Home  > INTERNATIONAL COMFORT PRODUCTS(x)
|◀ ◀ 181 - 192 of 1132 ▶ ▶|
View:

Air Handler Multi-Position 3 Ton 208/230 TXV R410A ECM Motor 53-7/16" H x 21-1/8" L x 22-1/16" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
    • Item#:
    FVM4X3600BL
    Manufacturer Item:
    FVM4X3600BL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FVM4X3600BL_Install
    FVM4X3600BL_Spec

    Oil Furnace Lo-Boy 81-94K BTU Output 85.6-86.5% AFUE 120 VAC 4 Ton Cooling Heavy Gauge Heat Exchanger, Low Profile, Easy Assess Control Panel

    Heil OLR High-Gloss Baked Lowboy Oil Furnace, 86.5% AFUE, 115 VAC, 95200 - 112000 BTU, 1600 cfm
    • Heavy gauge heat exchanger quickly transfers heat to the ambient air
    • Direct drive motor permanently lubricated for long life performance
    • High density acoustic wool dampens combustion sound
    • Choice of high static pressure oil burners
    • External for easy access and sealed
    • Easy access control panel
    ,
    ,

    Item#:
    OLR112A16
    Manufacturer Item:
    OLR112A16A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    OLR112A16_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

    Quiet performance
  • Variable-speed, constant airflow (VCA) ECM blower motor and two-stage gas valve also provide enhanced levels of temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • Wi-Fi enabled remote access with the Ion System Control
  • 10-Year No Hassle Replacement Limited Warranty
  • 10-Year Parts Limited Warranty upon timely registration
  • Lifetime Heat Exchanger Limited Warranty upon timely registration

    • Item#:
    F80CTL0451712A
    Manufacturer Item:
    F80CTL0451712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    F80CTL_Spec

    Air Conditioning Condensing Unit Quiet Performance 1.5 Ton

    Efficiency
  • 13.4 - 16.0 SEER2 (13.5 - 16.5 SEER)
  • 11.0  13.5 EER2 (11.0 - 14.5 EER)
  • Indoor air quality accessories available
  • Reliability
  • R-410A refrigerant - environmentally sound, wont deplete the ozone layer and low lifetime service cost.
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
  • Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard
    • Item#:
    N4A4S18AKANA
    Manufacturer Item:
    N4A4S18AKANA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N4A4S-ICP-Service_Misc
    N4A4S-ICP_Install
    N4A4S-ICP_Spec

    Air Handler Multi-Position 2 Ton 208/230 TXV R410A ECM Motor 42-11/16" H x 17-5/8" L x 22" D

  • 11/2 thru 5 tons
  • Available for Environmentally Sound R410A systems
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models
  • Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
  • TXV metering device factory installed
  • ECM motor
  • Copper tube / aluminum fin coil on standard models Available with industry exclusive tin coated copper main tubing for additional corrosion protection
  • Sweat connections
  • Primary and secondary drain fittings with brass inserts
  • 3 amp automotive type fuse in wire harness
  • Multiple electrical entry locations
  • Time delay relay (TDR) programmed in motor
  • Field installed heater packages from 5 kW  30 kW available separately
  • HUD approved for manufactured housing
  • 208/230160 supply voltage
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Multiposition installation  upflow or horizontal left
    standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • No Heat (Plug) Kit factory installed
  • Filter (washable) factory supplied
    • Item#:
    FVM4X2400BL
    Manufacturer Item:
    FVM4X2400BL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FVM4X2400BL_Install
    FVM4X2400BL_Spec

    Oil Furnace Lo-Boy 66-82K BTU Output 85-86.1% AFUE 120 VAC 3 Ton Cooling Heavy Gauge Heat Exchanger, Low Profile, Easy Assess Control Panel

    Heil OLR High-Gloss Baked Lowboy Oil Furnace, 86.1% AFUE, 115 VAC, 70000 - 98000 BTU, 1200 cfm
    • Heavy gauge heat exchanger quickly transfers heat to the ambient air
    • Direct drive motor permanently lubricated for long life performance
    • High density acoustic wool dampens combustion sound
    • Choice of high static pressure oil burners
    • External for easy access and sealed
    • Easy access control panel
    ,
    Item#:
    OLR098A12
    Manufacturer Item:
    OLR098A12A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    OLR098A12_Spec

    80% 18 Speed Ultra-Low NOX Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • 80% AFUE
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • R80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    • Item#:
    R80MSU0601716A
    Manufacturer Item:
    R80MSU0601716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSU-ICP-Warranty_Misc
    R80MSU-ICP_Install
    R80MSU-ICP_Spec

    80% 18 Speed Ultra-Low NOX Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • 80% AFUE
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • R80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    • Item#:
    R80MSU0802120A
    Manufacturer Item:
    R80MSU0802120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSU-ICP-Warranty_Misc
    R80MSU-ICP_Install
    R80MSU-ICP_Spec

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products N80MSN0701712A

    • Item#:
    N80MSN0701712A
    Manufacturer Item:
    N80MSN0701712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 24-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    • Item#:
    N80MSN0902420A
    Manufacturer Item:
    N80MSN0902420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products N80MSN0902120A

    • Item#:
    N80MSN0902120A
    Manufacturer Item:
    N80MSN0902120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
    • Item#:
    N80MSN0702116A
    Manufacturer Item:
    N80MSN0702116A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install
    |◀ ◀ 181 - 192 of 1132 ▶ ▶|
    View: