Fieldpiece Instruments The SDMN6 dual-port manometer measures gas and static pressure and also accurately tests pressure switches by simulating a draft with an internal pump. A pressure switch is a safety device that prevents the furnace from running in an unsafe manner. The SDMN6 tests the pressure switch to determine if it is working properly, or if it is starting to fail which can cause the furnace to run in an unsafe manner. Plus, with the SDMN6 you can easily calibrate any adjustable pressure switch to manufacturers' specification, so there's no need to carry a large variety of pressure switches on your truck. The Dual Port Manometer has the ranges to measure gas pressure and the resolution needed to measure static pressure. Ideal for HVACR field service technicians, the SDMN6 can determine if the gas pressure coming into the house or out of the regulator are correct. The SDMN6 measures gas pressure up to 60" WC with a resolution of 0.1" WC. In addition, the unit measures both positive and negative pressure, which is used for measurement on vacuum control lines. The unit will take differential pressure readings and display the difference between P1 and P2 at all times in the lower right corner of the easy-to-read LCD. Four different measurement scales can be used:"es of water column, millimeters of water column, Mbars, and PSI. The SDMN6 also has a zero adjust to zero out the meter in different ambient pressures. It has a hold button to hold the currently displayed reading. The auto-power-off function conserves battery life, but can be disabled if desired. In the static pressure mode, the unit can measure up to 2" WC with resolution to 0.010" WC, which enables a technician to measure small differences in air (or static) pressure

Fieldpiece Instruments SDMN6

Fieldpiece Instruments SC640 Loaded Clamp Meter, 400 amp, 50 mili-ohm, 50 The SC640 clamp meter is packed with more features and measurements than any clamp meter in the HVACR industry. The loaded SC640 features lead storage, a swivel head, test lead holder, heavy duty magnetic strap, jaw flashlight, and a backlight on the dial so you can easily choose the right measurement in poorly lit spaces. Plus the SC640 hosts all the electrical measurements HVACR pros use everyday, along with features like True RMS, Inrush current, capacitance, temperature, duty cycle, and uA DC.

Fieldpiece Instruments SC640

Fieldpiece Instruments SC440 Essential Clamp Meter, 600 VAC/VDC, 400 amp The mid-size essential clamp meter has virtually every parameter for electrical and thermal HVACR testing in one meter. This auto and manual ranger includes a host of safety features including a high-voltage LED and beeper, a continuity warning, push button non-contact voltage (NCV), a lead holder with detachable leads and alligator probe tips for easy one-handed testing. As far as ranges go, it has temperature, capacitance, microamps DC for flame diode tests and everyday electrical ranges for HVACR

Fieldpiece Instruments SC440

Fieldpiece Instruments SC480 Wireless Clamp Meter True RMS Compatible with Job Link mobile app

SC480

Fieldpiece Instruments The SDMN5 is a portable, rugged dual-port manometer designed especially for HVACR field service technicians. Measures gas pressure, static pressure and pressure differential. The SDMN5 includes a zero adjust button of the face of the meter, a rugged rubber boot, a magnet on the back for hanging the meter during service, and the Auto Power-Off (APO) function conserves battery life. The SDMN5 measures pressure between -6inWC and 6inWC ("es of water column) and -15. to 15. mBar. The SDMN5 also measures P1 or P2 pressure readings and calculates the difference between P1 and P2. Take static pressure measurements using the resolution mode of .1 in WC or .1 mBar. Includes 3/16 to 5/16 in adapter for measuring gas inlet and outlet pressures. The SDMN5 evolved as a result of testing pressures in the field for 2 years. Its range and resolution allow you to measure the HVAC applications you run into everyday in HVAC/R field service. Measure gas pressure on the inlet and outlets with the standard 3/16 in fittings or the included adapters for 5/16 in ports, take static pressure measurements across a blower and get the pressure differential with the push of a button to check drafts. Whether you're holding the ergonomic standalone shape in your hand or hang the SDMN5 on the unit with the magnetic hanger to fill out a work order, the SDMN5 make HVAC/R field service easier and faster, with less fatigue than the other guys.

