S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Series PLT potable water expansion tanks are designed to absorb the increased volume of water created by thermal expansion and to maintain balanced pressure throughout the potable water supply system. Series PLT tanks feature a pre-pressurized steel tank with an expansion membrane that prevents contact of the water with the air in the tank. This prevents loss of air to the water and ensures long and trouble-free life for the system. These tanks may be used with all types of Direct Fired Hot Water Heaters (gas, oil or electric) and hot water storage tanks.
- Heated water expands, and in a domestic hot water system, the system may be closed when the potable water system is isolated from the public water supply by a one-way valve such as pressure reducing valve, backflow preventer or check valve
- Rugged flexible butyl diaphragm
- Field adjustable pre-charge
- Can be used with most standard hot water heaters and storage tanks
- It shall have a Butyl diaphragm separating the air chamber from the water containing chamber
- Stainless steel inlet connection
- The potable water expansion tank shall be of drawn steel construction
- Materials of manufacture for the diaphragm shall be FDA approved
PLT-12
Item#:
PLT-12
Manufacturer Item:
PLT-12
Manufacturer:
WATTS REGULATOR CO
Series PLT potable water expansion tanks are designed to absorb the increased volume of water created by thermal expansion and to maintain balanced pressure throughout the potable water supply system. Series PLT tanks feature a pre-pressurized steel tank with an expansion membrane that prevents contact of the water with the air in the tank. This prevents loss of air to the water and ensures long and trouble-free life for the system. These tanks may be used with all types of Direct Fired Hot Water Heaters (gas, oil or electric) and hot water storage tanks.
- Heated water expands, and in a domestic hot water system, the system may be closed when the potable water system is isolated from the public water supply by a one-way valve such as pressure reducing valve, backflow preventer or check valve
- Rugged flexible butyl diaphragm
- Field adjustable pre-charge
- Can be used with most standard hot water heaters and storage tanks
- It shall have a Butyl diaphragm separating the air chamber from the water containing chamber
- Stainless steel inlet connection
- The potable water expansion tank shall be of drawn steel construction
- Materials of manufacture for the diaphragm shall be FDA approved
Watts Water PLT-5
Item#:
PLT-5
Manufacturer Item:
0067370
Manufacturer:
WATTS REGULATOR CO
Watts RA-1-AP Bronze Radiator Angle Valve, 1/2", Threaded x Male Union
- Rising stem
- Renewable composition disc
- Bronze bonnet, brass stem, retainer, swivel, disc nut and packing nut, Teflon stem packing, rubber NBR disc, plastic hand wheel, steel screw, aluminum name plate
RA-2-AP-1/2
Watts RA-1-AP Bronze Radiator Angle Valve, 1-1/2", Threaded x Male Union
- Rising stem
- Renewable composition disc
- Bronze bonnet, brass stem, retainer, swivel, disc nut and packing nut, Teflon stem packing, rubber NBR disc, plastic hand wheel, steel screw, aluminum name plate
RA-1-AP-1 1/2
Watts RA-1-AP Bronze Radiator Angle Valve, 1-1/4", FIP x Male Union
- Rising stem
- Renewable composition disc
- Bronze bonnet, brass stem, retainer, disc nut and packing nut, Teflon stem packing, rubber NBR disc, plastic hand wheel
Watts Water RA-1-114
Watts RA-1-AP Bronze Radiator Angle Valve, 3/4", FIP x Male Union
- Rising stem
- Renewable composition disc
- Bronze bonnet, brass stem, retainer, disc nut and packing nut, Teflon stem packing, rubber NBR disc, plastic hand wheel
RA-1-AP-3/4
Watts Water RA-1-SW-3/4 Bronze Radiator Gate Straight Valve 3/4" Threaded x Male Union,
,
,
RA-1-SW-3/4
RA-1-SW-3/4
Watts RA-1-AP Bronze Radiator Angle Valve, 1", FIP x Male Union
- Rising stem
- Renewable composition disc
- Bronze bonnet, brass stem, retainer, disc nut and packing nut, Teflon stem packing, rubber NBR disc, plastic hand wheel
Watts Water RA-1-1
P8-FLOAT
Watts Regulators series 1156F high capacity feed water pressure regulators are for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of an iron and bronze body construction with NPT threaded inlet and outlet connections, a tight seating check valve, purge lever for manual purging, and a stainless steel strainer. Series 1156F has high capacity performance and simplified servicing design.
- Tight seating check valve
- Purge lever for manual purging
- High capacity performance as well as unique simplified servicing accessibility for complete unitized maintenance
- Stainless steel strainer to protect the valve disc from fouling
- Designed to fill the boiler and system piping with water and to maintain water pressure in the system at all times
- Provide make up water to the system in the event of system leaks
- 15 psi factory set, 100 psi maximum working pressure
Watts Water SB1156F
Item#:
SB1156F
Manufacturer Item:
0386422
Manufacturer:
WATTS REGULATOR CO
Watts Regulators series 1156F high capacity feed water pressure regulators are for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of an iron and bronze body construction with NPT threaded inlet and outlet connections, a tight seating check valve, purge lever for manual purging, and a stainless steel strainer. Series 1156F has high capacity performance and simplified servicing design.
,
,
- Tight seating check valve
- Purge lever for manual purging
- High capacity performance as well as unique simplified servicing accessibility for complete unitized maintenance
- Stainless steel strainer to protect the valve disc from fouling
- Designed to fill the boiler and system piping with water and to maintain water pressure in the system at all times
- Provide make up water to the system in the event of system leaks
- 15 psi factory set, 100 psi maximum working pressure
,
,
Watts Water TB1156F
Watts Water TB1156F
Item#:
TB1156F
Manufacturer Item:
0386421
Manufacturer:
WATTS REGULATOR CO
Watts 0545007 Brass Gas Ball Valve 1",