Watts Water LF3001A-3/4 Dielectric Union 3/4" FPT x Sweat
dielectric unions are used in commercial and residential applications to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. It is installed between pipes made from dissimilar metals and is used on applications such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water piping. It consists of a female iron pipe thread to solder connection, union nut, two tailpieces, and a Buna-N gasket that separates the tailpieces to prevent an electric current from occurring.

• Buna-N gasket Designed and manufactured to the highest quality standards
• Maximum pressure is 250 psi (17.2 bar)
• Maximum temperature 180 degrees F (82 degrees C)
• Individually factory certified to withstand a minimum of 600 volts on a dry line with no flashover
• FIP thread to solder connections
• Meets federal specifications for tensile strength and thread end connections,
  ,
  
  
  
  

  LF3001A-3/4

  
  

  LF3001A-3/4

Watts Boasts a full line of top-quality ball valves for commercial, residential, and industrial applications, the Watts ball valve product line includes brass, bronze, carbon steel, cast iron, and stainless steel models. If you have a custom project on your hands, we have electric motorized valves to suit your needs. Our portfolio covers a wide span of connection types to  t applications within the Residential, Industrial, and Commercial markets, and thats not all, Watts offers various product accessories and material options such as handle kits or stainless steel ball and stem trims to ful ll a wide range installation requirements.
As of January 4, 2014 Lead Free* ball valves are required in certain applications and/or settings in the United States. Thats why the Watts line includes top quality, fully-tested Lead Free ball valves.

LFFBVS-3C-1-1/4

Watts LF70A-RK Valve Repair Kit For LF70A, LF70AT Hot Water Extender Tempering Valve Reduced Pressure Detector, 1/2 - 3/4"

• For standard temperature thermostat
• o-ring to prevent leaks

,
,

Watts Water LF70A-RK

Watts Water LF70A-RK

Watts Regulator lead free series LF150A water hammer arrestors are used in residential applications to control water pressure shock and prevent water hammer conditions. It consists of a pre-charged air chamber that is rechargeable, an air-tight sealing cap, standard tire valve connection for easy charging, stainless steel top, sealed-in diaphragm, lower stainless steel chamber, and brass hex adapter for easy installation. It can be installed in new or existing plumbing systems in any angle. Series LF150A is ideal for dishwashers, clothes washers, and quick-closing faucets.

• Pre-charged air chamber
• Sealed in diaphragm
• Complete stainless steel chamber construction
• Rechargeable

,
,

LF150A1/2

LF150A1/2

Watts Water LF3001A-1/2 Dielectric Union 1/2" OD x FPT Lead-Free,
,

LF3001A-1/2

LF3001A-1/2

Watts Water LF3001A-1-1/4 Dielectric Union 1-1/4" FPT x OD Lead Free
dielectric unions are used in commercial and residential applications to prevent accelerated corrosion and deterioration in the piping system due to galvanic and stray current. It is installed between pipes made from dissimilar metals and is used on applications such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water piping. It consists of a female iron pipe thread to solder connection, union nut, two tailpieces, and a Buna-N gasket that separates the tailpieces to prevent an electric current from occurring.

• Buna-N gasket Designed and manufactured to the highest quality standards
• Maximum pressure is 250 psi (17.2 bar)
• Maximum temperature 180 degrees F (82 degrees C)
• Individually factory certified to withstand a minimum of 600 volts on a dry line with no flashover
• FIP thread to solder connections
• Meets federal specifications for tensile strength and thread end connections,
  ,
  
  
  
  

  LF3001A-1-1/4

  
  

  LF3001A-1-1/4

Watts Regulators series LF100xL temperature and pressure relief valves are used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105000 BTU. They feature a Lead Free copper alloy body with MNPT and FNPT outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. The combined 2 in 1 temperature and pressure relief valve provides the least expensive and proven means for protection against both excessive temperature and pressure emergency conditions.

• Unique thermostat with special thermo-bonded coating
• Stainless steel springs
• Thermostat is accurate and proven and exclusively designed and manufactured by Watts
• 8" length thermostat

,
,

LF100XL-8-3/4

LF100XL-8-3/4

Watts Boasts a full line of top-quality ball valves for commercial, residential, and industrial applications, the Watts ball valve product line includes brass, bronze, carbon steel, cast iron, and stainless steel models. If you have a custom project on your hands, we have electric motorized valves to suit your needs. Our portfolio covers a wide span of connection types to  t applications within the Residential, Industrial, and Commercial markets, and thats not all, Watts offers various product accessories and material options such as handle kits or stainless steel ball and stem trims to ful ll a wide range installation requirements.
As of January 4, 2014 Lead Free* ball valves are required in certain applications and/or settings in the United States. Thats why the Watts line includes top quality, fully-tested Lead Free ball valves.

LFFBV-3C-1

Watts Boasts a full line of top-quality ball valves for commercial, residential, and industrial applications, the Watts ball valve product line includes brass, bronze, carbon steel, cast iron, and stainless steel models. If you have a custom project on your hands, we have electric motorized valves to suit your needs. Our portfolio covers a wide span of connection types to  t applications within the Residential, Industrial, and Commercial markets, and thats not all, Watts offers various product accessories and material options such as handle kits or stainless steel ball and stem trims to ful ll a wide range installation requirements.
As of January 4, 2014 Lead Free* ball valves are required in certain applications and/or settings in the United States. Thats why the Watts line includes top quality, fully-tested Lead Free ball valves.

LFFBV-3C-2

Watts Water LF100xL Lead Free Temperature and Pressure Relief Valve, 3/4", MNPT x FNPT, 150 psi, Copper Alloy

,

Watts Water LL100XL-LF

Watts Water LL100XL-LF

Watts 0559133 Brass Hot Water Extender Tempering Valve, 3/4", Sweat

• Simple maintenance thermostat assembly is easily removed and replaceable as a unit
• Finger tip dial adjustment cap
• Stainless steel springs

,
,

LF70A-3/4

LF70A-3/4

Watts LFIT6300 Lead Free Copper Silicon Alloy 2-Piece Full Port Ball Valve with Side Drain, 1/2", NPT

Lead free copper silicon alloy ball valves feature a side drain port to drain or vent downstream line when the valve is in the off position
• Full port orifice ensures maximum flow capacity and its ball is wiped clean during each operation of the valve
• Drain port allows draining or venting of downstream line when valve is in the off position
• Virgin PTFE valve seats are standard, suitable for a full range of liquids and gases, consult factory for specific applications
• Ball is wiped clean during each operation of the valve
• Blow-out proof pressure retaining stem
• Vinyl insulator on heavy duty handle
• Fast, quarter-turn open or close operation
• Low operating torque
• Adjustable stem packing gland
• Brass cap, handle and packing nut
• PTFE thrust washer
• Lead free copper silicon alloy adapter
  
  

  Watts Water LFIT6300