Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

JB Industries M2-825 Steel Case High Side Manifold Pressure Gauge, 3-1/8 JB offers 3-1/8" (80 mm) illuminated gauge. The glow-in-the-dark dials store energy to emit light in dimly lit or dark applications. The R-410A only gauges are not glow-in-the-dark due to their pink dial. The illuminated large gauges are also available with 1% accuracy rating. Gauges are sensitive instruments and should not be subjected to pressures beyond scale.

JB Industries M17-35 Refrigeration Access Fitting
JB Industries M17-35

JB Industries M17-28 Brass Swivel Access Union 1/4" Flare x 1/4" Female Flare
JB machines all of the access valves at the factory in Aurora, Illinois using the highest level of brass consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content, resulting in higher failure rates. JB machines all of our valves to the strict guidelines of the ARI to ensure proper sealing of the valve and core surfaces. Our access fittings have generous counter bores to allow for the removal of the core if the flare becomes damaged. All tees and crosses are tapped to receive an access core in all 1/4" SAE flare ends. All pipe connections have internal braze cups for dip tube applications. All valves are equipped with cap and one valve core (braze type, loosely assembled). Temperature range -40 degrees to +250 degrees Fahrenheit (-40 to 121.1 degrees Celsius). Valve core is stainless steel and brass for use with all refrigerants including R-410A. Resistant to oils, alkalites, and diluted mineral acids.,

JB Industries NFT5-5 Brass O-Ring Seal Cap 5/16" Flare,
JB Industries NFT5-5

JB Industries NFT5-8 Refrigeration Finger Tight Flare Cap
JB Industries NFT5-8

JB Industries NFT5-4-100 Refrigeration Finger Tight Cap
JB Industries NFT5-4-100

JB Industries NFT5-4EA Refrigeration Finger Tight Flare Cap
JB Industries NFT5-4EA

24 pt bottles of black gold vacuum pump oil. Black Gold Vacuum Pump Oil is the gold standard in vacuum pump care. For use in any vacuum pump, Black Gold is extremely pure and non-detergent. Our Black Gold is hydro processed, meaning it goes through a series of catalytic steps rendering the oil extremely refined, more viscous, and more stable. The result is clear mineral oil which will alert you to contamination sooner as it becomes cloudy or milky. In extreme temperatures, the oil will be more resistant to contaminants. We still recommend, however, that the oil be changed after every evacuation for maximum performance and pump efficiency. The best test to see if your oil is contaminated is through a micron gauge. With a leak-free system, if your DV-22N micron gauge is still not reading a deep vacuum, the oil is too contaminated and should be changed. If the micron gauge pulls down to about 50 micron the oil is good.

JB Industries M2-6 Brass 2-Valve Manifold with CL 36" Hose in Red and Blue and 60" in Yellow

Surge dampened gauges for reduced needle movement
• Standard 2-1/2" gauges
• Metric styles available
• Original free floating dual o-ring sealing system for faster evacuation/charging
• All metal gauges
• Color coded refrigerant dials for easy reading
• Pull-out proof hanging hook
• Replaceable intake/hose holder fittings for storage
• Easy turning plastic hand wheels
  

Malco N2 2-Port Brass Refrigerant Manifold No Hoses R12R22R502

JB Industries Kobra CCLV-6 Kevlar High Pressure Charging Hose Set with CLV-6 series hoses feature a ball valve 6" whip end with ball valve that opens to full flow. These can be used as replacements for the CLV Kobra high pressure series or to connect to other hose fittings. Our patent pending design of the fittings features a hood that locks the gasket into the fitting with a straight edge to straight edge force that eliminates the blowout of the gasket. The barbed depressor locks into the gasket, exuding more outward force and pushing the gasket further into place. This depressor is precisely machined for maximum flow and has a dimple that guides the valve core into place. Kobra high pressure hoses are made from Kevlar - the same material that stops bullets in bullet-proof vests. Kevlar makes our hoses strong and flexible, while the nitrile cover extends the life of the hoses better than neoprene. Kobra hoses are made in the USA

JB Industries PR-66 Replaces B PR-76 Tee,