CABLE DRIVE Assembly for the M18 Drum Machine (48-53-2816) provides you with the ability to automatically feed and retract cables through 1-1/4 to 4 lines at up to 15-20 feet per minute. The ratcheting lever automatically adjusts for our 3/8" and 1/2" inner core drain cleaning cables. The RAPID STOP release of the steel bearings provides a quick way to release the cable once the blockage is reached, preventing the cable from binding. The twist-lock feature allows the CABLE DRIVE Assembly to be easily swapped between your drums for maximum efficiency.

47-53-2816

Drum w/ Anchor Cable for M18 Drum Machine (47-53-2817) gives drain technicians increased versatility to have multiple sized cables for tackling clogs in 1-1/2-4 drain lines. The Drum w/ Anchor Cable for M18 Drum Machine can hold up to 100 of 3/8 Inner Core Cable and up to 75 of 1/2 Inner Core Cable. The 3/8" cable is best for use on 1-1/2"- 3" drain lines and 1/2" cable is best for use on 3-4" drain lines. Our Drum w/ Anchor Cable for M18 Drum Machine is also compatible with our CABLE DRIVE Assembly (47-53-2816) that allows you to automatically feed and retract cable up to 15-20 feet per minute. Cable sizes available are 3/8" x 75' (48-53-2776), 3/8" x 100' (48-53-2777) and 1/2" x 75' (48-53-2778).

47-53-2817

The multi-pick tool features a double-ended precision screwdriver with Phillips and slotted heads along with a pick and spudger. This 4IN1 Multi-Pick Tool allows you to perform all 4 applications with the same tool, minimizing the amount of additional tools needed for a job.

48-22-2145

Milwaukee® Selfeed drill bits deliver speed and endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, Selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee Selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these Selfeed bits are resharpenable so you can keep them cutting like new. Two feed screws are included.

48-25-1252

Milwaukee Tools 48-22-6208 Comfort Grip Hex-Jaw Pliers 8"

48-22-6208

48-22-6208

Milwaukee Tool 48-22-9716 Tape Measure 16",

Milwaukee Tools 48-22-9716

Milwaukee Tools 48-22-9716

M/2 2-Cutter SDS Plus Rotary Hammer-Drill bits are up to 30% faster with up to 20% more holes per charge in cordless rotary hammers. Breaker point pulverizes the material more effectively, resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammers while making it a very durable bit in corded and cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Additionally, M/2 features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2 2-Cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
Milwaukee Tools 48-20-7473

Milwaukee Tools 48-20-7473

Milwaukee Tools 48-22-6212 Comfort Grip Hex-Jaw Pliers 12"

48-22-6212

48-22-6212

Milwaukee Tools 48-22-6210 Comfort Grip Hex-Jaw Pliers 10"

48-22-6210

48-22-6210

Milwaukee Tool Inkzall 48-22-3751 Medium Bullet Tip Paint Marker, Green Milwaukee Inkzall liquid paint markers were designed from the ground up to provide users with the best performance on tough jobsite surfaces. All Inkzall Liquid Paint Markers feature a durable acrylic nib that can write on the dirtiest, hottest and roughest of surfaces. Proprietary paint developed specifically for Inkzall Liquid Paint Markers can mark on surfaces up to 300 deg F and dries in 10 seconds. For the most demanding environmental conditions, Inkzall Liquid Paint Markers provide the longest lasting marks that are both water and UV resistant.

• Writes on dirtiest, hottest, roughest surfaces
• Water and UV-resistant markings
• Marks on surfaces up to 300 deg F
• Durable acrylic nib
• Valve action marker Milwaukee Inkzall liquid paint markers were designed from the ground up to provide users with the best performance on tough jobsite surfaces. All Inkzall Liquid Paint Markers feature a durable acrylic nib that can write on the dirtiest, hottest and roughest of surfaces. Proprietary paint developed specifically for Inkzall Liquid Paint Markers can mark on surfaces up to 300 deg F and dries in 10 seconds. For the most demanding environmental conditions, Inkzall Liquid Paint Markers provide the longest lasting marks that are both water and UV resistant.

Milwaukee Tools 48-22-3409 TORQUE LOCK LONG NOSE LOCKING PLIERS WITH GRIP 9"

48-22-3409

48-22-3409

Milwaukee Inkzall liquid paint markers were designed from the ground up to provide users with the best performance on tough jobsite surfaces. All Inkzall Liquid Paint Markers feature a durable acrylic nib that can write on the dirtiest, hottest and roughest of surfaces. Proprietary paint developed specifically for Inkzall Liquid Paint Markers can mark on surfaces up to 300 deg F and dries in 10 seconds. For the most demanding environmental conditions, Inkzall Liquid Paint Markers provide the longest lasting marks that are both water and UV resistant.