Home  > AEROFLEX USA ,INC(x)
|◀ ◀ 13 - 24 of 42 ▶ ▶|
View:

Cushion Clamp 5/8" x 3/4" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location



    UX5834

    • Item#:
    UX5834
    Manufacturer Item:
    UX5834-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX5834

    Cushion Clamp 7/8" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location



    UX7810

    • Item#:
    UX7810
    Manufacturer Item:
    UX7810-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX7810

    Cushion Clamp 7/8" x 3/4" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location



    UX7834

    • Item#:
    UX7834
    Manufacturer Item:
    UX7834-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX7834

    Elbow 90 Degree Long Radius Cover 1-3/8" x 3/4"

    Aeroflex EL13834LR Elbow cover 1-3/8" x 3/4",
    ,



    Aeroflex EL13834LR

    Item#:
    EL13834LR
    Manufacturer Item:
    EL13834LR
    Manufacturer:
    AEROFLEX USA ,INC
     
    EL13834LR

    Elbow 90 Degree Long Radius Cover 1-5/8" x 3/4"

    Aeroflex EL15810LR Elbow cover 1-5/8" x 3/4",
    ,



    EL15810LR

    Item#:
    EL15810LR
    Manufacturer Item:
    EL15810LR
    Manufacturer:
    AEROFLEX USA ,INC
     
    EL15810LR

    Pipe Insulation 1-1/8" x 1" x 6 Grey White Saniguard Jacketing

    Tube and Sheet Insulation is a highly flexible, closed-cell and lightweight EPDM-rubber based elastomeric product. Aerocel® Tube and Sheet Insulation is designed for insulating warm or cold piping, duct, or equipment. Aerocel® EPDM Elastomeric Tube and Sheet Insulation is supplied in 1/4", 3/8", 1/2", 3/4", 1", 1-1/4",1-1/2" 2", 2-1/2" and 3" thicknesses, in popular I.D. sizes up to 8" IPS, and as flat sheets and rolls. Please check for specific size combinations. The tightly formed, closed-cell structure of Aerocel® Pipe and Sheet Insulation makes it an efficient insulation, providing superior insulating capacity to many materials, including other elastomeric insulations. Aerocel is manufactured to consistently provide actual values on these key performance criteria for mechanical system insulation



    REF568-AC11810WG

    Item#:
    REF568-AC11810WG
    Manufacturer Item:
    568-AC11810WG
    Manufacturer:
    AEROFLEX USA ,INC
     
    Aeroflex _Install
    INSULTUBE_Spec

    Pipe Insulation 1-1/8" x 3/4" x 6' White Saniguard Jacketing

    Tube and Sheet Insulation is a highly flexible, closed-cell and lightweight EPDM-rubber based elastomeric product. Aerocel® Tube and Sheet Insulation is designed for insulating warm or cold piping, duct, or equipment. Aerocel® EPDM Elastomeric Tube and Sheet Insulation is supplied in 1/4", 3/8", 1/2", 3/4", 1", 1-1/4",1-1/2" 2", 2-1/2" and 3" thicknesses, in popular I.D. sizes up to 8" IPS, and as flat sheets and rolls. Please check for specific size combinations. The tightly formed, closed-cell structure of Aerocel® Pipe and Sheet Insulation makes it an efficient insulation, providing superior insulating capacity to many materials, including other elastomeric insulations. Aerocel is manufactured to consistently provide actual values on these key performance criteria for mechanical system insulation



    REF585-AC11834WG

    Item#:
    REF585-AC11834WG
    Manufacturer Item:
    585-AC11834WG
    Manufacturer:
    AEROFLEX USA ,INC
     
    Aeroflex _Install
    INSULTUBE_Spec
    REF585-AC11834WG_Broc

    Pipe Insulation 1-1/8" x 3/8" 6'

    Aeroflex is a flexible, closed-cell elastomeric tube insulation product used to conserve energy and prevent condensation on piping applications. The product's closed-cell structure creates exceptional thermal properties (k-value of 0.245 at 75 deg F and wvt of 0.03 perm-in) that protect against moisture penetration in applications within a -297 to 220 deg F temperature range. K-Flex Insul-Tube is widely used for its cold weather flexibility, durable skin surface, exacting manufacturing tolerances and lasting performance.
    • Insulated tube pipe insulation is an elastomeric material that helps retard heat loss, prevents condensation and provides effective moisture vapor resistance
    • Environmentally friendly, CFC free, mould and mildew resistant, fiber free and non-dusting
    • Can be used in underground applications above the water table
    • Seal before back filling
    • Unslit tubing can be slit lengthwise and fit over existing pipes
    • <7% linear shrinkage dimensional stability
    • <0.01 perm" water vapor permeability


      AC11838

    Item#:
    AC11838
    Manufacturer Item:
    212-AC11838
    Manufacturer:
    AEROFLEX USA ,INC
     
