Fujitsu FO6016CSJNA A/C Condensing Unit Non-Communicating No Pressure Switch 16 SEER 208/230/1 R410A 4 Ton

• New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
• Better coat paint system  for a long lasting professional finish.
• Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability.
• Modern cabinet aesthetics  increased curb appeal with visually appealing design.
• Covered louver panels  provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
• Optimized fan orifice  optimizes airflow and reduces unit sound.
• Rust resistant screws  confirmed through 1500-hour salt spray testing.
• 3"-4"-5" service valve space  provides a minimum working area of 27-square"es for easier access.
• 15" wide, industry leading corner service access makes repairs easier and faster.
• External gauge port access  allows easy connection of low-loss gauge ports.
• Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
• Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal.
• Service trays  hold fasteners or caps during service calls.
• QR code  provides technical information on demand for faster service calls.
• Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.,
  
  

  Fujitsu FO6016CSJNA

  ,
  

  FO6016CSJNA

Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort.

K9332549010

Features

Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.

Factory-installed indoor coil.

Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics.

Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect.

11/2 ton [5.3 kW] through 5 ton [17.6 kW] models are between 421/2 to 551/2 inches [1080 to 1410 mm] tall and 22 inches [559 mm] deep.

All models meet or exceed 330 to 400 CFM [156 to 189 L/s] per ton at .3 inches [.7 kPa] of external static pressure.

Enhanced airflow up to .7" external static pressure.

Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing.

Cabinet air leakage less than 2% at 1 inch H2O when tested in accordance with ASHRAE standard 193

FH1817TPSASN

Fujitsu FH1817TPSJSN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

FH1817TPSJSN

Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort.

VRFCOMM

Fujitsu AUUA18TLAV Airstage VRF Compact Cassette Indoor Unit Heat Pump 18K

AUUA18TLAV

Fujitsu AUUA18TLAV2 Airstage VRF Compact Cassette Indoor Unit Heat Pump 18K

AUUA18TLAV2

Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort.

K9602850013

Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort.

K9601846017

Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort.

K9381200061

Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort.

K9603229009

Fujitsu General heating and cooling offers parts that are perfectly designed and engineered to fit your A/C and Heating Unit right the first time and deliver year-round comfort.

K9333009056