• Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
• Solid state flame sensing circuit
• LED on terminal strip indicates system lockout
• Remote lockout indication
• Enclosed safety switch with external reset button
• Manual trip lever opens safety switch for system maintenance
• Mounts on standard 4 x 4" junction box
• C554A cadmium sulfide flame detector and 24 VAC thermostat required
• With 15 sec safety timing, alarm outputs and manual safety switch

• Operates the oil burner and oil valve (if desired) in response to a call for heat from a low voltage control circuit
• Intermittent ignition is on while the burner is on
• Solid state flame sensing circuit
• External button to manually reset safety switch after lockout
• Enclosed safety switch must be manually reset after safety shutdown
• R8184M includes 40 VA transformer and Y and G terminals for connection of cooling equipment
• Mounts on standard 4 x 4" junction box
• C554A cadmium sulfide flame detector and 24 VAC thermostat required

• With 45 sec safety timing and alarm outputs
• Provides automatic, nonrecycling control of an intermittent ignition oil burner system
• Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
• Solid state flame sensing circuit
• Enclosed safety switch with external reset button
• Manual trip lever opens safety switch for system maintenance
• Mounts on standard 4 x 4" junction box, select models may be mounted directly on burner housing
• C554A cadmium sulfide flame detector and 24 VAC thermostat required
• 75 VA at 120/240 VAC, 50-60 Hz, 25 VA at 24V, 50-60 Hz alarm load ratings(pilot duty)

• Provides automatic, non-recycling control of an intermittent ignition oil burner system
• Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
• Solid state flame sensing circuit
• LED on terminal strip indicates system lockout
• Remote lockout indication
• Enclosed safety switch with external reset button
• Manual trip lever opens safety switch for system maintenance
• Mounts on standard 4 x 4" junction box (select models may be mounted directly on burner housing)
• C554A cadmium sulfide flame detector and 24 volts thermostat required
• 15 second safety timing, alarm outputs, and manual safety switch
• Intermittent ignition timing

Resideo 390686-36

• Mechanical visual position indicator for damper status
• Solid construction using extruded aluminum frame and blades
• Parallel blade design for low leakage performance
• Simple, easy-to wire, two wire installation with a third wire option M4 for LED open only light
• Reliable, strong, 24 volt spring return motor
• Fail-safe, normally open operation
• Ordering instructions: order ZD (dimensions 1) x (dimensions 2), (motor is always mounted on dimensions 2 side) for example, ZD10x8 is a 10 x 8 Inch damper with the motor on the 8 Inch side, but a ZD8x10 is an 8 x 10 Inch damper that has the motor on the 10 Inch side
• Damper can be installed in any orientation (mounting side can be on either the bottom or the side of the duct)
• Motor or actuators mounting - side or top
• 30 sec power closed/10 sec spring return
• 90 deg angular rotation Honeywell Home TrueZone ZD Residential Damper, 10 x 12 Inch, Rectangular, 24 VAC, 0.32 amp, 90 deg Rotation, Import,
  ,