The Robertshaw 41-600 Series Hot Surface Mini-Ignitors deliver dependable ignition in all heating systems. The mini-ignitor's three-second heat-up time, in combination with its small size, have been embraced by gas furnace OEMs.

Robertshaw 41-603

The Robertshaw 1900 series thermocouples include either a special low-mass or quick dropout thermocouple. It is usually found on applications that require an oxygen depletion system on the thermo safety. It is also found on many LP gas applications that require a quick dropout of the thermo safety if there is a loss of pilot flame.

Robertshaw G364-43

Robertshaw Controls Solenoid Coil 24 VAC
,
,

C906-92A

Ranco Solenoid Reversing Valve Coil, 230 VAC

• Epoxy encapsulated
• Continuous duty
• Moisture resistant magnetic coils
• Includes wiring harness with 48" lead

,
,

LDK-410000-070

Ranco Solenoid Reversing Valve Coil, 24 VAC

• Epoxy encapsulated
• Continuous duty
• Moisture resistant magnetic coils
• Includes wiring harness with 48" lead

,
,

LDK-110000-070

The Robertshaw 720 series 24 volt dual gas valve is a 6-function gas valve incorporating a manual valve, safety shut-off magnet, dual automatic valves, main gas regulator, and pilot adjustment. Models are available with and without a pressure regulator. Uni-Kit models are factory set at 3.5" WC for natural gas, but can be converted to LP by installing the regulator conversion kit included. The wiring connections, manual selector and adjustments are easily accessible on top of the valve. With a 3-9/16" swing radius, the 720 series lends itself well to replacing many OEM valves. Valve can be mounted in any position except upside down. The 720 series feature an integral manual selector used to select from the 4 gas flow positions - off, on, pilot and set. The set position provides pilot only gas flow during magnet energizing and lock up. Built-in stops serve to prevent accidental setting to the off position.

Robertshaw G648-8

The Robertshaw 720 Series 24 V Dual Gas Valve is a six-function gas valve incorporating a manual valve, safety shut-off magnet, dual automatic valves, main gas regulator, and pilot adjustment. Models are available with and without a pressure regulator. Uni-Kit models are factory set at 3.5 in WC for natural gas, but can be converted to LP by installing the regulator conversion kit included. The wiring connections, manual selector and adjustments are easily accessible on top of the valve. With a 3-9/16 in swing radius, the 720 Series lends itself well to replacing many OEM valves. Valve can be mounted in any position except upside down.

• Gas cock dial marking off-pilot-on
• Pilot outlet 1/4" tubing
• Combination screw/spade terminal type
• 50/60 Hz frequency
• Standard NEMA terminals
• Inlet filtered screen
• Various gas types - natural, manufactured, mixed, LP and LP/air mixtures
• Multiple actuators
• Uni-Kit natural gas pressure regulation
• (1) 3/4 x 1/2" NPT reducer bushing
• 1/2" FPT side outlets with plugs
• Factory part number 7200ER

Sid Harvey Item #:G648-9: Replaces Part #:'s : A-15691-335,
,

G648-9

Robertshaw Controls C901-60 Temperature Control SPST 0/55 Degrees SPST,
,

C901-60

Ranco Invensys A30-1769 Temperature Control, -19.5 deg F Warm Cut-In, 5 deg F Cold Cut-Out, 240 VAC, 36" Capillary Length

• Shaft reset
• Tin capillary style
• 2-3/16" mounting center

,
,

Ranco A30-1769

Ranco A30-3618 Constant Differential Constant Cut-In Temperature Control,Sid Harvey Item #:A30-3618: Replaces Part #:'s : 502-014A | 502014A |,

,

Ranco A30-3618

Robertshaw Controls TC-900E-2HP Temperature Control 115/230 VAC

TC-900E-2HP

Robertshaw Controls C904-49 Temperature Control
,
,

C904-49