|◀ ◀ 1 - 12 of 1202 ▶ ▶|
View:

Heat Pump Condensing Performance Series 2 Ton

Efficiency
  • 14.3 - 15.2 SEER2 / 11.0 - 12.5 EER2 / 7.5 - 8.1 HSPF2 (depending on unit size and indoor combination installed)
  • Indoor air quality accessories available
  • Sound
  • Sound levels as low as 69 dBA with accessory sound blanket
  • Comfort
  • System supports programmable or standard thermostat controls
  • Reliability
  • Non-ozone depleting R-410A refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Loss of charge switch
  • Filter drier
  • Balanced refrigeration system for maximum reliability

    International Comfort Products R4H5S24AKAAA

    • Item#:
    R4H5S24AKAAA
    Manufacturer Item:
    R4H5S24AKAAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R4H5S-ICP-Warranty_Misc
    R4H5S-ICP_Install
    R4H5S-ICP_Spec

    Package Roof Top Unit Gas 8 Ton 96K BTU 15 SEER 208/230/3 Medium Heat, Stand/Medium Static Direct Drive ECM W/X-Vane

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection

    International Comfort Products Commercial RGV102HE2A0AAA

    • Item#:
    RGV102HE2A0AAA
    Manufacturer Item:
    RGV102HE2A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc

    Package Roof Top Unit Gas 7.5 Ton 90K BTU 15 SEER 460/3 Medium Heat, Stand/Medium Static Direct Drive ECM W/X-Vane

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection

    International Comfort Products Commercial RGV090LE2A0AAA

    • Item#:
    RGV090LE2A0AAA
    Manufacturer Item:
    RGV090LE2A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc

    Package Roof Top Unit Gas 7.5 Ton 90K BTU 15 SEER 208/230/3 Hi Heat, HI Static Direct Drive ECM W/X-Vane

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection

    International Comfort Products Commercial RGV090HF3A0AAA

    • Item#:
    RGV090HF3A0AAA
    Manufacturer Item:
    RGV090HF3A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc

    Package Roof Top Unit Gas 7.5 Ton 90K BTU 15 SEER 208/230/3 Medium Heat, Stand/Medium Static Direct Drive ECM W/X-Vane

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection

    International Comfort Products Commercial RGV090HE2A0AAA

    • Item#:
    RGV090HE2A0AAA
    Manufacturer Item:
    RGV090HE2A0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc

    Air Handler Multi-Position Piston 4 Ton 208/230 VAC Installed TXV 49-5/8" H x 24-11/16" W x 22-1/16" D

  • TXV metering device
  • Aluminum tube and fin evaporator coil
  • Primary and secondary drain fittings with brass inserts
  • 5 amp automotive type fuse on control board
  • Multiple electrical entry locations time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1" WC
  • 1" thick insulation with R value of 4.2
  • Multi-position installation - upflow or horizontal left standard, horizontal right with minor modification (field convertible to down-flow with accessory kits)
  • No heat (plug) kit factory installed
  • 5-speed ECM motor
  • Low VAC age circuit protective fuse (3 amp) inline on wire harness

    International Comfort Products FEM4P4800AL

    • Item#:
    FEM4P4800AL
    Manufacturer Item:
    FEM4P4800AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FEM4P4800AL_Spec

    Air Handler Multi-Position Piston 3-1/2 Ton 208/230 VAC Installed TXV 49-5/8" H x 17-5/8" W x 22-1/16" D

  • TXV metering device
  • Aluminum tube and fin evaporator coil
  • Primary and secondary drain fittings with brass inserts
  • 5 amp automotive type fuse on control board
  • Multiple electrical entry locations time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1" WC
  • 1" thick insulation with R value of 4.2
  • Multi-position installation - upflow or horizontal left standard, horizontal right with minor modification (field convertible to down-flow with accessory kits)
  • No heat (plug) kit factory installed
  • 5-speed ECM motor
  • Low VAC age circuit protective fuse (3 amp) inline on wire harness

    International Comfort Products FEM4P4200AL

    • Item#:
    FEM4P4200AL
    Manufacturer Item:
    FEM4P4200AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FEM4P4200AL_Spec

    Package Roof Top Unit Gas 6 Ton 72K BTU 15 SEER 208/230/3 Hi Heat,X-Vane,Direct Drive Medium Static

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection

    International Comfort Products Commercial RGV072HFFA0AAA

    • Item#:
    RGV072HFFA0AAA
    Manufacturer Item:
    RGV072HFFA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc

