Sid Harvey Remanufactured C255-110R

Sid Harvey Remanufactured C293-3R

Sid Harvey Remanufactured C255-140R

• ,
  
  

  Sid Harvey Remanufactured C434-9R

Sid Harvey Remanufactured C434-7R

• The PA404 is a series 40 (2-wire, SPST) pressuretrol controller for use in 24, 120, 240 or 277 volt control circuits or in self powered (millivoltage) applications
• The PA404B is used with suspension-type unit heaters to make the fan circuit when a pressure rise indicates the presence of steam
• Each model contains an SPST micro-switch snap-acting switch
• Sensitive pressure-actuated diaphragm expands or contracts with pressure variations, moving a lever mechanism which operates the snap switch
• A screw on top of the case allows set point adjustment without removing the cover
• Differential is adjusted by means of a dial located inside the case
• Recommended minimum set point is differential setting plus 1-1/2 psi
• Tradeline value
• Stainless steel diaphragm sensor element
• Additive or subtractive differential type
• Makes at set point plus differential on pressure rise, breaks at set point on pressure fall
• 50 psi pressure surge
• 0.5-9 psi adjustable scale range,
  
  

  Sid Harvey Remanufactured C354-1R

Sid Harvey Remanufactured C346-73R

Sid Harvey Remanufactured C255-138R

Sid Harvey Remanufactured C322-4R

Immersion-type controllers that combine high limit protection with low limit and circulator control in forced hydronic heating systems
• Require 24 VAC thermostat with heat anticipator set at 0.2 amp (plus current draw of gas valve on L8124E)
• Include diaphragm powerhead and micro Switch assembly that respond to temperature changes in boiler water
• Mount directly to boiler
• Provide multi-zone control by using a separate circulator and R845 relay for each zone
• Electrical burner rating: full load - 7.4 amp at 120 VAC line voltage, 3.7 amp at 240 VAC; locked rotor - 44.4 amp at 120 VAC line voltage, 22.7 amp at 240 VAC
• Electrical circulator rating: 7.4 amp at 120 VAC, 3.7 amp at 240 VAC full load; 44.4 amp at 120 VAC, 22.2 amp at 240 VAC locked rotor

Sid Harvey Remanufactured C317-8R

Immersion type controllers that combine high limit protection with low limit and circulator control in forced hydronic heating systems
• Provide multi-zone control by using a separate circulator and R845 relay for each zone
• Include diaphragm powerhead and micro switch assembly that respond to temperature changes in boiler water
• Mount directly to boiler
• Select models include large transformers and extra terminals for supplying power to low voltage zone valves
• Require 24 VAC thermostat with heat anticipator set at 0.2 amp (plus current draw of gas valve on L8124E)
  
  

  Sid Harvey Remanufactured C317-5R

Sid Harvey Remanufactured C332-6R