Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

Skuttle 24X10-BB Boot 24" x 10"

Skuttle 2001 Thermoplastic High Capacity Flow-Through By-Pass Humidifier, 18 Gallon/day, 24 VAC, 15652 - 34286 cu-feet

• Compact width fits plenums as narrow as 14"
• Low profile makes units ideal where space is limited
• Shut-off damper reduces airflow in summer allowing air conditioner to run more efficiently and economically
• Reversible side panels permit left or right side bypass installation
• Superior patented wicking and water distribution system accommodates non-level plenums
• Frameless evaporator pad avoids breakage common to brands with plastic frames
• Internal solenoid resists damage from bumping
• Stainless steel orifice won't break and cleans easily
• Thermoplastic cabinet resists rust, corrosion and warpage
• Barbed drain fitting prevents hose from slipping
• Energy-efficient technology uses minimal water and electricity
• 6" diameter bypass opening
• 1/4" outside diameter copper water supply tubing
• 1/2" inside diameter water drain tubing
• 9-7/8" width x 16-5/8" height x 1-9/16" depth evaporator pad
• 6.26 lb/hr at 120 deg F
• Upflow, downflow, horizontal installations
• Extended 5 years limited warranty

Sid Harvey Item #:2001: Replaces Part #:'s : 5H506,
,

Skuttle A04-1725-010 Coated Aluminum Humidifier Filter 10-3/4" W x 10-1/2" H x 1-1/2" T,
,

Skuttle A17-1731-013 Complete Valve and Float Assembly for 86-UD Under Duct Drum Humidifiers

• Replaces the B-48 valve and the A-1309-5 float with a high quality stainless steel nozzle
• Valve washer, valve retaining nut and compression fittings accessories, B48-0000-000 valve, A00-1309-005 float and A00-1708-002 seat included
• 5" float ball length
• Instructions includes

Sid Harvey Item #:A17-1731-013: Replaces Part #:'s : L26-12 | L26-22 |

Skuttle A50 Current Sensing Relay, 24 VAC

• This relay is engineered for safety with a protective rubber guard separating the current-bearing wire from the steel bracket and is easy to install
• Use of this device does not invalidate an existing equipment warranty
• Activates or controls electrically-activated humidifiers, make-up air controls, air cleaners, zone dampers and more
• Can be installed on any 120/240 VAC multispeed blower to coordinate operation of the HVAC accessory with the furnace
• Engineered for safety-protective rubber guard separates current-bearing wire from steel bracket/does not invalidate existing equipment warranty
• Easy to wire and install

Skuttle A05-1721-042 Drum Motor, 24 VAC , 1 RPM

• Included accessories mounting hardware, mounting template

Sid Harvey Item #:L26-16: Replaces Part #:'s : 5G1451

Skuttle duct-mounted steam humidifiers are the best option when stabilized humidity is desired or essential. They work well on all heating systems with air movers and are particularly effective on furnaces that dont operate long enough or generate enough heat for other humidifiers to work efficiently.

• The Skuttle 60-2 humidifier is a whole house steam humidifier designed to be installed on a forced air heating system for a home or office
• Maximum humidifier efficiency depends upon the tightness of your home, the hardness of your water and a variety of external factors

Sid Harvey Item #:60-2: Replaces Part #:'s : 5H5271,
,

Skuttle A01-1722-018 Foam Pad and Plastic Drum Complete Drum and Media Assembly for Model 45 Humidifier

• 7" width pad
• 6-1/8" outside diameter drum end
• 8-1/2" length shaft

Sid Harvey Item #:L31-46: Replaces Part #:'s : 19537,
,

Skuttle A01-1722-020 Foam Pad and Plastic Drum Complete Drum and Media Assembly for Model 90 Humidifier

• 7-3/4" width pad
• 8" outside diameter drum end
• 10" length shaft

,
,

Skuttle A04-1725-045 Foam with Mesh Exterior Humidifier Filter, 11" W x 12-3/4" H x 1-3/4" T

• Inside the humidifier, this rotating evaporator pad lifts water from the water pan into the air stream

Skuttle F60-2 316 Stainless Steel High Capacity Automatic Flushing Timer Steam Humidifier, 17 Gallon/day, 240 volt, 8.3 amp, 4048 sq-feet

• Corrosion resistant, low-water cutoff switch and built-in overflow protection provide peace of mind
• Energy efficient technology uses minimal water
• A longer, reconfigured heating element, which decreases watt density and reduces premature burnout
• An extended, 2 year warranty on the heating element
• A safety control shut-off to prevent the humidifier from operating if the furnace blower fails
• A mounting bracket that serves as a fixed template and creates a drawer-like frame on the ductwork for easy installation and service
• A 3/8" barbed, brass overflow fitting for fast, secure tubing installation
• A 316 stainless steel float to provide improved corrosion resistance
• Thermal fan interlock control allows unit to provide humidity independent of the furnace's heating cycle ideal when stabilized humidity is critical
• 1-piece service drain petcock makes cleaning easy
• Wattage: 2 kW

Sid Harvey Item #:F60-2: Replaces Part #:'s : 5H521,
,

Skuttle DB-20-16 High Capacity High Efficiency Air Cleaner 21-1/8 x 18-3/4 x 6-1/2" 600-1200 CFM
Skuttle duct-mounted air cleaners capture most of these contaminants in a deep-pleated, fluffier filter, which traps far more particulates over a longer period than standard, flat-filter designs. The results are cleaner indoor air, longer filter life, a cleaner HVAC system, longer furnace life, significant cost savings over time and a healthier living environment. Among the most cost-efficient air cleaners on the market, Skuttles High-Efficiency Air Cleaners are designed to provide peak, whole-house air filtration, helping to make your home cleaner, healthier and safer for you and your family. Skuttle Air Cleaners are duct-mounted, high-capacity air filters designed to provide high-level air filtration in todays energy-efficient homes. The Air Cleaner is easily installed; filter cartridges slide in and out for quick, easy replacement.

• High efficiency, high-capacity filtration with minimal airflow resistance for longer furnace life
• A sturdy, 20 ga, zinc-coated steel cabinet backed by a 10 years warranty
• A tough, stylish thermoplastic door to dress up any installation
• A reminder dial to tell homeowners when it's time to check the media for possible replacement
• Pre-punched drill and access holes in the frame for faster, easier installation
• Dependable, high-quality products made in the USA,