    Air Handler Multi-Position Piston 2.5 Ton 208/230 VAC Installed TXV 49-5/8" H x 17-5/8" W x 22-1/16" D

  • TXV metering device
  • Aluminum tube and fin evaporator coil
  • Primary and secondary drain fittings with brass inserts
  • 5 amp automotive type fuse on control board
  • Multiple electrical entry locations time delay relay (TDR)
  • HUD approved for manufactured housing
  • Units tested and certified by manufacturer to achieve a 2% or less leakage rate at 1" WC
  • 1" thick insulation with R value of 4.2
  • Multi-position installation - upflow or horizontal left standard, horizontal right with minor modification (field convertible to down-flow with accessory kits)
  • No heat (plug) kit factory installed
  • 5-speed ECM motor
  • Low VAC age circuit protective fuse (3 amp) inline on wire harness

    International Comfort Products FEM4P3000AL

    • Item#:
    FEM4P3000AL
    Manufacturer Item:
    FEM4P3000AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FEM4P3000AL_Spec

    Air Handler Multi-Position 4 Ton 208/230 VAC W/Observer 1600 CFM R410A Smart Diagnostic 53-7/16" H x 21-1/8" W x 22-1/6" D

    Gray Pre-Painted Galvanized Cabinet Sheet Metal Cabinet Upflow/Downflow/Horizontal Multi-Position Type A Evaporator Fan Coil with EC Motor and TXV Metering,
    • Communicating, self configuring when used with observer communicating wall control
    • Smart diagnostic for easier troubleshooting
    • Bi-flow hard-shutoff R-410A TXV metering device
    • HUD approved for manufactured housing
    • Primary and secondary brass drain connections
    • Energy efficient variable speed ECM motor
    • Ultra - low power consumption during fan only operation
    • High duct static capability
    • Pre-painted Galvanized sheet metal cabinet insulation with vapor barrier
    • Cabinet construction designed to prevent cabinet sweating
    • Meets requirements of a 2% cabinet leakage rate when tested at 1" WC of static pressure
    • Modular cabinet on 5 Ton model
    • Multiple electrical entry for application flexibility
    • Low VAC age terminal strip
    • Easy plug connection provided for quick installation of accessory heater packages
    • Factory supplied washable filter easily removed - no tools required

      International Comfort Products FCM4X4800AL

    Item#:
    FCM4X4800AL
    Manufacturer Item:
    FCM4X4800AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FCM4X-ICP_Spec

    Air Handler Multi-Position 2 Ton 208/230 VAC W/Observer 800 CFM Smart Diagnostic 42-11/16" H x 17-5/8" W x 22-1/6" D

    Gray Pre-Painted Galvanized Cabinet Sheet Metal Cabinet Upflow/Downflow/Horizontal Multi-Position Type A Evaporator Fan Coil with EC Motor and TXV Metering,
    • Communicating, self configuring when used with observer communicating wall control
    • Smart diagnostic for easier troubleshooting
    • Bi-flow hard-shutoff R-410A TXV metering device
    • HUD approved for manufactured housing
    • Primary and secondary brass drain connections
    • Energy efficient variable speed ECM motor
    • Ultra - low power consumption during fan only operation
    • High duct static capability
    • Pre-painted Galvanized sheet metal cabinet insulation with vapor barrier
    • Cabinet construction designed to prevent cabinet sweating
    • Meets requirements of a 2% cabinet leakage rate when tested at 1" WC of static pressure
    • Modular cabinet on 5 Ton model
    • Multiple electrical entry for application flexibility
    • Low VAC age terminal strip
    • Easy plug connection provided for quick installation of accessory heater packages
    • Factory supplied washable filter easily removed - no tools required

      International Comfort Products FCM4X2400AL

    Item#:
    FCM4X2400AL
    Manufacturer Item:
    FCM4X2400AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    FCM4X-ICP_Spec

    Package Roof Top Unit Gas 5 Ton 60K BTU 14 SEER 208/230/1 Medium Heat,X-Vane,Direct Drive Medium Static

  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection

    International Comfort Products Commercial RGV061KEFA0AAA

    • Item#:
    RGV061KEFA0AAA
    Manufacturer Item:
    RGV061KEFA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    Commerical-Rooftop_Broc
    |◀ ◀ 1 - 12 of 1202 ▶ ▶|
    View: