S2K Commerce - Products Dropdown
ActionsS2K Commerce - Shopping Cart
ActionsS2K Commerce - Order Entry
ActionsLovejoy 35350 Black EPDM 1-Piece Solid 5JE Coupling Sleeve, 2-15/16" OD, 1.56" W, 1/2 x 1-3/16" Bore
,
- The 1-piece solid design provides solutions for applications with unique requirements where small shaft separations inhibit the installation of a 1-piece solid sleeve
- Pre-molded teeth along the diameter of the sleeve engage with teeth of the coupling flanges
- No clamps or screws are needed to connect the flanges with the flexible sleeve which securely lock together under torque for smooth transmission of power
- Torque is transmitted through shear loading of the sleeve
,
Lovejoy 5JE
Lovejoy 6JE Black 1-Piece Solid EPDM Coupling Sleeve, 1.88" L
,
- The 1-piece solid design provides solutions for applications with unique requirements where small shaft separations inhibit the installation of a 1-piece solid sleeve
- Pre-molded teeth along the diameter of the sleeve engage with teeth of the coupling flanges
- No clamps or screws are needed to connect the flanges with the flexible sleeve which securely lock together under torque for smooth transmission of power
- Torque is transmitted through shear loading of the sleeve
,
Lovejoy 6JE
Lovejoy 7JE Black EPDM Elastomer Coupling Sleeve, 5/8 - 1-5/8" Bore, 725 Inch-lb
- Lovejoy offers flexible sleeve for S-Flex coupling in three designs: 1-piece solid, 1-piece split, and 2-piece with retaining ring
- The 1-piece split design provides solutions for applications with unique requirements where small shaft separations inhibit the installation of a 1-piece solid sleeve
- Pre-molded teeth along the diameter of the sleeve engage with teeth of the coupling flanges
- No clamps or screws are needed to connect the flanges with the flexible sleeve which securely lock together under torque for smooth transmission of power
- Torque is transmitted through shear loading of the sleeve
- All 3 sleeve materials are highly elastic which permits the S-Flex coupling to protect connected equipment from harmful shock loading, vibration, and shaft misalignment
- These sleeves feature a 1-piece design molded in EPDM and neoprene rubber
- 1 deg angular misalignment
- 0.062" maximum parallel misalignment
- 15 deg maximum tensional wind-up angle
- 0.125" axial misalignment
- EPDM has good resistance to commonly used chemicals and is generally not affected by dirt or moisture
Item#:
7JE
Manufacturer Item:
7JE
Manufacturer:
LOVEJOY INC
Lovejoy 8JE Black EPDM Elastomer Coupling Sleeve 8J,
,
,
8JE
Lovejoy 68514435359 Black EPDM Rubber Coupler Sleeve for S-Flex Couplings
,
- Unless otherwise specified, S-Flex couplings are supplied with EPDM flexible sleeves
- EPDM has good resistance to commonly used chemicals and is generally not affected by dirt or moisture
- Lovejoy offers flexible sleeve for S-Flex coupling in (3) designs: 1-piece solid, 1-piece split and 2-piece with retaining ring
- The 1-piece split design provides solutions for applications with unique requirements where small shaft separations inhibit the installation of a 1-piece solid sleeve
- Pre-molded teeth along the diameter of the sleeve engage with teeth of the coupling flanges
- No clamps or screws are needed to connect the flanges with the flexible sleeve which securely lock together under torque for smooth transmission of power
- Torque is transmitted through shear loading of the sleeve
- All 3-sleeve materials are highly elastic which permits the S-flex coupling to protect connected equipment from harmful shock loading, vibration and shaft misalignment
,
Lovejoy 4JE
Lovejoy 9JE Sleeve Coupling 9JE,
,
,
9JE
Lovejoy 36047 Gray Zinc Alloy 3J Sleeve Coupling Flange, 1/2", 1/8 x 1/16" Keyway
,
- The J type flanges in sizes 3J and 4J are made from die cast of high strength zinc alloy (tensile strength of 41000 psi) and are furnished bore-to-size
- J flanges are compatible with EPDM or neoprene sleeves
- Each flange has a keyway and (2) set screws, (1) set screw over the key and one at 90 deg to the keyway
- The J type coupling consists of 2 flanges and 1 sleeve
,
3J-1/2
Lovejoy 36051 Gray Zinc Alloy 4J Sleeve Coupling Flange, 1/2", 1/8 x 1/16" Keyway
,
- The J type flanges in sizes 3J and 4J are made from die cast of high strength zinc alloy (tensile strength of 41000 psi) and are furnished bore-to-size
- J flanges are compatible with EPDM or neoprene sleeves
- Each flange has a keyway and (2) set screws, (1) set screw over the key and one at 90 deg to the keyway
- The J type coupling consists of 2 flanges and 1 sleeve
,
4J-1/2
Lovejoy 36048 Gray Zinc Alloy 3J Sleeve Coupling Flange, 5/8", 3/16 x 3/32" Keyway
,
- The J type flanges in sizes 3J and 4J are made from die cast of high strength zinc alloy (tensile strength of 41000 psi) and are furnished bore-to-size
- J flanges are compatible with EPDM or neoprene sleeves
- Each flange has a keyway and (2) set screws, (1) set screw over the key and one at 90 deg to the keyway
- The J type coupling consists of 2 flanges and 1 sleeve
,
3J-5/8
Lovejoy 36052 Gray Zinc Alloy 4J Sleeve Coupling Flange, 5/8", 3/16 x 3/32" Keyway
,
- The J type flanges in sizes 3J and 4J are made from die cast of high strength zinc alloy (tensile strength of 41000 psi) and are furnished bore-to-size
- J flanges are compatible with EPDM or neoprene sleeves
- Each flange has a keyway and (2) set screws, (1) set screw over the key and one at 90 deg to the keyway
- The J type coupling consists of 2 flanges and 1 sleeve
,
4J-5/8
Lovejoy 132-1 Straight Jaw Short Coupling 7/16",
,
,
132-1
Lovejoy 133-3 Woods Coupler,
,
,