Johnson Controls V246GD1-001C Water Regulating Valve

• 1" FPT,
  ,
  
  
  
  

  Johnson Controls V246GB1-001C

Johnson Controls A70GA-1 Temperature Control Two Circuit 1-55 Degree Four Wire 20' Capillary
,
,

Johnson Controls A421GBF-02

The P70 Controls for low pressure applications are designed primarily for low pressure cut-out control, pump-down control, and capacity control on commercial refrigeration and air conditioning applications. These controls are available in several pressure ranges and are compatible with most common refrigerants. They may also be used on other non-corrosive fluid applications. Ammonia-compatible models are also available.

• All-steel case and cover built to provide long lasting, rugged protection for internal components
• Sight-set calibrated pressure adjustment - displays a visible pressure scale, fully adjustable through the range without removing the cover
• NEMA 1 enclosure, no adjustment knob
• Ammonia compatible

,
,

Johnson Controls P70AA-400C

Johnson Controls P170AA-400C Steel Automatic Reset High Pressure Controller, 690 psig, 4" W x 3-1/4" H x 2-1/16" D

Johnson Controls P145NCB-12C

Johnson Controls SEC99AB-24 Armored Capillary, 0.060" ID x 24" L Straight & 90 Degree

JB Industries 25240

Johnson Controls A19DAC-1 Gray Baked Enamel Cold Rolled Steel Hot Water Johnson Controls A19 series temperature controls are designed to cover a broad range of uses for heating and general purpose requirements. Controls have SPST contacts which open on temperature increase or they may be supplied in SPDT contact action. Various control ranges are available to cover working temperatures from -30 to 550 deg F. Closed tank fittings and bulb wells are available for immersion applications. These controls are designed for open low and open high applications. Where critical or high value products are to be maintained within a specific temperature differential, a 1-control should not be applied to function as both an open low and open high control. In these applications, a separate backup control with alarm contacts should be wired to indicate when the back-up control operates.,
,

Johnson Controls A19DAC-1

Johnson Controls C878-36 Low Pressure Control SPST 1/4" Male Flare Auto Rest 12"Hg/80 PSI,

Johnson Controls C878-33

Johnson Controls A19AAF-12 Temperature Control 25-225 Degrees SPDT 10' Capillary
,
,

Johnson Controls A19AAD-12

A11 Series low temperature cutout controls are available with Single-Pole, Double-Throw (SPDT) or Single-Pole, Single-Throw (SPST) contact action. Typical applications include the sensing of low temperature conditions to avoid overcooling or icing of hydronic coils, cooling coils, and liquid handling pipes. The controls are compact and sturdy, and have an adjustable temperature setpoint range with a fixed differential. The range adjustment screw is accessible at the bottom of the control, and at the top of the control when the cover is removed

A11B-1C

2-Stage Temperature Control 2-SPDT -30-100 F

Johnson Controls A11A-1 Freeze Stat 35-45 Degrees Manual Reset 20' Capillary
,
,

Johnson Controls A11A-1

Johnson Controls A421GBF-02 Low-voltage Type 1 Electronic Temperature Control: Type 1 (NEMA), IP20 standard enclosure for DIN rail and surface-mount applications. Rated for 24 VAC Class 2, safety extra low voltage. Includes an A99BB-200C temperature sensor with 6.6 ft (2.0 m) cable.

Johnson Controls A421ABC-02C