S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Superior Filtration Products 10x10x1ECON MERV 8 Economy Pleated Disposable Air Filter Die-Cut Frame, Pleated in V-Radius Wedges, Cotton/Synthetic Media
NovaCell 2 filters by Superior Filtration Products are a pleated, high efficiency, MERV rated media filter designed for use in most commercial, industrial, and specialty installations with minimal or no modification to the existing system.
NovaCell 2 filters by Superior Filtration Products are a pleated, high efficiency, MERV rated media filter designed for use in most commercial, industrial, and specialty installations with minimal or no modification to the existing system.
- V-radius wedge pleat for maximum holding capacity
- Die-cut, 2-piece frame providing maximum strength and durability with a double wall heavy-duty high wet strength beverage board
- The filter media is bonded to the frame on all sides
- Adhesive bonding seal prevents air bypass for the efficiency of the filter as well as supports pleat spacing for even dust loading
- Stabilizer face grids bonded to the front and back of the pleats for durability and pleat stabilization
- The quality of construction of the Super Cell air filter will maintain its durability and integrity during installation and operation under normal conditions
Item#:
18X24X4
Manufacturer Item:
18X24X4PL
Manufacturer:
AIR FILTERS
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
Purolator FME40 Standard Capacity Pleated Air Filter, 16 x 24 x 1"
- Medium efficiency
- Excellent pre-filter or stand-alone filter
Item#:
16X24X1 FME40
Manufacturer Item:
FME40-16X24X1
Manufacturer:
AIR FILTERS
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
Item#:
16-3/4X23-3/4X1PL
Manufacturer Item:
ZLPSP16M23M1
Manufacturer:
AIR FILTERS
The Hi-E 40 is a medium efficiency pleated filter, available in 2" depth and several standard face sizes to accommodate most system requirements. The 100% hydrophobic synthetic media provides 35-40% average efficiency and nearly 95% average arrestance. The Hi-E 40 is effective as a stand-alone filter or prefilter.
- Filters are made with 100% synthetic fibers providing mechanical efficiency to achieve a MERV 10 performance
- Media has polyvinyl acetate (PVA) adhesive that is not affected by mold or microbial growth
- Heavy duty beverage board frame - moisture resistant, sturdy frame material stands up to rough handling and difficult service conditions, providing long service life
- 2-piece frame construction - double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity
- Water repellent adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent
- Galvanized steel pleat support
- Stronger adhesive with more bonding points
- Lower initial resistance for energy saving
- Medium efficiency pleated filter
- Made in USA
Item#:
18X18X2 PL
Manufacturer Item:
HE40-18X18X2
Manufacturer:
AIR FILTERS
The Hi-E 40 is a medium efficiency pleated filter, available in 2" depth and several standard face sizes to accommodate most system requirements. The 100% hydrophobic synthetic media provides 35-40% average efficiency and nearly 95% average arrestance. The Hi-E 40 is effective as a stand-alone filter or prefilter.
- Filters are made with 100% synthetic fibers providing mechanical efficiency to achieve a MERV 10 performance
- Media has polyvinyl acetate (PVA) adhesive that is not affected by mold or microbial growth
- Heavy duty beverage board frame - moisture resistant, sturdy frame material stands up to rough handling and difficult service conditions, providing long service life
- 2-piece frame construction - double wall thickness around the outer edge and integral die cut cross members provide strength and rigidity
- Water repellent adhesive used to bond the frame and media pack into a unitized assembly is highly water repellent
- Galvanized steel pleat support
- Stronger adhesive with more bonding points
- Lower initial resistance for energy saving
- Medium efficiency pleated filter
- Made in USA
Item#:
16X16X2PL
Manufacturer Item:
HE40-16X16X2
Manufacturer:
AIR FILTERS
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
Item#:
18X18X2STD
Manufacturer Item:
DPM7-18X18X2
Manufacturer:
AIR FILTERS
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles
How often do I need to change my air filter?
There are many factors that can determine when an air filter should be changed. How often the HVAC unit runs, air quality, humidity and other factors can vary greatly from application to application. For most 1, 2 and 4 deep panel or pleated style filters, it is usually recommended to change the filter every 2-3 months. In many commercial and industrial applications static pressure can be monitored and the filters can be changed when they reach their recommended final resistance in inches of water gauge.
What is MERV?
MERV stands for: Minimum Efficiency Reporting Value. MERV is part of the ASHRAE 52.2 Test Standard that determines the ability of an air filter to remove particles of a specific size from an air stream. Air filters can have a MERV of 1 to 16; the higher the MERV, the more efficient the filter is at capturing particles