Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

JB Industries CLS-60B High Pressure Refrigerant Charging Hose 1/4" 60" L 800 psi Blue HOSE,CHARGE,BLUE,W/SEAL,5',
,

JB Industries Kobra CLS-60R High Pressure Refrigerant Charging Hose, 1/4 CLS series hoses feature a secure seal fitting that opens to full flow. The revolutionary patent-pending design on our internal structure significantly reduces blowouts, provides maximum flow and automatically traps refrigerant discharge in the hose. The gasket features a hood with a straight edge that snaps into the straight edge of the barb. This straight edge to straight edge force eliminates gasket blowouts. The depressor is barbed and locks into the gasket, meaning the outward force on the depressor pushes the gasket further into place, resulting in no blowouts. JB also uses a common crimp that grips the full circumference of the hose yielding a maximum hold and uniform seal that prevents leaks and bursts. Kobra high pressure hoses are made from Kevlar - the same material that stops bullets in bullet-proof vests. This provides a 5 - 1 safety factor (better than the industry standard of 4 - 1). Kevlar makes our hoses incredibly strong and flexible. Kobra hoses feature a nitrile cover which is better than neoprene because it is more resistant to oil, giving the hoses a longer life.Sid Harvey Item #:CLS-60R: Replaces Part #:'s : 22260,
,

JB Industries Kobra CLS-60Y High Pressure Charging Hose, 1/4" Female, 60" L, 800 psi, Yellow

• Opens to full flow
• 5 to 1 safety factor
• Stainless steel thrust washer insures free rotation even under high pressure
• 3-point contact on depressor
• Secure seal fitting
• Automatically traps refrigerant

,
,

JB Industries Kobra CCLS-72 High Pressure Charging Hose Set, 1/4" FNPT, 72" L, 800 psi, Red/Blue/Yellow

• 5 to 1 safety factor
• Rebuildable
• Opens to full flow
• Stainless steel thrust washer insures free rotation even under high pressure
• 3-point contact on depressor
• Low loss fitting adapters available
• These hoses are suitable for R-410A and can be used with all common refrigerants except ammonia
• JB also uses a common crimp that grips the full circumference of the hose yielding a maximum hold and uniform seal that prevents leaks and bursts
• Kobra hoses feature a nitrile cover which is better than neoprene because it is more resistant to oil, giving the hoses a longer life
• Use P90022 as replacement o-ring

,
,

JB Industries M2-825 Steel Case High Side Manifold Pressure Gauge, 3-1/8 JB offers 3-1/8" (80 mm) illuminated gauge. The glow-in-the-dark dials store energy to emit light in dimly lit or dark applications. The R-410A only gauges are not glow-in-the-dark due to their pink dial. The illuminated large gauges are also available with 1% accuracy rating. Gauges are sensitive instruments and should not be subjected to pressures beyond scale.Sid Harvey Item #:M2-825: Replaces Part #:'s : 422-CB,
,

JB Industries QC-G465 High Side Individual Quick Connect Test Gauge, 2-1/2,
,

JB Industries PR-315 Intake Trap O-Ring After Jan 2001,
,

JB Industries DV-T1 JB Industries Vacuum Pump Oil Caddy,

,

JB Industries Kobra CCLV-6 Kevlar High Pressure Charging Hose Set with CLV-6 series hoses feature a ball valve 6" whip end with ball valve that opens to full flow. These can be used as replacements for the CLV Kobra high pressure series or to connect to other hose fittings. Our patent pending design of the fittings features a hood that locks the gasket into the fitting with a straight edge to straight edge force that eliminates the blowout of the gasket. The barbed depressor locks into the gasket, exuding more outward force and pushing the gasket further into place. This depressor is precisely machined for maximum flow and has a dimple that guides the valve core into place. Kobra high pressure hoses are made from Kevlar - the same material that stops bullets in bullet-proof vests. Kevlar makes our hoses strong and flexible, while the nitrile cover extends the life of the hoses better than neoprene. Kobra hoses are made in the USA.,
,

JB Industries Kobra CCLV-48 High Pressure Charging Hose Set, 1/4, 48" L, 800 psi, Red/Blue/Yellow

• 5 to 1 safety factor
• 1/4 turn lever style ball valve on 6" whip end
• Use rebuild kit 90514
• Use P511 as a replacement gasket
• Use P90514 as replacement depressor

,
,

JB Industries Kobra CCLV-72 High Pressure Charging Hose Set, 1/4, 72" L, 800 psi, Red/Blue/Yellow

• 5 to 1 safety factor
• 1/4 turn lever style ball valve on 6" whip end
• Use rebuild kit 90514
• Use P511 as a replacement gasket
• Use P90514 as replacement depressor

,
,

JB Industries Kobra CCLV-60 Kevlar High Pressure Charging Hose Set with CLV series hoses feature a ball valve 6" whip end that opens to full flow. Our patent pending design of the fittings features a hood that locks the gasket into the fitting with a straight edge to straight edge force that eliminates the blowout of the gasket. The barbed depressor locks into the gasket, exuding more outward force and pushing the gasket further into place. This depressor is precisely machined for maximum flow and has a dimple that guides the valve core into place. Kobra high pressure hoses are made from Kevlar - the same material that stops bullets in bullet-proof vests. Kevlar makes our hoses strong and flexible, while the nitrile cover extends the life of the hoses better than neoprene. Kobra hoses are made in the USA.Sid Harvey Item #:CCLV-60: Replaces Part #:'s : 41326,
,