Includes fixed 1/4" male quick-connects or color-coded lead wires for primary and secondary connections
• Includes metal end bells and button for manually resetting the breaker, 1/2-14 NPSM conduit connector and lock nut for mounting
  
  

  HONEYWELL AT150F1022

Includes button for manually resetting the circuit breaker and metal end bells
• Includes 1/2 (14) NPSM conduit connector and lock nut for mounting on plate or panel (not included) with 7/8" knockout and feet for surface mount
  
  

  HONEYWELL AT150F1030

2-way on-off low Voltage valves consist of an actuator and valve assembly for controlling the flow of hot water
• Manual opener for valve operation on power failure, valve returns to automatic position when power is restored
• All model may be installed without disassembling the valve
• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
• 15 sec nominal open timing
• Screw terminal block electric connection
• Spring return to close valve action
• No SPST auxiliary end switch
• 50 VA pilot duty at 24 VAC , 4.4 amp running with 26.4 amp inrush at 120 VAC end switch rating
• Buna-N (NBR) rubber plug
• Manual opener
  
  

  HONEYWELL B163-5

2-way on-off low Voltage valves consist of an actuator and valve assembly for controlling the flow of hot water
• Manual opener for valve operation on power failure, valve returns to automatic position when power is restored
• All model may be installed without disassembling the valve
• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• The valve can be mounted in any position on a vertical line
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
• 15 sec nominal open timing
• Screw terminal block electric connection
• Spring return to close valve action
• No SPST auxiliary end switch
• 50 VA pilot duty at 24 VAC , 4.4 amp running with 26.4 amp inrush at 120 VAC end switch rating
• Buna-N (NBR) rubber plug
• Brass case, sector gears, stainless steel cover actuator
  
  

  HONEYWELL B163-4

Valves with action of spring return to close
• 4.4 amp running at 120 VAC , 50 VA pilot duty at 24 VAC auxiliary switch
  
  

  HONEYWELL B163-7

2-way on-off low Voltage valves consist of an actuator and valve assembly for controlling the flow of hot water
• Manual opener for valve operation on power failure, valve returns to automatic position when power is restored
• All model may be installed without disassembling the valve
• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
• 15 sec nominal open timing
• Screw terminal block electric connection
• Spring return to close valve action
• No SPST auxiliary end switch
• 50 VA pilot duty at 24 VAC , 4.4 amp running with 26.4 amp inrush at 120 VAC end switch rating
• Buna-N (NBR) rubber plug
  
  

  HONEYWELL B163-6

HONEYWELL B163-1

HONEYWELL B163-3

HONEYWELL B163-2

On-off low Voltage valves consist of an actuator and valve assembly for controlling the flow of hot water
• Manual opener for valve operation on power failure, valve returns to automatic position when power is restored
• All models may be installed without disassembling the valve
• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
• 15 sec open time
• 18" lead electric connection
• Spring return to close valve action
• 50 VA pilot duty at 24 VAC , 4.4 amp running with 26.4 amp inrush at 120 VAC end switch rating
• NO SPST auxillary end switch
• Buna-N (NBR) rubber ball plug/ball/disc material
• EPDM rubber packing material
• Mounted in any position on a vertical line
  
  

  B163

Honeywell CPRD8

Honeywell CHW3610W1001