Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 1069 - 1080 of 1132 ▶ ▶|
View:

Tempstar ICP Heat Pump Condensing Unit High Efficiency 3 Ton

Copeland Scroll compressors on all models
  • Suction line accumulator factory installed
  • Biflow filterdrier included for field installation
  • Integrated solid state control with TimeTemperature Defrost
  • External high and low refrigerant service ports
  • Copper tube / aluminum fin coil
  • Communicating, selfconfiguring operation when used with observer Wall Control (TSTAT0101SC)
  • Outdoor temperature sensor factory installed
  • Compressor sound blanket standard
  • Isolation compressor grommets
  • Text based diagnostics with Observer Communicating Wall Control
  • Easy access service valves on all models
  • Innovative control box design
  • High and low pressure switches
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant
  • High gloss, bakedon powder coat finish over Gallonvanized steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection
  • Corner posts for extra strength and style
  • 5 year No Hassle Replacement limited warranty
  • 5 year parts limited warranty (including compressor and coil)  With timely registration, an additional 5 year parts limitedwarranty (including compressor and coil) TSTAT0101SC
  • This product has been designed and manufactured to meet ENERGY STAR criteria for energy efficiency when matched with appropriate coil components. However,proper refrigerant charge and proper air flow are critical to achieve rated capacity and efficiency. Installation of this product should follow the manufacturers refrigerantcharging and air flow instructions. Failure to confirm proper charge and airflow may reduce energy efficiency and shorten equipment life. Use of the AHRI Certified TM Mark indicates amanufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org .* Applies to original purchaser/homeowner, some limitations may apply. See Warranty certificate for complete details

    • Item#:
    TSH636GKA
    Manufacturer Item:
    TSH636GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    TSH636GKA_Spec

    Tempstar ICP Heat Pump Condensing Unit High Efficiency 4 Ton

    Copeland Scroll compressors on all models
  • Suction line accumulator factory installed
  • Biflow filterdrier included for field installation
  • Integrated solid state control with TimeTemperature Defrost
  • External high and low refrigerant service ports
  • Copper tube / aluminum fin coil
  • Communicating, selfconfiguring operation when used with observer Wall Control (TSTAT0101SC)
  • Outdoor temperature sensor factory installed
  • Compressor sound blanket standard
  • Isolation compressor grommets
  • Text based diagnostics with Observer Communicating Wall Control
  • Easy access service valves on all models
  • Innovative control box design
  • High and low pressure switches
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant
  • High gloss, bakedon powder coat finish over Gallonvanized steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection
  • Corner posts for extra strength and style
  • 5 year No Hassle Replacement limited warranty
  • 5 year parts limited warranty (including compressor and coil)  With timely registration, an additional 5 year parts limitedwarranty (including compressor and coil) TSTAT0101SC
  • This product has been designed and manufactured to meet ENERGY STAR criteria for energy efficiency when matched with appropriate coil components. However,proper refrigerant charge and proper air flow are critical to achieve rated capacity and efficiency. Installation of this product should follow the manufacturers refrigerantcharging and air flow instructions. Failure to confirm proper charge and airflow may reduce energy efficiency and shorten equipment life. Use of the AHRI Certified TM Mark indicates amanufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org .* Applies to original purchaser/homeowner, some limitations may apply. See Warranty certificate for complete details


    Anderson Fittings W47

    • Item#:
    TSH648GKA
    Manufacturer Item:
    TSH648GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    TSH648GKA_Spec

    Thermostat ION Smart

    Item#:
    TSTATIIEWF
    Manufacturer Item:
    TSTATIIEWF
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Thermostat WiFi Connect 43FX

    Item#:
    33WIFISTAT43FX
    Manufacturer Item:
    33WIFISTAT43FX
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    TXV Conversion Kit R410A 1.5-2.5 Ton

    International Comfort Products Fast Parts NAEB40501TX TXV Conversion Kit R410A 1.5-2.5 Ton,
    ,

    Item#:
    NAEB40501TX
    Manufacturer Item:
    NAEB40501TX
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Uncased Vertical Coil kit 3 Ton Up-Flow/Down-Flow


    Item#:
    NAVA43601CK
    Manufacturer Item:
    NAVA43601CK
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    Up To 92.1% Standard NOX Gas Heating Furnace 35" H x 14-3/16" W x 29-1/2" D

  • Up to 92.1% AFUE in upflow, horizontal, and downflow positions
  • Single-stage gas valve and fixed-speeds, constant torque ECM.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Approved for Manufactured Housing/Mobile Home applications with accessory (order separately)
  • NOx emissions less than 40 ng/J; can be installed in California air quality management districts with a 40 ng/J NOx emission limit.
  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride ignitor
  • High quality, corrosion-resistant, prepainted steel cabinet

    • Item#:
    R92ESN0401410A
    Manufacturer Item:
    R92ESN0401410A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R92ESN-ICP-Warranty_Misc
    R92ESN-ICP_Install
    R92ESN-ICP_Spec

    Up To 92.1% Standard NOX Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 92.1% AFUE in upflow, horizontal, and downflow positions
  • Single-stage gas valve and fixed-speeds, constant torque ECM.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Approved for Manufactured Housing/Mobile Home applications with accessory (order separately)
  • NOx emissions less than 40 ng/J; can be installed in California air quality management districts with a 40 ng/J NOx emission limit.
  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride ignitor
  • High quality, corrosion-resistant, prepainted steel cabinet

    • Item#:
    R92ESN0801716A
    Manufacturer Item:
    R92ESN0801716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R92ESN-ICP-Warranty_Misc
    R92ESN-ICP_Install
    R92ESN-ICP_Spec

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 24-1/2" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products N92MSN1202420A

    • Item#:
    N92MSN1202420A
    Manufacturer Item:
    N92MSN1202420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products N92MSN0801716A

    • Item#:
    N92MSN0801716A
    Manufacturer Item:
    N92MSN0801716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products N92MSN0401712A

    • Item#:
    N92MSN0401712A
    Manufacturer Item:
    N92MSN0401712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 14-3/16" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products N92MSN0601412A

    • Item#:
    N92MSN0601412A
    Manufacturer Item:
    N92MSN0601412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install
    |◀ ◀ 1069 - 1080 of 1132 ▶ ▶|
    View: