Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 673 - 684 of 1132 ▶ ▶|
View:

Oil Burner International Comfort Products

International Comfort Products Fast Heating Parts N01F054 Oil Burner International Comfort Products

International Comfort Products Fast Heating Parts N01F054

Item#:
N01F054
Manufacturer Item:
N01F054
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS

Oil Burner OM4 Chimney Vented Oil Furnace International Comfort Products

International Comfort Products N01F053 Oil Burner OM4

N01F053

Item#:
N01F053
Manufacturer Item:
N01F053
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS

Oil Burner OMF112 Chimney Vented Oil Furnace International Comfort Products

International Comfort Products N01F052 Oil Burner OMF112

N01F052

Item#:
N01F052
Manufacturer Item:
N01F052
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS

ICP Heat Pump Condensing Unit High Efficiency 4 Ton


  • Copeland Scroll compressors on all models
  • Suction line accumulator factory installed
  • Bi- flow filter- drier included for field installation
  • Integrated solid state control with Time- Temperature Defrost
  • Low pressure switch
  • Copper tube/aluminum fin coil
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant
  • Baked- on powder coat finish over Galvanized steel
  • Post- painted (black) coil fins
  • Coated, weather- resistant cabinet screws
  • Coated inlet grille with 3/8grille spacing for extra protection
  • 5 year compressor limited warranty
  • 5 year parts limited warranty (including compressor and coil) - With timely registration, an additional 5 year parts limited warranty (including compressor and coil)
Item#:
NXH548GKP
Manufacturer Item:
NXH548GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
 
NXH548GKP-Service_Misc
NXH548GKP_Broc
NXH548GKP_Install
NXH548GKP_Spec

Air Conditioning Condensing Unit Horizontal Discharge 5 Ton

International Comfort Products Horizontal Discharge Air Conditioner
  • Scroll compressors on all models
  • Factory supplied filter drier
  • High-pressure switch
  • Line lengths up to 250 feet (76.2m)
  • Low-ambient operation (down to 0°F/-17.8°C)
  • Ball bearing fan motor
  • Five-year parts limited warranty (including compressor and coil) With timely registration, an additional five-year parts limited warranty (including compressor and coil) * For residential applications only. See warranty certificate for complete details and restrictions, including warranty coverage for other applications.
  • Small footprint
  • Easy access service valves on all models
  • Factory charged with R-410A refrigerant
,
Item#:
NH4A460AK
Manufacturer Item:
NH4A460AKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
 
NH4A-ICP_Install

Air Conditioning Condensing Unit Horizontal Discharge 3 Ton

International Comfort Products Horizontal Discharge Air Conditioner
  • Scroll compressors on all models
  • Factory supplied filter drier
  • High-pressure switch
  • Line lengths up to 250 feet (76.2m)
  • Low-ambient operation (down to 0°F/-17.8°C)
  • Ball bearing fan motor
  • Five-year parts limited warranty (including compressor and coil) With timely registration, an additional five-year parts limited warranty (including compressor and coil) * For residential applications only. See warranty certificate for complete details and restrictions, including warranty coverage for other applications.
  • Small footprint
  • Easy access service valves on all models
  • Factory charged with R-410A refrigerant
,
Item#:
NH4A436AKA
Manufacturer Item:
NH4A436AKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
 
NH4A-ICP_Install

ICP Heat Pump Condensing Unit High Efficiency 2.5 Ton


  • Copeland Scroll compressors on all models
  • Suction line accumulator factory installed
  • Bi- flow filter- drier included for field installation
  • Integrated solid state control with Time- Temperature Defrost
  • Low pressure switch
  • Copper tube/aluminum fin coil
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant
  • Baked- on powder coat finish over Galvanized steel
  • Post- painted (black) coil fins
  • Coated, weather- resistant cabinet screws
  • Coated inlet grille with 3/8grille spacing for extra protection
  • 5 year compressor limited warranty
  • 5 year parts limited warranty (including compressor and coil) - With timely registration, an additional 5 year parts limited warranty (including compressor and coil)
Item#:
NXH530GKP
Manufacturer Item:
NXH530GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
 
NXH5-ICP-Service_Misc
NXH5-ICP_Broc
NXH5-ICP_Install
NXH5-ICP_Spec

80% Standard NOX Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet

    International Comfort Products N80ESN0701712A

    • Item#:
    N80ESN0701712A
    Manufacturer Item:
    N80ESN0701712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80ESN-ICP-Care_Misc
    N80ESN-ICP_Install
    N80ESN0701712A_Spec

    80% Standard NOX Gas Heating Furnace 33-1/3" H x 24-1/2" W x 29" D

  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet

    N80ESN1352420A

    • Item#:
    N80ESN1352420A
    Manufacturer Item:
    N80ESN1352420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80ESN-ICP-Care_Misc
    N80ESN-ICP_Install
    N80ESN1352420A_Spec

    Air Conditioning Condensing Unit 1.5 Ton 13.4 SEER 2 Stage R454B Filter Drier Scroll Compressor

    Efficiency
  • 13.4 - 16.0 SEER2 / 11.0  13.5 EER2
  • Indoor air quality accessories available Comfort
  • System supports programmable or standard thermostat controls Reliability
  • Non-ozone depleting, low global warming potential R-454B refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier Durability Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard Applications
  • Longline  up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.4 m) evaporator above condenser (See Long Line Guide for more information.)
  • Low ambient cooling (down to 0°F / -18°C ) with approved low ambient accessory kits.
    • Item#:
    N5A4S18AKANA
    Manufacturer Item:
    N5A4S18AKANA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N5A4S_SPEC

    96% Direct Vent 2-Pipe Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartmen
    t
  • All sizes can be installed in air quality management districts with a 40 ng/J
  • NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422, 1402422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)

    International Comfort Products N96MSN0802120A

    • Item#:
    N96MSN0802120A
    Manufacturer Item:
    N96MSN0802120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96MSN-Care_Misc
    N96MSN_Install

    ICP Heat Pump Condensing Performance Series 5 Ton

    Quiet performance
  • Single-stage compressor operation
  • Dual fuel capable with a compatible gas furnace and thermostat for energy-saving heating
  • Durably built to withstand bad weather and debris
  • Designed for corrosion resistance and lasting performance
  • Single-speed fan motor
  • System protecting high and low-pressure switches and filter drier
  • Durable, protective inlet grille panels allow easy coil cleaning
  • Baked-on powder coat finish over Gallonvanized steel
  • Compatible with humidity sensing thermostats
  • Suction line accumulator factory installed
  • Bi-flow filter-drier included for field installation
  • Integrated solid state control with time-temperature defrost
  • High and low pressure switches
  • Copper tube/aluminum fin coil
  • Easy access service valves
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Post-painted (black) coil fins
  • Coated, weather-resistant cabinet screws
  • Coated inlet grille with 3/8" spacing for extra protection

    N4H460GH

    • Item#:
    N4H460GH
    Manufacturer Item:
    N4H460GHP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N4H4-ICP-Wiring_Misc
    N4H4-ICP_Broc
    N4H4-ICP_Install
    |◀ ◀ 673 - 684 of 1132 ▶ ▶|
    View: