Both Stay Brite and Stay Brite 8 produce an overall component with greater strength than a brazed component whose base metals are weakened by annealment from high brazing heat. Stay Brite solders bond with all of the ferrous and nonferrous alloys. Joints soldered with Stay Brite solders exhibit considerably higher than necessary elongation for sound, dissimilar metal joints and vibration applications.

Sid Harvey Item #:T720-12: Replaces Part #:'s : 15207,
,

Mueller Copper W11-61

Stay Brite solders bond with all of the ferrous and nonferrous alloys. Joints soldered with Stay Brite solders exhibit considerably higher than necessary elongation for sound, dissimilar metal joints and vibration applications. Both Stay Brite and Stay Brite 8 produce an overall component with greater strength than a brazed component whose base metals are weakened by annealment from high brazing heat.

• 14000 psi tensile strength
• 10600 psi shear strength
• Bright silver color
• 430 deg F solidus and liquids temperature
• 48% elongation
• 16.4 electrical conductivity
• Lead free Harris Stay Brite SB61 Lead free Solder Wire, 1/8", 450 deg F, 1 lb Spool, Silver/Tin,
  ,
  
  
  
  

  Mueller Copper W11-60

Harris T720-50 A general purpose zinc chloride flux for soldering with all soft solders use with tin-lead solder, tin-antimony solder, Stay-Brite solder.

• Not recommended for use in electrical or electronic applications
• Fumes and gases and vapors can be hazardous to your health
• Flux is corrosive, may be harmful or fatal if inhaled or swallowed
• Flux causes skin and eye burns
• Do not taste or swallow
• Keep out of the reach of children
• Heat rays, (infrared radiation) from flame or hot metal can injure eyes

Sid Harvey Item #:T720-50: Replaces Part #:'s : 14951,
,

Mueller Copper W11-80

Harris Stay-Clean SCLF16 Clear to Slightly Yellow General Purpose Soldering Flux, 16 oz, Plastic Bottle

• A general purpose zinc chloride flux for soldering with all soft solders use with tin-lead solder, tin-antimony solder, Stay-Brite solder Harris Stay-Clean SCLF16 Clear to Slightly Yellow General Purpose Soldering Flux, 16 oz, Plastic BottleSid Harvey Item #:T720-51: Replaces Part #:'s : 10921,
  ,
  
  
  
  

  Mueller Copper W11-81

Harris T720-54 An all-purpose, low-temperature flux for use in silver brazing. Use with most ferrous and non ferrous metals, not recommended on aluminum, magnesium, and titanium.

• Flux may be water thinned but care should be taken to avoid excess dilution
• Flux turns clear, (transparent), close to brazing application temperature
• Burns eyes and skin can be fatal if swallowed
• Fukes and gases can be hazardous to your health
• Heat rays, (infrared radiation) from flame or hot metal can injure eyes Harris Stay-Silv SSWF Flux, 6.5 oz, Brush Cap Bottle,
  ,
  
  
  
  

  Mueller Copper W11-83

Harris T720-53 Soldering Flux 32 oz Bottle,
,

Mueller Copper W11-82

Lead free solder widely used in plumbing applications where lead-bearing solders are prohibited. Contains nickel, making joints tremendously strong. Wide range makes bridgit an excellent alloy for large diameter fittings and ill-fitted or non-concentric pipes. Fills gaps and caps off easily and effectively.

Sid Harvey Item #:T720: Replaces Part #:'s : 15204,
,

Harris T720

Designed primarily for copper to copper and copper to brass connections the paste form is ideal for soldering tube joints. Not recommended for electrical or electronic applications due to the potential corrosive residue of the flux. Stay Clean paste flux works well with most leaded and lead-free solder compositions. Flux residue should be removed after soldering.

Sid Harvey Item #:T720-25A: Replaces Part #:'s : 14954,
,

Mueller Copper W11-78

Harris T720-24E All-Braz Solder Kit,
,

Harris T720-24

With some exceptions, these tin-lead solders can be used to join copper and most copper alloys, lead, nickel alloys and steel. Tin-lead solders are not recommended for joints subject to high stress or vibration in the cooling industry due to lack of sufficient elongation properties. These solders are also available with rosin or acid core.

• It is illeGallon to use lead solders in both public and private potable water systems
• Lead-bearing solders are not to be used in potable water systems
• 360 deg F solidus
• Black color

Sid Harvey Item #:T720-5: Replaces Part #:'s : 15200,

,

Mueller Copper W11-79

Harris Stay-Clean SCAF4 Amber Aluminum Soldering Flux, 4 oz, Bottle

• A liquid flux for use with aluminum soldering
• Works to join aluminum to dissimilar metals Harris Stay-Clean SCAF4 Amber Aluminum Soldering Flux, 4 oz, Bottle,
  ,
  
  
  
  

  Harris T720-60

Nokorode regular paste flux is a lead free, all purpose, soft soldering paste flux ideal for use with 95/5 and other common solders. Nokorode special oil base protects the solder joint against corrosive attack. It cleans and fluxes all at one time. When heated, it reduces surface tension and allows the solder to flow easily and uniformly into the joint. Nokorode regular paste flux works to deliver a strong, leak free joint. It's non­aggressive formula is ideal when used on copper and brass fittings.

• Will not freeze or decompose
• No odor, lead free

,
,

Mueller Copper W11-87