Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

The Bosch Climate 5000 Ductless Series provides simple installation, maintenance, and cleaning. Shorter service times and high quality mean minimizing money spent while maximizing comfort and peace-of-mind.
The Climate 5000 System utilizes a combination of efficient technologies to achieve up to a 25 SEER rating, reducing electricity usage and lowering your electric bill.(1) (1)Compared to 14 SEER wall-mounted systems. (2)With Silent mode §Please go to boschheatingandcooling.com for full limited warranty details. (4)Available in 115V *Product sold separately & additional accessory required

Features

100% heating capacity between -5ºF and 5º F, depending on system configuration

No additional accessory needed for Low Ambient Cooling operation down to -22ºF with MAX Performance System (Maximum 107% Cooling capacity at -22ºF)

Whisper quiet operation: ODU as low as 55.5 dB, IDU as low as 20 dB(2)

Wired wall thermostat, 24V Interface for use with 24V thermostat

Factory installed base pan heater for all ODU models

Built in condensate pump for Cassette & Ducted IDU's

10 year compressor & 5 year parts residential warranty§

Compatible with the Bosch Connected Control (BCC) Wi-Fi Thermostat family

The Bosch Climate 5000 Ductless Series provides simple installation, maintenance, and cleaning. Shorter service times and high quality mean minimizing money spent while maximizing comfort and peace-of-mind.
The Climate 5000 System utilizes a combination of efficient technologies to achieve up to a 25 SEER rating, reducing electricity usage and lowering your electric bill.(1) (1)Compared to 14 SEER wall-mounted systems. (2)With Silent mode §Please go to boschheatingandcooling.com for full limited warranty details. (4)Available in 115V *Product sold separately & additional accessory required

Features

100% heating capacity between -5ºF and 5º F, depending on system configuration

No additional accessory needed for Low Ambient Cooling operation down to -22ºF with MAX Performance System (Maximum 107% Cooling capacity at -22ºF)

Whisper quiet operation: ODU as low as 55.5 dB, IDU as low as 20 dB(2)

Wired wall thermostat, 24V Interface for use with 24V thermostat

Factory installed base pan heater for all ODU models

Built in condensate pump for Cassette & Ducted IDU's

10 year compressor & 5 year parts residential warranty§

Compatible with the Bosch Connected Control (BCC) Wi-Fi Thermostat family

Bosch Heating Parts Oil Burner Beckett NXG115WS/3

Bosch Heating Parts Oil Burner Beckett NXG115WS/4

Bosch Heating Parts Oil Burner Carlin EZ66 G215/5

Flow Rate

Atomizing nozzles are available in a wide range of flow rates, all but eliminating the need for specially calibrated nozzles. Between 1.00 GPH and 2.00 GPH, for example, seven different flow rates are available. Generally, with hot water and warm air heat, the smallest firing rate that will adequately heat the house on the coldest day is the proper size to use and the most economical. Short on-cycles result in low efficiency. Another guideline is to select the flow rate that provides a reasonable stack temperature regardless of the connected load. (According to the New England Fuel Institute, aim for a stack temperature of 400°F or lower on matched packaged units or 500°F or lower on conversion burners.) If the boiler or furnace is undersized for the load, it may be necessary to fire for the load and ignore the efficiency
Spray Angle

Spray angles are available from 30° through 90° in most nozzle sizes to meet the requirements of a wide variety of burner air patterns and combustion chambers. Usually it is desirable to fit the spray angle to the air pattern of the burner. In todays flame retention burner, it is possible to fire more than one spray angle with good results. Generally, round or square combustion chambers should be fired with 70° to 90° nozzles. Long, narrow chambers usually require 30° to 60° spray angles.

Burner Air Patterns

Burner air patterns are much like nozzle spray patterns in that they fall into the same general classifications, either hollow or solid. As you would expect, a burner with a hollow air pattern generally requires a hollow cone fuel nozzle. A burner with a solid air pattern will give highest efficiency with a solid cone nozzle, but the flame will probably be longer.

Flow Rate

Atomizing nozzles are available in a wide range of flow rates, all but eliminating the need for specially calibrated nozzles. Between 1.00 GPH and 2.00 GPH, for example, seven different flow rates are available. Generally, with hot water and warm air heat, the smallest firing rate that will adequately heat the house on the coldest day is the proper size to use and the most economical. Short on-cycles result in low efficiency. Another guideline is to select the flow rate that provides a reasonable stack temperature regardless of the connected load. (According to the New England Fuel Institute, aim for a stack temperature of 400°F or lower on matched packaged units or 500°F or lower on conversion burners.) If the boiler or furnace is undersized for the load, it may be necessary to fire for the load and ignore the efficiency
Spray Angle

Spray angles are available from 30° through 90° in most nozzle sizes to meet the requirements of a wide variety of burner air patterns and combustion chambers. Usually it is desirable to fit the spray angle to the air pattern of the burner. In todays flame retention burner, it is possible to fire more than one spray angle with good results. Generally, round or square combustion chambers should be fired with 70° to 90° nozzles. Long, narrow chambers usually require 30° to 60° spray angles.

Burner Air Patterns

Burner air patterns are much like nozzle spray patterns in that they fall into the same general classifications, either hollow or solid. As you would expect, a burner with a hollow air pattern generally requires a hollow cone fuel nozzle. A burner with a solid air pattern will give highest efficiency with a solid cone nozzle, but the flame will probably be longer.

Bosch Heating Parts Oil Burner Riello F10 G215/5

Bosch Heating Parts Oil Burner Riello F10 G215/6

Bosch Heating Parts Oil Burner Riello F10 G215/7

Bosch Heating Parts 7738007398 Oil Burner Riello F3B G115WS/3