Measures duct pressures to balance air flow
• Resolution down to .1" WC for static pressure measurement
• .1" WC resolution
• 15 min auto power off
• Over range - OL or -OL is displayed
• 2 hr battery life with low battery LED indicator on displayed
• Battery - single standard 9 volt, NEDA 164, JIS 6P, IEC 6F22
• Compatible media - dry and non-corrosive gases
• SDMN5 Dual-Port Manometer, 2-3/16" Tubes with Brass Fittings, RMA316 2-3/16 - 5/16" Tube Adapters, 9 volt Battery (Installed), Operator's Manual, (2) 5/16" Adapters for Measuring Inlet and Outlet Pressures
  
  

  Fieldpiece Instruments SDMN5

Fieldpiece Instruments SIG1 Yellow 1999 Count 3.5 Digit Backlit LCD Among our most popular IR thermometers the SIG2 gun-style thermometer features a 10:1 field of view. A bright blue backlight and laser guide make taking fast and accurate temperature readings easier, better and faster. The SIG1 comes with a protective lens cap and body wrap. It works faster than thermistor based temperature instruments and has a range of -22 to 1022 deg F. Includes auto power off to conserve battery life

Fieldpiece Instruments SIG1

Fieldpiece Instruments this newly designed SPK2 folding pocket thermometer is great for taking quick air temperatures. It fits directly in your pocket so you're ready for common temperature checking. The folding rod has a hanging hook so you can easily hang it in a duct or on a grille. The large display shows min/max/hold, has measurements in both Fahrenheit and Celsius, and has a low battery indicator. It also quickly calculates T1-T2, as well as features an auto power off function to save battery power on it's already phenomenal 8000 hr of battery life on one single AA battery.

Hang on air registers or duct walls
• Large display
• Rod folds into body
• Auto off after 15 min
• Measuring range -58 to 392 deg F
  
  

  Fieldpiece Instruments SPK2

Fieldpiece Instruments SPK1 pocket knife style thermometer features a sharp tip for punching through flex duct and hangs easily from a vent or thermostat. Pull out the probe rod just like you would a pocket knife. 16 detent position grooves hold the rod at virtually at any angle. The probe rod folds away simply with no cover sleeve to lose. One of our most popular instruments for HVAC/R field service.

Convenient probe tip protection and storage
• Easily fits in shirt pocket
• Easily hangs from vent or register
• Min/Max function
• Hold function
• Auto off after 10 min
  
  

  Fieldpiece Instruments SPK1

Fieldpiece Instruments SMG5 Digital Megohmmeter, 1000 VDC, Backlit LCD The Fieldpiece Digital megohmmeter, model SMG5, is a compact standalone meter designed for checking HVAC compressor insulation. The SMG5 provides a 1000 volt source, monitors current and displays the resistance between the test points. Maximum current output is less than 1 milli-amp. It can be used to determine the condition of insulation from winding to ground in a motor, compressor, or transformer. Includes a case, alligator clip lead tip and leads with removable tips

Fieldpiece Instruments SMG5

Fieldpiece Instruments SPK3 Folding ROD Pocket Thermometer, 32 - 14 deg F, Plus/Minus 4 deg F IR, Bright Backlight, (2) AAA Battery

The SPK3 temperature pocket tool has convenient two-way temperatures with both a folding in-duct Rod temperature and an infrared 8:1 gun
• The IR takes quick surface temperature readings and the rod measures in the duct easily with a hanging hook for hands-free testing
• The SPK3 temperature tool also features max/min/hold functions, a backlight and a display that flips depending on what temperature mode is chosen
• Plus, the SPK3 quickly calculates T1-T2 and it works across both the IR and rod modes
• Great to quickly assess a system
• 8:1 IR for register and ambient temps
• Hands free in-duct measurements
• Battery life - 4 hr (IR), 75 hr (ROD)
• Auto-off - 3 min, 15 min (T1-T2 mode)
• 8:1 field of view
• .5 sec (IR), 2 sec (ROD) response time
• 8 - 14 micro-m wavelength
• .95 emissivity
• Plus/Minus 1 deg F accuracy
• 3-3/4" probe length
  
  

  Fieldpiece Instruments SPK3

Fieldpiece Instruments SM480V Charging Hose Set 3 Pack 1/4" x 60" Red,Yello,Blue Seal Right,
,

Fieldpiece Instruments SM480V

Fieldpiece Instruments This non-contact voltage detector features an analog feel. The closer the probe is to the voltage source, the louder and brighter the indicators become. Detects AC voltages without contact and features a bright red LED light and buzzer. With a 24 VAC - 440 VAC range of the SNCV1 offers technicians the ability to test thermostats and other HVAC/R parameter easily. Clips to your shirt pocket and is a quick source to find out whether that line is hot or not. Fieldpiece Instruments designs hand-held test instruments exclusively for HVACR technicians. Fieldpiece pioneered modular expandability, a concept where a single meter uses multiple slide-on accessory head instruments, to test most parameters HVACR technicians use everyday

Fieldpiece Instruments SNCV1