Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 97 - 108 of 1132 ▶ ▶|
View:

Air Handler Multi-Position 3-1/2 Ton 42K BTU 208/230/1 ECM Motor TXV R410A 49-5/8" H x 21-1/8" L x 22" D

Standard Features
  • Limited Warranty*
  • Multi-tap ECM (electronic commutating motor) motors - all sizes
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Cabinet construction features innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Cabinet air leakage of less than 2% at 0.5 in.W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units
  • Horizontal hanging provisions on cabinet
  • No tools required to access filter
  • Newly improved filter rack area filter door insulation added for improved air seal
  • 3- through 30-kW accessory heaters - field installed
  • Factory-supplied power plug
  • Easy plug-in provisions for heater installation
  • Entry options for high and low voltage wiring hook-up
  • Leak-preventing sweat connections
  • Thermostatic expansion valve, TXV, on all sizes
  • Designed for manufactured housing applications

    International Comfort Products FJMA4X42L0CB

    • Item#:
    FJMA4X42L0CB
    Manufacturer Item:
    FJMA4X42L0CB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FJMA4X
    FJMA4X42L0CB_Spec

    ICP Heat Pump Condensing Unit 1-Stage 5 Ton

    Efficiency
  • 14.3 - 15.2 SEER2 / 11.0 - 12.5 EER2 / 7.5 - 8.1 HSPF2
  • (depending on unit size and indoor combination installed)
  • Indoor air quality accessories available
  • Sound
  • Sound levels as low as 69 dBA with accessory sound blanket
  • Comfort
  • System supports programmable or standard thermostat controls
  • Reliability
  • Non-ozone depleting refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Loss of charge switch
  • Filter drier
  • Balanced refrigeration system for maximum reliability
    • Item#:
    N4H5S60CKAAA
    Manufacturer Item:
    N4H5S60CKAAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N4H5S-ICP-Service_Misc
    N4H5S-ICP_Install
    N4H5S-ICP_Spec

    Air Conditioning Condensing Unit Filter Dryer Scroll Compressor 2 Ton

    Efficiency
  • 13.4 - 16.0 SEER2 (13.5 - 16.5 SEER)
  • 11.0  13.5 EER2 (11.0 - 14.5 EER)
  • Indoor air quality accessories available
  • Reliability
  • Refrigerant - environmentally sound, wont deplete the ozone layer and low lifetime service cost.
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
  • Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard
    • Item#:
    R4A5S24AKAWA
    Manufacturer Item:
    R4A5S24AKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4A4S-ICP_Install

    Air Handler Multi-Position 3 Ton 36K BTU 208/230/1 ECM Motor TXV R410A 49-5/8" H x 17-5/8" L x 22" D

    Standard Features
  • Limited Warranty*
  • Multi-tap ECM (electronic commutating motor) motors - all sizes
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Cabinet construction features innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Cabinet air leakage of less than 2% at 0.5 in.W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units
  • Horizontal hanging provisions on cabinet
  • No tools required to access filter
  • Newly improved filter rack area filter door insulation added for improved air seal
  • 3- through 30-kW accessory heaters - field installed
  • Factory-supplied power plug
  • Easy plug-in provisions for heater installation
  • Entry options for high and low voltage wiring hook-up
  • Leak-preventing sweat connections
  • Thermostatic expansion valve, TXV, on all sizes
  • Designed for manufactured housing applications

    International Comfort Products FJMA4X36L0BB

    • Item#:
    FJMA4X36L0BB
    Manufacturer Item:
    FJMA4X36L0BB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FJMA4X
    FJMA4X36L0BB_Spec

    ICP Heat Pump Condensing Unit 1-Stage 5 Ton

    Efficiency
  • 14.3 - 15.2 SEER2 / 11.0 - 12.5 EER2 / 7.5 - 8.1 HSPF2
  • (depending on unit size and indoor combination installed)
  • Indoor air quality accessories available
  • Sound
  • Sound levels as low as 69 dBA with accessory sound blanket
  • Comfort
  • System supports programmable or standard thermostat controls
  • Reliability
  • Non-ozone depleting refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Loss of charge switch
  • Filter drier
  • Balanced refrigeration system for maximum reliability
    • Item#:
    N4H5S60AKAAA
    Manufacturer Item:
    N4H5S60AKAAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N4H5S-ICP-Service_Misc
    N4H5S-ICP_Install
    N4H5S-ICP_Spec

    Package Roof Top Unit Gas 5 Ton 60K BTU 14 SEER 208/230/3 Hi Heat,X-Vane,Direct Drive Medium Static