    Aeroflex _Install
    INSULTUBE_Spec

    Pipe Insulation 1/2" x 3/4" x 6 Grey White Saniguard Jacketing

    Tube and Sheet Insulation is a highly flexible, closed-cell and lightweight EPDM-rubber based elastomeric product. Aerocel® Tube and Sheet Insulation is designed for insulating warm or cold piping, duct, or equipment. Aerocel® EPDM Elastomeric Tube and Sheet Insulation is supplied in 1/4", 3/8", 1/2", 3/4", 1", 1-1/4",1-1/2" 2", 2-1/2" and 3" thicknesses, in popular I.D. sizes up to 8" IPS, and as flat sheets and rolls. Please check for specific size combinations. The tightly formed, closed-cell structure of Aerocel® Pipe and Sheet Insulation makes it an efficient insulation, providing superior insulating capacity to many materials, including other elastomeric insulations. Aerocel is manufactured to consistently provide actual values on these key performance criteria for mechanical system insulation



    REF564-AC1234WG

    Item#:
    REF564-AC1234WG
    Manufacturer Item:
    564-AC1234WG
    Manufacturer:
    AEROFLEX USA ,INC
     
    REF564-AC1234WG

    Pipe Insulation 1-3/8" x 3/4" x 6' Grey White Saniguard Jacketing

    Tube and Sheet Insulation is a highly flexible, closed-cell and lightweight EPDM-rubber based elastomeric product. Aerocel® Tube and Sheet Insulation is designed for insulating warm or cold piping, duct, or equipment. Aerocel® EPDM Elastomeric Tube and Sheet Insulation is supplied in 1/4", 3/8", 1/2", 3/4", 1", 1-1/4",1-1/2" 2", 2-1/2" and 3" thicknesses, in popular I.D. sizes up to 8" IPS, and as flat sheets and rolls. Please check for specific size combinations. The tightly formed, closed-cell structure of Aerocel® Pipe and Sheet Insulation makes it an efficient insulation, providing superior insulating capacity to many materials, including other elastomeric insulations. Aerocel is manufactured to consistently provide actual values on these key performance criteria for mechanical system insulation



    REF586-AC13834WG

    Item#:
    REF586-AC13834WG
    Manufacturer Item:
    586-AC13834WG
    Manufacturer:
    AEROFLEX USA ,INC
     
    Aeroflex _Install
    INSULTUBE_Spec

    Pipe Insulation 1-3/8" x 3/8" x 6'

    Aeroflex is a flexible, closed-cell elastomeric tube insulation product used to conserve energy and prevent condensation on piping applications. The product's closed-cell structure creates exceptional thermal properties (k-value of 0.245 at 75 deg F and wvt of 0.03 perm-in) that protect against moisture penetration in applications within a -297 to 220 deg F temperature range. K-Flex Insul-Tube is widely used for its cold weather flexibility, durable skin surface, exacting manufacturing tolerances and lasting performance.
    • Insulated tube pipe insulation is an elastomeric material that helps retard heat loss, prevents condensation and provides effective moisture vapor resistance
    • Environmentally friendly, CFC free, mould and mildew resistant, fiber free and non-dusting
    • Can be used in underground applications above the water table
    • Seal before back filling
    • Unslit tubing can be slit lengthwise and fit over existing pipes
    • <7% linear shrinkage dimensional stability
    • <0.01 perm" water vapor permeability


      AC13838

    Item#:
    AC13838
    Manufacturer Item:
    214-AC13838
    Manufacturer:
    AEROFLEX USA ,INC
     
    Aeroflex _Install
    INSULTUBE_Spec

    Pipe Insulation 1-5/8" x 3/4" x 6 Grey White Saniguard Jacketing

    Tube and Sheet Insulation is a highly flexible, closed-cell and lightweight EPDM-rubber based elastomeric product. Aerocel® Tube and Sheet Insulation is designed for insulating warm or cold piping, duct, or equipment. Aerocel® EPDM Elastomeric Tube and Sheet Insulation is supplied in 1/4", 3/8", 1/2", 3/4", 1", 1-1/4",1-1/2" 2", 2-1/2" and 3" thicknesses, in popular I.D. sizes up to 8" IPS, and as flat sheets and rolls. Please check for specific size combinations. The tightly formed, closed-cell structure of Aerocel® Pipe and Sheet Insulation makes it an efficient insulation, providing superior insulating capacity to many materials, including other elastomeric insulations. Aerocel is manufactured to consistently provide actual values on these key performance criteria for mechanical system insulation



    REF587-AC15834WG

    Item#:
    REF587-AC15834WG
    Manufacturer Item:
    587-AC15834WG
    Manufacturer:
    AEROFLEX USA ,INC
     
    Aeroflex _Install
    INSULTUBE_Spec
    |◀ ◀ 13 - 24 of 42 ▶ ▶|
    View: