All FasNSeal (single-wall) vent lengths and components feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90 deg from mechanical locking bands. This construction feature allows for ease of installation. The 1/2" air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield for additional safety. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time.

M & G Duravent FSAAU3

All FasNSeal (single-wall) vent lengths and components feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90 deg from mechanical locking bands. This construction feature allows for ease of installation. The 1/2" air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield for additional safety. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time.

M & G Duravent FSVL3603

Duravent FSWT4 Fas-n-Seal Wall Thimble 3",
,

All FasNSeal (single-wall) vent lengths and components feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90 deg from mechanical locking bands. This construction feature allows for ease of installation. The 1/2" air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield for additional safety. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time.

M & G Duravent FSVL2403

All FasNSeal (single-wall) vent lengths and components feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90 deg from mechanical locking bands. This construction feature allows for ease of installation. The 1/2" air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield for additional safety. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time.

• FasNSeal is for use with natural gas or propane categories II, III and IV appliances or type BH gas vent systems, having a maximum rated operating temperature of 480 deg F and a maximum positive pressure of 15" water column
• FasNSeal can be used on a wide range of applications, including high efficiency gas boilers, furnaces, booster heaters, pool heaters, water heaters, unit heaters or tankless water heatersM & G Duravent FST3 Fas-n-Seal Tee 3",
  ,
  
  
  

All FasNSeal (single-wall) vent lengths and components feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90 deg from mechanical locking bands. This construction feature allows for ease of installation. The 1/2" air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield for additional safety. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time.

M & G Duravent FSTT3

An economical venting system used for relining masonry chimney for natural gas or liquid propane category, draft hood equipped appliances and appliances tested and listed to use Type B gas vent for a wide range of applications, including natural gas fireplaces, gas-fired furnaces, boilers, water heaters, and wall or space heating applications. Protects the masonry chimney from damaging effects of flue product condensation.

An economical venting system used for relining masonry chimney for natural gas or liquid propane category, draft hood equipped appliances and appliances tested and listed to use Type B gas vent for a wide range of applications, including natural gas fireplaces, gas-fired furnaces, boilers, water heaters, and wall or space heating applications. Protects the masonry chimney from damaging effects of flue product condensation.

• DuraFlex aluminum is designed for flexible relining masonry chimneys when using natural gas or liquid propane
• 1-wall construction
• 0" clearance to masonry
• DuraFlex aluminum length, duraflex aluminum cap, duraflex top plate, and duraflex mortar sleeve included
• Limited lifetime warranty
• Includes DuraFlex AL length, DuraFlex AL cap, DuraFlex top plate and, DuraFlex mortar sleeve

Sid Harvey Item #:TLK0625: Replaces Part #:'s : 24683,
,

An economical venting system used for relining masonry chimney for natural gas or liquid propane category, draft hood equipped appliances and appliances tested and listed to use Type B gas vent for a wide range of applications, including natural gas fireplaces, gas-fired furnaces, boilers, water heaters, and wall or space heating applications. Protects the masonry chimney from damaging effects of flue product condensation.

M & G Duravent TLK0635

An economical venting system used for relining masonry chimney for natural gas or liquid propane category, draft hood equipped appliances and appliances tested and listed to use Type B gas vent for a wide range of applications, including natural gas fireplaces, gas-fired furnaces, boilers, water heaters, and wall or space heating applications. Protects the masonry chimney from damaging effects of flue product condensation.

M & G Duravent TLK0335

An economical venting system used for relining masonry chimney for natural gas or liquid propane category, draft hood equipped appliances and appliances tested and listed to use Type B gas vent for a wide range of applications, including natural gas fireplaces, gas-fired furnaces, boilers, water heaters, and wall or space heating applications. Protects the masonry chimney from damaging effects of flue product condensation.

• DuraFlex aluminum is designed for flexible relining masonry chimneys when using natural gas or liquid propane
• 1-wall construction
• 0" clearance to masonry
• DuraFlex aluminum length, duraflex aluminum cap, duraflex top plate, and duraflex mortar sleeve included
• Limited lifetime warranty
• Includes DuraFlex AL length, DuraFlex AL cap, DuraFlex top plate and, DuraFlex mortar sleeve

Sid Harvey Item #:TLK0635: Replaces Part #:'s : 24684,
,

An economical venting system used for relining masonry chimney for natural gas or liquid propane category, draft hood equipped appliances and appliances tested and listed to use Type B gas vent for a wide range of applications, including natural gas fireplaces, gas-fired furnaces, boilers, water heaters, and wall or space heating applications. Protects the masonry chimney from damaging effects of flue product condensation.

• DuraFlex aluminum is designed for flexible relining masonry chimneys when using natural gas or liquid propane
• 1-wall construction
• 0" clearance to masonry
• DuraFlex aluminum length, duraflex aluminum cap, duraflex top plate, and duraflex mortar sleeve included
• Limited lifetime warranty
• Includes DuraFlex AL length, DuraFlex AL cap, DuraFlex top plate and, DuraFlex mortar sleeve

Sid Harvey Item #:TLK0635: Replaces Part #:'s : 24684,

M & G Duravent TLK0735