performs well and is safer for people and the environment.Sid Harvey Item #:4190-08: Replaces Part #:'s : 37939,

Nu-Calgon 4190-08

Eco-Lyme is a new odorless chemistry for the HVAC/R market that provides a unique blend of performance and safety to the environment and user. The product is specially formulated to achieve descaling behaviour of competing hydrochloric acid based descalers. However, the active ingredient is substantially safer on equipment metals. Eco-Lyme is ideal for stainless steel construction - eliminates the issue of localized corrosion/pitting caused by repeated use of hydrochloric acid. Eco-Lyme is readily biodegradable per OECD 301A, a recognized international method for determining biodegradability for applicable chemistry. Eco-Lyme uniquely provides top-tier performance with a validated eco-profile when a 'green' descaler is sought.

• Powerful environmentally friendly descaler
• New chemistry rapidly removes scale and rust - similar in performance to hydrochloric acid (also described as hydrogen chloride)
• Significantly safer on metals than competing hydrochloric acid based descalers
• Safe on carbon steel, aluminum, stainless steel and copper
• Readily biodegradable
• Odorless - making it safer to handle
• Low foaming chemistry for added safety

,
,

Nu-Calgon 4167-08

Nu-Calgon 4167-05 Biodegradable Eco-Lyme Descaler 5 Gallon,
,

Nu-Calgon 4167-05

Keep humidifiers clean and scale free with Humidi-Pro. Inhibits scale for one season. Install on the water line that supplies water directly to the humidifier.

• Designed for humidifiers using up to 25 Gallon/day
• Equipped with john guest fitting for easy installation and seasonal change-outs
• Can be installed vertically or horizontally
• Not to be used on hot water lines
• Install with plastic tubing only, if copper tubing is used, the lead edges must be beveled to avoid sharp end severing the internal o-ring
• Water treatment, corrosion and scale control
• Slowly-soluble glassy polyphosphate
• Glassy beads or crystal appearance
• 6.5 - 7.5 pH
• 1200 deg F melting points

Sid Harvey Item #:4190-02: Replaces Part #:'s : 37981,
,

Nu-Calgon 4190-02

Nu-Calgon EasySeal 4050-12 Direct Inject-UV Dye Refrigerant Leak Sealant, EasySeal direct inject is the strongest sealant on the market, with over a million leaks sealed. With this new injection system, pumping down the unit is a thing of the past. And now the industry's leading refrigeration sealant has been combined with UV leak detection dye to give you EasySeal direct inject-UV. This product is designed to seal leaks and also show where larger leaks are with the use of the UV Leak Detection Kit (4050-15).,
,

Nu-Calgon 4050-12