Patented one piece forged brass body eliminates the possibility of seam leaks common to two-piece body designs
• Equipped with an integral 1/8" NPT tapped manometer test port and plug, eliminating the need for a separate test port fitting and shut-off valve near the appliance pilot assembly
• Chrome plated ball and soft seats resist contamination build-up and offer a positive seal in low- or moderate-pressure gas applications
• Quarter-turn, ball-type, forged brass design is more compact and superior to traditional cast bronze or cast iron gas cocks
• The 175 psi pressure rating permits high-pressure air tests, without the grease-seal blowout common to plug-type gas cocks
• Not suitable for steam service
• CSA certified for use with natural, manufactured, mixed, liquid petroleum and LP gas/air mixtures
• CSA certified 3-88 for use in 2 or 5 Lbs.. house piping systems
• Side taps
  
  

  Legend Valve 102-513L

Patented 1-piece forged brass body eliminates the possibility of seam leaks common to 2-piece body designs
• Chrome plated ball and soft seats resist contamination build-up and offer a positive seal in low- or moderate-pressure gas applications
• 1/4-turn, ball type, forged brass design is more compact and superior to traditional cast bronze or cast iron gas cocks
• The 175 psi pressure rating permits high-pressure air tests, without the grease-seal blowout common to plug-type gas cocks
• 2-different configurations, to accommodate all gas connection types
• Equipped with an integral 1/8" NPT tapped manometer test port and plug, eliminating the need for a separate test port fitting and shut-off valve near the appliance pilot assembly
• Commercial grade synthetic fiber thrust washer
• ASTM B-124 UNS C37700 forged brass stem retainer bushing and test port plug
• ASTM B-159 phosphor bronze wire stem retainer clip
• ANSI/ASME B18.2.1 IFI C18 zinc plated steel handle screw
• Commercial grade, die-cast aluminum coated handle
• Type 7PB496 ASTM D-2000 nitrile (NBR) rubber stem O-Ring
  
  

  Legend Valve 102-514L

Full pattern heavy-duty bronze body
• Equipped with 304 stainless steel 20 - mesh screen or 1/16" hole diameter perforated strainer
• Square-head closure plug furnished
• Ideal for protecting downstream components, by trapping and holding debris
• ASTM B-584 UNS C84400 bronze cap
• ASTM A-240 UNS S30400 304 stainless steel screen or strainer
• Commercial grade nitrilic bonded non-asbestos fiber cap gasket
• ASTM B-584 UNS C83600 bronze closure blowoff plug
• 1/2" NPT plug
  
  

  105-505

Rising stem
• Each valve is tested twice air under water, in the open and closed position
• Bronze bonnet, stem, tailpiece, union nut, steel screw handle, brass packing nut, Teflon packing, bronze and EPDM disc
  
  

  110114

110-113

Rising stem
• Each valve is tested twice air under water, in the open and closed position
• Bronze bonnet, stem, tailpiece, union nut, steel screw handle, brass packing nut, Teflon packing, bronze and EPDM disc
  
  

  Legend Valve 110-123