S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
FEATURES and BENEFITS
Sealed Combustion System: Vents exhaust gas directly outdoors and draws in 100% outside air for the burner.
Easy Open Pawl Latch: Secures the door firmly for transit, yet allows easy removal for access.
Choice of Air Conditioning Options: From 2 to 4 tons A/C ready.
Large, Effective Air Filter: Room air is cleaner with this permanent washable filter.
High Efficiency Drum Heat Exchanger: Delivers optimum heat transfer with low air resistance.
Appliance Quality Door: Protects against rust and other corrosion. Baked enamel finish allows for easy cleaning.
Fully Insulated Cabinet: Insures minimized heat loss and quiet operation.
Reliable Burner: With uniform flame pattern extends life of heat exchanger.
Nortek Global (Intertherm) MG1E077F1AAM2
Item#:
MG1E077F1AAM2
Manufacturer Item:
1036481
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Unique Manufactured Housing Design with a
robust, 19 7/8"W, fully-insulated cabinet to fit the
standard MH footprint. The MG2R is our flagship
high-efficiency, HUD-compliant, gas furnace.
AC-Ready 4-Ton ECM Blower with 5-speed taps,
with/without a factory-installed 20"H coil box;
allowing for a field-installed 20"/26"H coil box to
suit your capacity and access needs. Refer to Split
System sell sheets for AHRI-rated coil-fit matches.
Quick LP Conversion with an easy-access gas valve
regulator and manifold, using the factory-provided
LP orifices included in the unit-literature kit.
Category IV Venting Approval allows for vertical
or horizontal direct venting using an approved
non-metallic two-pipe system, or a concentric
termination kit for application flexibility.
Dependable Warranty and Support, handled
directly by Style Crests dedicated HVAC Team,
offering the most competitive warranty coverage
and service in the Manufactured Housing Industry.
Nortek Global (Intertherm) MG2R060F1ACM2
Item#:
MG2R060F1ACM2
Manufacturer Item:
1043830
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Unique Manufactured Housing Design with a
robust, 19 7/8"W, fully-insulated cabinet to fit the
standard MH footprint. The MG2R is our flagship
high-efficiency, HUD-compliant, gas furnace.
AC-Ready 4-Ton ECM Blower with 5-speed taps,
with/without a factory-installed 20"H coil box;
allowing for a field-installed 20"/26"H coil box to
suit your capacity and access needs. Refer to Split
System sell sheets for AHRI-rated coil-fit matches.
Quick LP Conversion with an easy-access gas valve
regulator and manifold, using the factory-provided
LP orifices included in the unit-literature kit.
Category IV Venting Approval allows for vertical
or horizontal direct venting using an approved
non-metallic two-pipe system, or a concentric
termination kit for application flexibility.
Dependable Warranty and Support, handled
directly by Style Crests dedicated HVAC Team,
offering the most competitive warranty coverage
and service in the Manufactured Housing Industry.
Nortek Global (Intertherm) MG2R072F1AAM1
Item#:
MG2R072F1AAM1
Manufacturer Item:
MG2R-072F1AAM1
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Unique Manufactured Housing Design with a
robust, 19 7/8"W, fully-insulated cabinet to fit the
standard MH footprint. The MG2R is our flagship
high-efficiency, HUD-compliant, gas furnace.
AC-Ready 4-Ton ECM Blower with 5-speed taps,
with/without a factory-installed 20"H coil box;
allowing for a field-installed 20"/26"H coil box to
suit your capacity and access needs. Refer to Split
System sell sheets for AHRI-rated coil-fit matches.
Quick LP Conversion with an easy-access gas valve
regulator and manifold, using the factory-provided
LP orifices included in the unit-literature kit.
Category IV Venting Approval allows for vertical
or horizontal direct venting using an approved
non-metallic two-pipe system, or a concentric
termination kit for application flexibility.
Dependable Warranty and Support, handled
directly by Style Crests dedicated HVAC Team,
offering the most competitive warranty coverage
and service in the Manufactured Housing Industry.
Nortek Global (Intertherm) MG2S045F2ABM1
Item#:
MG2S045F2ABM1
Manufacturer Item:
MG2S-045F2ABM1
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
FEATURES and BENEFITS
Sealed Combustion System: Vents exhaust gas directly outdoors and draws in 100% outside air for the burner.
Easy Open Pawl Latch: Secures the door firmly for transit, yet allows easy removal for access.