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection

    International Comfort Products Commercial RGV060HFFA0AAA

    • Item#:
    RGV060HFFA0AAA
    Manufacturer Item:
    RGV060HFFA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc

    Air Conditioning Condensing Unit Filter Dryer Scroll Compressor 1.5 Ton

    Efficiency
  • 13.4 - 16.0 SEER2 (13.5 - 16.5 SEER)
  • 11.0  13.5 EER2 (11.0 - 14.5 EER)
  • Indoor air quality accessories available
  • Reliability
  • Refrigerant - environmentally sound, wont deplete the ozone layer and low lifetime service cost.
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
  • Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard
    • Item#:
    R4A5S18AKAWA
    Manufacturer Item:
    R4A5S18AKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4A4S-ICP_Install

    Air Handler Multi-Position 2-1/2 Ton 30K BTU 208/230/1 ECM Motor TXV R410A 49-5/8" H x 17-5/8" L x 22" D

    Standard Features
  • Limited Warranty*
  • Multi-tap ECM (electronic commutating motor) motors - all sizes
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Cabinet construction features innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Cabinet air leakage of less than 2% at 0.5 in.W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units
  • Horizontal hanging provisions on cabinet
  • No tools required to access filter
  • Newly improved filter rack area filter door insulation added for improved air seal
  • 3- through 30-kW accessory heaters - field installed
  • Factory-supplied power plug
  • Easy plug-in provisions for heater installation
  • Entry options for high and low voltage wiring hook-up
  • Leak-preventing sweat connections
  • Thermostatic expansion valve, TXV, on all sizes
  • Designed for manufactured housing applications

    International Comfort Products FJMA4X30L0BB

    • Item#:
    FJMA4X30L0BB
    Manufacturer Item:
    FJMA4X30L0BB
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FJMA4X
    FJMA4X30L0BB_Spec

    ICP Heat Pump Condensing Unit 1-Stage 4 Ton

    Efficiency
  • 14.3 - 15.2 SEER2 / 11.0 - 12.5 EER2 / 7.5 - 8.1 HSPF2
  • (depending on unit size and indoor combination installed)
  • Indoor air quality accessories available
  • Sound
  • Sound levels as low as 69 dBA with accessory sound blanket
  • Comfort
  • System supports programmable or standard thermostat controls
  • Reliability
  • Non-ozone depleting refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Loss of charge switch
  • Filter drier
  • Balanced refrigeration system for maximum reliability
    • Item#:
    N4H5S48CKAAA
    Manufacturer Item:
    N4H5S48CKAAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N4H5S-ICP-Service_Misc
    N4H5S-ICP_Install
    N4H5S-ICP_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 14-3/16" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
    • Item#:
    G80CTL0701412A
    Manufacturer Item:
    G80CTL0701412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec

    Air Conditioning Condensing Unit Performance Series 5 Ton

    Efficiency
  • 13.4 - 16.0 SEER2 (13.5 - 16.5 SEER)
  • 11.0  13.5 EER2 (11.0 - 14.5 EER)
  • Indoor air quality accessories available
  • Reliability
  • Refrigerant - environmentally sound, wont deplete the ozone layer and low lifetime service cost.
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
  • Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard
    • Item#:
    R4A4S60AKANA
    Manufacturer Item:
    R4A4S60AKANA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4A4S-ICP_Install

    Air Handler Multi-Position 2 Ton 24K BTU ECM Motor TXV 208/230/1 R410A 49-5/8" H x 17-5/8" L x 22" D

    Standard Features
  • Limited Warranty*
  • Multi-tap ECM (electronic commutating motor) motors - all sizes
  • Large, grooved tube, louvered fin coils
  • Efficient, quiet, time-tested blower housings and diffusers
  • Sturdy, drainable condensate pans
  • Cabinet construction features innovations designed to prevent cabinet sweating
  • Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
  • Super-thick R-4.2 insulation with vapor barrier
  • Cabinet air leakage of less than 2% at 0.5 in.W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE 193 standard.
  • Installation-flexible, multipoise units
  • Horizontal hanging provisions on cabinet
  • No tools required to access filter
  • Newly improved filter rack area filter door insulation added for improved air seal
  • 3- through 30-kW accessory heaters - field installed
  • Factory-supplied power plug
  • Easy plug-in provisions for heater installation
  • Entry options for high and low voltage wiring hook-up
  • Leak-preventing sweat connections
  • Thermostatic expansion valve, TXV, on all sizes
  • Designed for manufactured housing applications
    • Item#:
    FJMA4X24L0BC
    Manufacturer Item:
    FJMA4X24L0BC
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FJMA4X
    FJMA4X24L0BC_Spec
    |◀ ◀ 97 - 108 of 1132 ▶ ▶|
    View: