Malco TS1RB Trubo-Shear Replacement Blade,
,

TS1RB

TS1RB

The time-saving Turboshear model number TS1 inserts directly into the chuck of a standard 1200 RPM A/C or cordless drill. Its that easy to convert your power drill to a power shear! This rugged but inexpensive accessory cuts straight and to the left and is capable of navigating tight curved patterns and squares in heavy 20-gauge (1.02 mm) Galvanized steel. Blind cuts require only a 1/2" starting hole. Cutting applications include both ferrous and non-ferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, ductwork, even the thick metal of furnace jackets, equipment enclosures or automotive body panels. An offset design keeps both hands away from work surface. Long-wearing hardened jaws are also replaceable. For premium performance without the premium price of a dedicated power shear, Turboshear is an easy addition to every tool bag.

• Inserts into chuck of A/C or cordless drill
• Offset design saves hands
• Navigates tight patterns and square cuts
• Cuts a variety of building materials
• Cut-away view
• Tsdc drill clamp (optional)
• Made in the U.S.A.

,
,

Malco TS1

Malco TS1

Malco TY4 Manual Nylon Tie Cut-Off Tool, 6" L, 175 lb

• Rugged lever action cut-off tensioning tie tool
• Features a unique notched gripper
• Comfortable handles reduce the p" point area
• Works on all ties including thin designs

Sid Harvey Item #:TY4: Replaces Part #:'s : 13513,
,

Malco TY4

Malco TY4

A unique thread design and quality controlled manufacture spell the Zip-In difference. Zip-In's sophisticated heat treat process allows the screw to taper to a fine, sharp point without sacrificing critical point strength. A single starting thread is formed down to the very tip of the point and is the source of Zip-In's penetrating power. A second thread above the point engages after initial penetration and drills in the screw double fast. Zip-In screws are faster driving, with a greater capacity for fastening heavier gauges of sheet metal than any other self-piercing type.

• Undercut-indented hex washer slotted head
• Burr free
• Full 1/4" (number 8) head will not strip out of hex driver opening
• (1) 1/4" hex driver accommodates all sizes
• Undercut - always seats flush
• Trademarked and patented head markings indicate 1 and only genuine zip-ins US patent number D524, 638
• Combination lead double thread design: single starting thread machined down to very tip of screw point, instantly penetrates and engages in heavy gauge sheet metal and layered light gauge
• Consistent hard point: quality controlled heat treat, sharp tapered point will not mushroom or break, no walking

Sid Harvey Item #:T473-4: Replaces Part #:'s : 11695,
,

Malco T473-4

A unique thread design and quality controlled manufacture spell the Zip-In difference. Zip-In`s sophisticated heat treat process allows the screw to taper to a fine, sharp point without sacrificing critical point strength. A single starting thread is formed down to the very tip of the point and is the source of Zip-In`s penetrating power. A second thread above the point engages after initial penetration and drills in the screw double fast. Zip-In screws are faster driving, with a greater capacity for fastening heavier gauges of sheet metal than any other self-piercing type.

• Head Size: 1/4"
• Length: 1/2"
• Number: 8
• Quantity: 1,000
• Package Type: Tub
• Single starting thread machined down to very tip of screw point
• Instantly penetrates and engages in heavy gauge sheet metal and layered light gauge
• Undercut-indented hex washer slotted head
• Zinc Plated
• Burr Fee
• Full 1/4" (no 8) head will not strip out of hex driver opening
• One 1/4" hex driver accommodates all sizes
• Undercut - always seats flush
• Quality controlled heat treat
• Sharp tapered point will not mushroom or break

Sid Harvey Item #:T473-2: Replaces Part #:'s : 13318,
,

Malco T473-2

A unique thread design and quality controlled manufacture spell the Zip-In difference. Zip-In's sophisticated heat treat process allows the screw to taper to a fine, sharp point without sacrificing critical point strength. A single starting thread is formed down to the very tip of the point and is the source of Zip-In's penetrating power. A second thread above the point engages after initial penetration and drills in the screw double fast. Zip-In screws are faster driving, with a greater capacity for fastening heavier gauges of sheet metal than any other self-piercing type.

• Head will not strip out of hex driver opening
• Undercut - always seats flush
• Burr free
• Patented head markings U.S. patent number D524638
• Sharp tapered point will not walk, mushroom or break Malco Zip-In HW8x3/4ZT Bright Zinc-Plated Steel Indented Hexagonal Washer Head Self Piercing Screw, #8 x 3", Slotted, 1000/PackSid Harvey Item #:T473-3: Replaces Part #:'s : 13328,
  ,
  

  Malco T473-3

A unique thread design and quality controlled manufacture spell the Zip-In difference. Zip-In's sophisticated heat treat process allows the screw to taper to a fine, sharp point without sacrificing critical point strength. A single starting thread is formed down to the very tip of the point and is the source of Zip-In's penetrating power. A second thread above the point engages after initial penetration and drills in the screw double fast. Zip-In screws are faster driving, with a greater capacity for fastening heavier gauges of sheet metal than any other self-piercing type.

• Head will not strip out of hex driver opening
• Undercut - always seats flush
• Burr free
• Patented head markings U.S. patent number D524638
• Sharp tapered point will not walk, mushroom or break Malco Zip-In HW7x1/2ZT Bright Zinc-Plated Steel Indented Hexagonal Washer Head Self Piercing Screw, #7 x 3", Slotted, 1000/PackSid Harvey Item #:T473-1: Replaces Part #:'s : 13309,
  ,
  

  Malco T473-1

Malco TY6 Nickel-Chrome Plated Steel High Leverage Tensioning Tool, 8-1/2" L

• Hardened steel stampings
• Tensioning adjustment knob
• Automatic cut-off mechanism The TY6 tensioning tool is designed for a heavy user of nylon ties. An adjustment knob allows installer to set desired tension for securing flex duct to a take-off collar. When the tie is tight, a breakaway spring mechanism releases the tool's lower handle, causing the blade to engage and automatically flush cut off the excess tail of the nylon tie. No extra operation for manual trimming is required. Nylon tie installation is fast and easy with the TY6. Works on all ties including thin designs.,
  ,
  
  
  
  

  Malco T397-309

  
  

  Malco T397-309

Malco precision fit and hardened magnetic hex chuck drivers, with 1/4" power insert shanks, meet on-the-job demands for performance and service life whether installed on a power drill or used with a Connect quick change handle. Hex driver sizes are color coded for easy identification and are available in shorts, longs and extra long sizes.

Sid Harvey Item #:T475-50: Replaces Part #:'s : 13384,
,

Malco T475-50

Malco T475-50

A unique thread design and quality controlled manufacture spell the Zip-In difference. Zip-In's sophisticated heat treat process allows the screw to taper to a fine, sharp point without sacrificing critical point strength. A single starting thread is formed down to the very tip of the point and is the source of Zip-In's penetrating power. A second thread above the point engages after initial penetration and drills in the screw double fast. Zip-In screws are faster driving, with a greater capacity for fastening heavier gauges of sheet metal than any other self-piercing type.

• Head will not strip out of hex driver opening
• Undercut - always seats flush
• Burr free
• Patented head markings U.S. patent number D524638
• Sharp tapered point will not walk, mushroom or break Malco Zip-In HW8x3/4Zx Bright Zinc-Plated Steel Indented Hexagonal Washer Head Self Piercing Screw, #8 x 3", Slotted, 100/Pack,
  ,
  

  Malco T473-16

Malco Zip-In HW8x1/2Zx Self-Piercing Sheet Metal Screw, Imperial, #8, Hex Washer Head, Slotted Drive, Zinc Plated

,
,

Malco T473-14