Choice of Air Conditioning Options: From 2 to 4 tons A/C ready.
Large, Effective Air Filter: Room air is cleaner with this permanent washable filter.
High Efficiency Drum Heat Exchanger: Delivers optimum heat transfer with low air resistance.
Appliance Quality Door: Protects against rust and other corrosion. Baked enamel finish allows for easy cleaning.
Fully Insulated Cabinet: Insures minimized heat loss and quiet operation.
Reliable Burner: With uniform flame pattern extends life of heat exchanger.
Nortek Global (Intertherm) MG1E090F1AAM2
Item#:
MG1E090F1AAM2
Manufacturer Item:
1036483
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
FEATURES and BENEFITS
Sealed Combustion System: Vents exhaust gas directly outdoors and draws in 100% outside air for the burner.
Easy Open Pawl Latch: Secures the door firmly for transit, yet allows easy removal for access.
Choice of Air Conditioning Options: From 2 to 4 tons A/C ready.
Large, Effective Air Filter: Room air is cleaner with this permanent washable filter.
High Efficiency Drum Heat Exchanger: Delivers optimum heat transfer with low air resistance.
Appliance Quality Door: Protects against rust and other corrosion. Baked enamel finish allows for easy cleaning.
Fully Insulated Cabinet: Insures minimized heat loss and quiet operation.
Reliable Burner: With uniform flame pattern extends life of heat exchanger.
Nortek Global (Intertherm) MG1E056F1AAM1
Item#:
MG1E056F1AAM1
Manufacturer Item:
MG1E-056F1AAM1
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
Unique Manufactured Housing Design with a
robust, 19 7/8"W, fully-insulated cabinet to fit the
standard MH footprint. The MG2R is our flagship
high-efficiency, HUD-compliant, gas furnace.
AC-Ready 4-Ton ECM Blower with 5-speed taps,
with/without a factory-installed 20"H coil box;
allowing for a field-installed 20"/26"H coil box to
suit your capacity and access needs. Refer to Split
System sell sheets for AHRI-rated coil-fit matches.
Quick LP Conversion with an easy-access gas valve
regulator and manifold, using the factory-provided
LP orifices included in the unit-literature kit.
Category IV Venting Approval allows for vertical
or horizontal direct venting using an approved
non-metallic two-pipe system, or a concentric
termination kit for application flexibility.
Dependable Warranty and Support, handled
directly by Style Crests dedicated HVAC Team,
offering the most competitive warranty coverage
and service in the Manufactured Housing Industry.
Nortek Global (Intertherm) MG2SB072F2ABM1
Item#:
MG2SB072F2ABM1
Manufacturer Item:
1048430
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
R-410A Refrigerant
Quality Compressor: State of the art compressor is standard equipment.
Hi Pressure Switches: Ensure long compressor life.
All-Aluminum Coils: Both indoor and outdoor coils are designed to optimize heat transfer, minimize
size and cost, and increase durability and reliability.
ECM Blower Motor: Fixed torque energy efficent brushless DC ECM motor, provides 5 speeds.
Permanently Lubricated Condenser Motor: A heavy duty PSC motor for long lasting reliability and quiet operation.
Requires no maintenance and is completely protected from rain and snow.
Low Voltage Transformer: Includes 3 Amp fuse to protect low voltage circuit.
Liquid Line Filter Drier: Factory installed at a convenient location for service.
Designed Using Galvanized Steel: With a polyester urethane coat finish, the 950 hour salt spray finish is 1.5 mil thick
and resists corrosion.
Compact Footprint and Profile: Make the P7 Series easy to install and transport.
"0 Clearance: To combustibles on duct side of the unit allows for installations in tight areas.
Wire Guard Coated with Earth Friendly Epoxy and Plastic Mesh Hail Guard: A guard that will never rust and protects the
units coil from being damaged.
Raised Base Pan: Allows water to drain away from the unit.
Easy Compressor and Control Access: Designed to make servicing easier for the contractor, access panels are provided to al
controls and the compressor from the front of the unit. Hi/low service ports allow refrigerant access without disrupting operation.
Easy Access: To the evaporator coil for cleaning, blower assembly removal and general maintenance.
Drain Trap: Design optimizes drainage capabilities.
Removable Top Grille Assembly: Allows ease of service to the fan motor.
Optional Electric Heat: Field installed 5 20 KW.
Notched Base Rail Supports: Allow units to be set on roof curbs or metal stands.
